Paul Moore [Tue, 29 Nov 2011 10:10:54 +0000 (10:10 +0000)]
netlabel: Fix build problems when IPv6 is not enabled
A recent fix to the the NetLabel code caused build problem with
configurations that did not have IPv6 enabled; see below:
netlabel_kapi.c: In function 'netlbl_cfg_unlbl_map_add':
netlabel_kapi.c:165:4:
error: implicit declaration of function 'netlbl_af6list_add'
This patch fixes this problem by making the IPv6 specific code conditional
on the IPv6 configuration flags as we done in the rest of NetLabel and the
network stack as a whole. We have to move some variable declarations
around as a result so things may not be quite as pretty, but at least it
builds cleanly now.
Some additional IPv6 conditionals were added to the NetLabel code as well
for the sake of consistency.
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Xi Wang [Tue, 29 Nov 2011 09:26:30 +0000 (09:26 +0000)]
sctp: better integer overflow check in sctp_auth_create_key()
The check from commit 30c2235c is incomplete and cannot prevent
cases like key_len = 0x80000000 (INT_MAX + 1). In that case, the
left-hand side of the check (INT_MAX - key_len), which is unsigned,
becomes 0xffffffff (UINT_MAX) and bypasses the check.
However this shouldn't be a security issue. The function is called
from the following two code paths:
1) setsockopt()
2) sctp_auth_asoc_set_secret()
In case (1), sca_keylength is never going to exceed 65535 since it's
bounded by a u16 from the user API. As such, the key length will
never overflow.
In case (2), sca_keylength is computed based on the user key (1 short)
and 2 * key_vector (3 shorts) for a total of 7 * USHRT_MAX, which still
will not overflow.
In other words, this overflow check is not really necessary. Just
make it more correct.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
With Dmitry fsstress updates I've seen very reproducible crashes in
xfs_attr_shortform_remove because xfs_attr_shortform_bytesfit claims that
the attributes would not fit inline into the inode after removing an
attribute. It turns out that we were operating on an inode with lots
of delalloc extents, and thus an if_bytes values for the data fork that
is larger than biggest possible on-disk storage for it which utterly
confuses the code near the end of xfs_attr_shortform_bytesfit.
Fix this by always allowing the current attribute fork, like we already
do for the attr1 format, given that delalloc conversion will take care
for moving either the data or attribute area out of line if it doesn't
fit at that point - or making the point moot by merging extents at this
point.
Also document the function better, and clean up some loose bits.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
xfs: force buffer writeback before blocking on the ilock in inode reclaim
If we are doing synchronous inode reclaim we block the VM from making
progress in memory reclaim. So if we encouter a flush locked inode
promote it in the delwri list and wake up xfsbufd to write it out now.
Without this we can get hangs of up to 30 seconds during workloads hitting
synchronous inode reclaim.
The scheme is copied from what we do for dquot reclaims.
Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Ben Myers <bpm@sgi.com>
Prasad Joshi [Sat, 26 Nov 2011 05:30:47 +0000 (11:00 +0530)]
logfs: update page reference count for pined pages
LogFS sets PG_private flag to indicate a pined page. We assumed that
marking a page as private is enough to ensure its existence. But
instead it is necessary to hold a reference count to the page.
The change resolves the following BUG
BUG: Bad page state in process flush-253:16 pfn:6a6d0
page flags: 0x100000000000808(uptodate|private)
Suggested-and-Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Heiko Carstens [Tue, 29 Nov 2011 08:33:37 +0000 (09:33 +0100)]
[S390] topology: increase poll frequency if change is anticipated
Increase cpu topology change poll frequency if a change is anticipated.
Otherwise a user might be a bit confused to have to wait up to a minute
in order to see a change this should be visible immediatly.
However there is no guarantee that the change will happen during the
time frame the poll frequency is increased.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Another round of cleanup for entry[64].S, in particular the program check
handler looks more reasonable now. The code size for the 31 bit kernel
has been reduced by 616 byte and by 528 byte for the 64 bit version.
Even better the code is a bit faster as well.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] kvm: move cmf host id constant out of lowcore
There is no reason for the cpu-measurement-facility host id constant to
reside in the lowcore where space is precious. Use an entry in the literal
pool in HANDLE_SIE_INTERCEPT and a stack slot in sie64a.
While we are at it replace the id -1 with 0 to indicate host execution.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Carsten Otte [Tue, 29 Nov 2011 08:33:32 +0000 (09:33 +0100)]
[S390] disable MACHINE_IS_VM check for pfault
This patch disables the check for MACHINE_IS_VM when initializing the
pfault infrastructure. The code checks for successful completion of
diag 258 anyway, thus it's safe to try initialization on LPAR anyway.
This is needed to use pfault on kvm
Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 29 Nov 2011 08:33:30 +0000 (09:33 +0100)]
[S390] topology: get rid of ifdefs
Remove all ifdefs from topology code and also only compile it for the
CONFIG_SCHED_BOOK case. The new code selects SCHED_MC if SCHED_BOOK is
selected. SCHED_MC without SCHED_BOOK is not possible anymore.
Furthermore various sysfs attributes are not available anymore for the
!SCHED_BOOK case. In particular all attributes that correspond to
CPU polarization.
But since all real world kernels have SCHED_BOOK selected anyway this
doesn't matter too much.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently, when smp_switch_to_ipl_cpu() is done, the backchain in the dump
analysis tool crash looks like the following:
#0 [1f746e70] __machine_kexec at 11dd92
#1 [1f746eb8] smp_restart_cpu at 11820e
#0 [00907eb0] cpu_idle at 10602e
#1 [00907ef8] start_kernel at 979a08
It would be good to see the registers of the interrupted function.
To achieve this, the backchain on the new stack has to be set to zero.
This looks then like the following:
The kernel address space of a 64 bit kernel currently uses a three level
page table and the vmemmap array has a fixed address and a fixed maximum
size. A three level page table is good enough for systems with less than
3.8TB of memory, for bigger systems four page table levels need to be
used. Each page table level costs a bit of performance, use 3 levels for
normal systems and 4 levels only for the really big systems.
To avoid bloating sparse.o too much set MAX_PHYSMEM_BITS to 46 for a
maximum of 64TB of memory.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Using the generic css_schedule_eval to evaluate subchannels
while resuming from hibernation is very slow when used with
many devices. Provide a new evaluation trigger which exploits
css_sched_sch_todo and use this in the resume callback for
ccw devices.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
[S390] add missing .set function for NT_S390_LAST_BREAK regset
The last breaking event address is a read-only value, the regset misses the
.set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we
get an oops due to a branch to zero:
Carsten Otte [Tue, 29 Nov 2011 08:32:55 +0000 (09:32 +0100)]
[S390] s390: fix page change underindication in pgste_update_all
This patch makes sure we don't underindicate _PAGE_CHANGED in case
we have a race between an operation that changes the page and this
code path that hits us between page_get_storage_key and
page_set_storage_key. Note that we still have a potential
underindication on _PAGE_REFERENCED in the unlikely event that
the page was changed but not referenced _and_ someone references
the page in the race window. That's not considered to be a problem.
Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] ptrace inferior call interactions with TIF_SYSCALL
The TIF_SYSCALL bit needs to be cleared if the debugger changes the state
of the ptraced process in regard to the presence of a system call.
Otherwise the system call will be restarted although the debugger set up
an inferior call.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: stable@kernel.org
Michael Holzheu [Tue, 29 Nov 2011 08:32:53 +0000 (09:32 +0100)]
[S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check
In order to have the same behavior for kdump based stand-alone dump
as for the kexec method, the is_kdump_kernel() check (only true for
the kexec method) has to be replaced by the OLDMEM_BASE check (true
for both methods).
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
John F Leach [Tue, 29 Nov 2011 00:41:27 +0000 (19:41 -0500)]
ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer
Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon
Roland SH-201 table entry as template. USB MIDI and audio was tested
with Muse and Audacity.
Signed-off-by: John F Leach <jfleach@jfleach.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xi Wang [Tue, 22 Nov 2011 15:55:30 +0000 (15:55 +0000)]
sctp: integer overflow in sctp_auth_create_key()
The previous commit 30c2235c is incomplete and cannot prevent integer
overflows. For example, when key_len is 0x80000000 (INT_MAX + 1), the
left-hand side of the check, (INT_MAX - key_len), which is unsigned,
becomes 0xffffffff (UINT_MAX) and bypasses the check.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 29 Nov 2011 03:28:32 +0000 (19:28 -0800)]
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: convert drivers/hwmon/* to use module_platform_driver()
hwmon: Remove redundant spi driver bus initialization
Guenter Roeck [Wed, 5 Oct 2011 00:26:04 +0000 (17:26 -0700)]
hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabled
BMR4xx devices don't have an external temperature sensor,
and instantiating it does not provide value anyway if it is disabled.
Only instantiate it if it is enabled.
Also optimize wait time between I2C chip accesses in the probe function, and
replace unnecessary check for support for I2C_FUNC_SMBUS_READ_BYTE_DATA with
now required support for I2C_FUNC_SMBUS_READ_WORD_DATA.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Guenter Roeck [Sun, 2 Oct 2011 00:35:44 +0000 (17:35 -0700)]
hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are
based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device
IDs from generic PMBus driver.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Christoph Fritz [Mon, 28 Nov 2011 22:49:33 +0000 (23:49 +0100)]
efivars: add missing parameter to efi_pstore_read()
In the case where CONFIG_PSTORE=n, the function efi_pstore_read() doesn't
have the correct list of parameters. This patch provides a definition
of efi_pstore_read() with 'char **buf' added to fix this warning:
"drivers/firmware/efivars.c:609: warning: initialization from".
Li Wei [Sun, 27 Nov 2011 21:33:34 +0000 (21:33 +0000)]
ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given.
We need to set np->mcast_hops to it's default value at this moment
otherwise when we use it and found it's value is -1, the logic to
get default hop limit doesn't take multicast into account and will
return wrong hop limit(IPV6_DEFAULT_HOPLIMIT) which is for unicast.
Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Sun, 27 Nov 2011 21:14:46 +0000 (21:14 +0000)]
net: Fix corruption in /proc/*/net/dev_mcast
I just hit this during my testing. Isn't there another bug lurking?
BUG kmalloc-8: Redzone overwritten
INFO: 0xc0000000de9dec48-0xc0000000de9dec4b. First byte 0x0 instead of 0xcc
INFO: Allocated in .__seq_open_private+0x30/0xa0 age=0 cpu=5 pid=3896
.__kmalloc+0x1e0/0x2d0
.__seq_open_private+0x30/0xa0
.seq_open_net+0x60/0xe0
.dev_mc_seq_open+0x4c/0x70
.proc_reg_open+0xd8/0x260
.__dentry_open.clone.11+0x2b8/0x400
.do_last+0xf4/0x950
.path_openat+0xf8/0x480
.do_filp_open+0x48/0xc0
.do_sys_open+0x140/0x250
syscall_exit+0x0/0x40
dev_mc_seq_ops uses dev_seq_start/next/stop but only allocates
sizeof(struct seq_net_private) of private data, whereas it expects
sizeof(struct dev_iter_state):
Guenter Roeck [Sat, 1 Oct 2011 23:50:36 +0000 (16:50 -0700)]
hwmon: (pmbus/zl6100) Add support for ZL2005
Add explicit support for ZL2005. Functionality is almost the same as with other
Zilker Labs / Intersil chips, but limit register detection does not work reliably.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Linus Torvalds [Mon, 28 Nov 2011 21:49:43 +0000 (13:49 -0800)]
Merge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: explain why per_cpu_ptr_to_phys() is more complicated than necessary
percpu: fix chunk range calculation
percpu: rename pcpu_mem_alloc to pcpu_mem_zalloc
projects / karo-tx-linux.git / log