Feng Tang [Tue, 3 May 2011 16:34:55 +0000 (17:34 +0100)]
intel_sst: make sure the sst_drop_stream() get called when needed
When "aplay test.wav", if we "ctrl+z" to suspend it, the last piece of
sound will be played endlessly. So we need make sure the drop_stream
is called in such a case.
Lu Guanqun [Tue, 3 May 2011 16:34:40 +0000 (17:34 +0100)]
intel_sst: return correct output/input device id
Without this patch, the change of output/input device can't be reflected
correctly. The mismatch reflects insane design, and should be fixed when
switching to the ASoC framework.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Tue, 3 May 2011 16:34:27 +0000 (17:34 +0100)]
intel_sst: move jack detection related configs to init time
The old policy will not enable MIC2BIAS on Moorstown platform
by default, it's only enabled when the user selects HS_MIC as input source.
Therefore when user selects DMIC and then inserts the jack,
no interrupt will be generated to notify the driver about the
jack insertion event and to take action to auto mute the speaker.
The new policy will enable this bit by default,
then no matter what the output device is, an interrupt will be generated.
This behaviour is more likely what a user expects.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ramesh Babu K V [Tue, 3 May 2011 16:33:13 +0000 (17:33 +0100)]
intel_sst: rework jack implementation
This patch fixes the below issues w.r.t jack implementation
a) The current jack implementation in driver is implemented
in intelmid.c. It has moved to vendor files for better managebility
b) Cleaned up jack reporting per upstream comments
c) Implemented jack for msic, added code to read adc and deduce jack
type based on mic bias
d) Support detection of american headset
Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
[Corrections] Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dharageswari R [Tue, 3 May 2011 16:32:38 +0000 (17:32 +0100)]
intel_sst: Line out support
This patch adds the support for lineout. The
lineout input can be selected as any input channel
by using a new alsa mixer kcontrol.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Fri, 8 Apr 2011 00:41:38 +0000 (08:41 +0800)]
sst: fix compile error
Add several include files to fix the below compile error.
drivers/staging/intel_sst/intelmid.c: In function ‘snd_intelmad_sst_register’:
drivers/staging/intel_sst/intelmid.c:805:2: error: ‘sst_drv_ctx’ undeclared (first use in this function)
drivers/staging/intel_sst/intelmid.c:805:2: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Wed, 6 Apr 2011 02:20:42 +0000 (10:20 +0800)]
sst: make register_sst_card more self-contained
register_sst_card is used in ASoC code with field `scard_ops` being NULL.
Without this patch, there will be NULL dereference.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Mon, 9 May 2011 17:47:14 +0000 (10:47 -0700)]
staging/keucr: eliminate sparse warnings in ms.c
Eliminate sparse warnings in ms.c:
drivers/staging/keucr/ms.c:28:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:31:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:789:59: warning: cast truncates bits from constant value (ffffff7f becomes 7f)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Mon, 9 May 2011 15:04:45 +0000 (16:04 +0100)]
gma500: Fix dumb create crash
The error path from gtt_alloc returns NULL not a ptr error. The underlying
fail is caused by a bug in the size calculation. With these two fixed it
passes kmstest, although it's not really doing anything useful yet.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: make use of fls bit operation in wlc_phy_compute_dB
wlc_phy_compute_dB converts absolute power value to dB implementing
a fixed point calculation for 10*log10(x). It does this by determining
the most significant bit for value x. This can be done using the fls()
bit operation, which has arch specific and possibly more efficient
implementation.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by: Roland Vossen <rvossen@broadcoom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: use int_sqrt kernel function iso driver implementation
The driver code had its own implementation for fixed point square root
calculation, but such a function is already available in the linux
kernel so the driver implementation has been removed using the kernel
function.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by: Roland Vossen <rvossen@broadcoom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: wlc_aggregatable function prototype moved
The function wlc_aggregatable is used by wl_mac80211.c. The prototype
of the function was placed in include file wlc_scb.h but the interface
for wl_mac80211.c to other driver functions is to be placed in wlc_pub.h.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by: Roland Vossen <rvossen@broadcoom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:09 +0000 (16:33 +0200)]
staging: brcm80211: move functions only used by brcmsmac out of utils
The functions gitvar() and getintvar() are only used by brcmsmac, so move them
out of the bcmutils.c file, which is shared by both brcmsmac and brcmfmac.
Henry Ptasinski [Mon, 9 May 2011 14:33:03 +0000 (16:33 +0200)]
staging: brcm80211: move files only used by brcmsmac into appropriate dir
A number of files in the util subdir are only used by the brcmsmac driver.
Move those files into the brcmsmac subdir instead, and do the necessary
Makefile updates to get the files from the new location.
staging: brcm80211: fix perimeter locking in wl_ops_bss_info_changed
Several code path in the wl_ops_bss_info_changed() callback were not
using the perimeter lock. This gives potential of raise conditions
so lock/unlock calls have been added.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Reviewed-by: Roland Vossen <rvossen@broadcoom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: sm7xx: Use kernel framebuffer mode setting
This patch implements dynamic framebuffer mode setting.
Previous code works with mode setting in a hard code way. Previous hard
code configuration is used as default configuration if dynamic mode
setting or boot mode setting (via sm712vga_setup) is not used.
Tested with SM712 supporting 1024x600x16 as default hardware resolution.
Changes:
- Implement fb_check_var and fb_set_par callbacks
- Remove __maybe_unused decorator in function being used (sm712vga_setup)
- Minor cleanup on initialization structs related with mode settings
- Updated author copyright
- Updated TODO file
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:50 +0000 (03:47 -0700)]
staging: usbip: vhci_hcd.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Move MODULE_ macros to the end of file.
Make bit_desc[] an array of const pointers.
Add KERN_ level to a couple of printks.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:44 +0000 (03:47 -0700)]
staging: usbip: stub_tx.c: coding style cleanup
Fix alignment for consistency, checkpatch.pl warnings for lines
over 80 characters, remove extraneous lines, and change conversion
specifier within a format string to remove warning.
Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 6 May 2011 15:48:27 +0000 (16:48 +0100)]
gma500: The MID devices have the register offset different
This is another small step towards getting Moorestown/Oaktrail support to
work but for Moorestown at least we still need to sort out GEM backed base
framebuffer, which means figuring out why GEM explodes early on at the
moment.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Thu, 5 May 2011 23:52:56 +0000 (18:52 -0500)]
staging: vt6655: Fix warnings if CONFIG_PM is not defined
If staging:vt6655 is built without CONFIG_DM being defined, there are large
numbers of warnings of the following form due to use of #if instead of #ifdef:
In file included from drivers/staging/vt6655/upc.h:32,
from drivers/staging/vt6655/mac.h:39,
from drivers/staging/vt6655/wroute.c:34:
drivers/staging/vt6655/device.h:399:5: warning: "CONFIG_PM" is not defined
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Grundler [Wed, 4 May 2011 16:59:47 +0000 (09:59 -0700)]
staging: brcm80211: SDIO/MMC cleanups
misc coding style cleanups to dhd_sdio/sdmmc
o replace PKTFREE2 macro with static dhdsdio_pktfree2()
o drop "delta" local var
o drop GSPI_PR55150_BAILOUT
o reformat some of the comments (white space changes)
o drop dhd_bcmsdh_recv_buf wrapper and directly call bcmsdh_recv_buf
Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: hv: make HYPERV_UTILS depend on NLS to prevent a build error
When HYPERV_UTILS=y and NLS=n the build fails with this error:
MODPOST 3 modules
ERROR: "utf8s_to_utf16s" [drivers/staging/hv/hv_utils.ko] undefined!
This patch fixes this by adding a dependency on NLS to HYPERV_UTILS.
Signed-off-by: Peter Foley <pefoley2@verizon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:15 +0000 (13:45 -0700)]
Staging: hv: VMBUS is a acpi enumerated device; get irq value from bios
On some Windows hosts, the Linux PCI sub-system is not
allocating irq resources to the
vmbus driver. It looks like VMBUS is an ACPI enumerated device.
Retrieve the irq information from DSDT.
Currently we use this bios specified irq, if the PCI
sub-system fails to allocate the irq.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:04 +0000 (13:45 -0700)]
Staging: hv: Properly handle errors in hv_pci_probe()
Much of the vmbus driver initialization is done within the hv_pci_probe()
function. Properly handle errors in hv_pci_probe so that we can
appropriately deal with loading of the vmbus driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:00 +0000 (13:45 -0700)]
Staging: hv: Get rid of vmbus_release_unattached_channels() as it is not used
Since vmbus_release_unattached_channels() is only used in module
unload path and since the vmbus driver cannot be unloaded,
get rid of this "dead" code.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:44:59 +0000 (13:44 -0700)]
Staging: hv: vmbus_driver cannot be unloaded; cleanup accordingly
The vmbus driver cannot be unloaded; the windows host does not
permit this: A) All guest resources given to the host cannot
be recovered and B) Windows host does not permit reloading the
vmbus_driver without re-booting the guest. Both these issues
are host related. Acknowledge this reality and cleanup the
vmbus driver accordingly. Note that, ideally we will want to handle
the root device through the Hyper-V block driver. In this case
unloading the vmbus driver will not be possible because of the
dependency issues.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:58 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_TRACE by BCMMSG
Code cleanup. Make code more readable by converting different macro's
(WL_TRACE, WL_AMPDU, etc) into one BCMMSG. This single macro uses wiphy_err()
instead of printk(), so the user is able to correlate a log
message to our driver. This patch only replaces WL_TRACE, subsequent patches
will replace WL_AMPDU etc.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the removal of hndcrc16 and hndcrc32 this macro is not needed
anymore. Also the crc-ccitt library functions provide an equivalent
static inline function for this operation.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: replace hndcrc16 with crc-ccitt function
The implementation of hndcrc16 is identical to that of the crc-ccitt
function available in linux kernel library functions. The driver now
uses the crc-ccitt function.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / karo-tx-linux.git / log