Neil Munro [Sun, 18 Jul 2010 22:09:37 +0000 (23:09 +0100)]
Staging: RT2860: Cleaned all bar one in chlist.h
I have cleaned all errors and all bar one warning in chlist.h. The
remaining warning is a line over 80 characters warning. Breaking it
doesnt look all that easy.
Signed-off-by: Neil Munro <neilmunro@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
memrar: Address kernel oops during resource cleanup
Some delayed initialization is performed in this driver. Make sure
resources that are used during driver clean-up (e.g. during driver's
release() function) are fully initialized before first use. This is
particularly important for the case when the delayed initialization
isn't completed, leaving behind a partially initialized driver.
Such a scenario can occur when RAR is not available on the platform,
and the driver is release()d.
Sven Eckelmann [Tue, 20 Jul 2010 22:25:22 +0000 (00:25 +0200)]
Staging: batman-adv: Update TODO with new points from review
David S. Miller provided some new ideas and found problems in his review 20100719.212625.255369607.davem@davemloft.net. These issues must be
resolved before it can be merged into net.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Tue, 20 Jul 2010 22:25:21 +0000 (00:25 +0200)]
Staging: batman-adv: don't use default init_module/cleanup_module function names
Fix two staging drivers to use module_init()/module_exit()
instead of default init_module() and cleanup_module() function names
so that there are no name conflicts when both are built-in.
drivers/staging/dt3155/built-in.o: In function `cleanup_module':
(.text+0xc0): multiple definition of `cleanup_module'
drivers/staging/batman-adv/built-in.o:(.text+0x330): first defined here
drivers/staging/dt3155/built-in.o: In function `init_module':
(.text+0xe60): multiple definition of `init_module'
drivers/staging/batman-adv/built-in.o:(.text+0x400): first defined here
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
[sven.eckelmann@gmx.de: Mark module init and exit functions as static] Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Tue, 20 Jul 2010 22:25:20 +0000 (00:25 +0200)]
Staging: batman-adv: Don't increment stats of foreign device
The receive hook for batman-adv ethernet frames tried to get the last
device which processed the skb before us. It only used that information
to update the rx_bytes and rx_packets stat of that foreign device which
already has updated it using its own receive functions.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
protocol drivers such as BT, FM and GPS when registering
to ST now provide their own private data which they expect
when their functions namely registration completed & receive
are called.
Also upon tty_close, set protos_registered count to 0, although
all protocols are marked un-registered.
Replace looping on the data buffers and printk-ing by
print_hex_dump.
Also replace most of the pr_info by pr_debug to reduce logging at
default loglevels (7 in our case..)
fix for:
drivers/staging/rtl8192su/r8192U_core.c: In function ‘rtl8192SU_MacConfigAfterFwDownload’:
drivers/staging/rtl8192su/r8192U_core.c:4403:24: warning: comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
drivers/staging/rtl8192su/r8192U_core.c:4405:30: warning: comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
Jonathan Cameron [Sun, 11 Jul 2010 15:39:15 +0000 (16:39 +0100)]
staging: iio: Fix scan_element naming issue
The addition of a number to the scan_element names caused
an issue in drivers that used either #define or an enum
to provide the number. Before this fix names like
ADIS16350_ACCEL_X_accel_x_en occur rather than 5_accel_x_en.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.
None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.
Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Mike Thomas [Sun, 11 Jul 2010 09:54:51 +0000 (10:54 +0100)]
Staging: easycap: Upsample microphone audio
Upsampling from 8000 Hz mono to 32000 Hz stereo improves audio/video
synchronization when userspace programs adopt default buffering. This
is an experimental feature.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
std.h introduces _TI_ _FLOAT_ _FIXED_ _TARGET_ ARG_TO_INT ARG_TO_PTR
which are no longer being used anywhere. we dont really need the
custom std.h header. remove it from the repo. where we need types,
introduce standard types.h
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
validBit to valid_bit
victimEntryNum to victim_entry_num
virtualAddr to virtual_addr
xType to xtype
actualValue to actual_value
EASIL1_MMUMMU_IRQSTATUSReadRegister32 to easil1_mmummu_irqstatus_read_register32
EASIL1_MMUMMU_LOCKBaseValueWrite32 to easil1_mmummu_lock_base_value_write32
easiNum to easi_num
expectedValue to expected_value
invalidValue to invalid_value
L1_base to l1_base
L2_base to l2_base
lower16Bits to lower16_bits
lower8Bits to lower8_bits
lowerMiddle8Bits to lower_middle8_bits
lowerUpper8Bits to lower_upper8_bits
maxValidValue to max_valid_value
minValidValue to min_valid_value
newValue to new_value
returnCodeIfMismatch to return_code_if_mismatch
spyCodeIfMisMatch to spy_code_if_mis_match
upper16Bits to upper16_bits
upper8Bits to upper8_bits
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
ulBrdState to brd_state
ulChnl to chnl
ulDspAddr to dsp_add
ulDspDestAddr to dsp_dest_addr
ulDspLoadAddr to dsp_load_addr
ulDspRunAddr to dsp_run_addr
ulDspSrcAddr to dsp_src_addr
ulMapAttrs to map_attr
ulMemType to mem_type
ulRMSFxn to rms_fxn
ulStatus to ret
ulVirtAddr to virt_addr
uNumDesc to num_desc
uNumToDSP to num_to_dsp
uPaSize to pa_size
uPhase to phase
uSegId to segm_id
uStream1 to stream1
uStream2 to stream2
uZId to zid
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
segmentId to segmnt_id
SetPageDirty to set_page_dirty
sizeInBytes to size_in_bytes
sleepCode to sleep_code
Status to status
symName to sym_name
szVar to sz_var
Trapped_Args to trapped_args
TTBPhysAddr to ttb_phys_addr
uChirps to chirps
uChnlId to ch_id
uChnlID to ch_id
uContentSize to cont_size
uDDMAChnlId to ddma_chnl_id
uEvents to events
ulAlign to align_mask
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
puLen to len
pulEntry to entry_pt
pulFxnAddr to fxn_addr
pulId to chan_id
pulSegId to sgmt_id
pVaBuf to va_buf
pVirtualAddress to virtual_address
pwMbVal to mbx_val
pWord to word
pXlatorAttrs to xlator_attrs
registerFxn to register_fxn
rootPersistent to root_prstnt
sectionData to section_data
sectionInfo to section_info
sectionName to section_name
sectName to sec_name
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pstrFxn to str_fxn
pstrLibName to str_lib_name
pstrSect to str_sect
pstrSym to str_sym
pstrZLFileName to str_zl_file_name
pstrZLFile to str_zl_file
pszCoffPath to sz_coff_path
pszMode to sz_mode
pszName to sz_name
pszSectName to sz_sect_name
pszUuid to sz_uuid
pszZlDllName to sz_zl_dll_name
puAddr to addr
pulAddr to addr
pulBufSize to buff_size
pulBytes to nbytes
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pPhysAddr to phys_addr
pPhysicalAddress to physical_address
ppIntfFxns to if_fxns
pProcLoadStat to proc_load_stat
pProcStat to proc_lstat
ppSym to sym_val
pRefData to ref_data
pRef to ref
preservedBit to preserved_bit
pResult to result
procID to proc_id
pSectInfo to sect_inf
pSrc to src
pstrContent to str_content
pstrDummyFile to str_dummy_file
pstrExecFile to str_exec_file
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pMemStatBuf to mem_stat_buf
pMgrAttrs to mgr_attrts
pMgrInfo to mgr_info
pNodeEnv to node_env
pNodeId to node_uuid
pNodeInfo to node_info
pNumLibs to num_libs
pNumPersLibs to num_pers_libs
pObjDef to obj_def
pObjUuid to obj_uuid
poolPhysBase to pool_phys_base
poolSize to pool_size
pPctxt to pctxt
ppDevContext to dev_cntxt
ppDrvInterface to drv_intf
pPersistentDepLibs to prstnt_dep_libs
pPhyAddr to phy_addr
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phNldrObj to nldr_ovlyobj
phNldr to nldr
phNodeMgr to node_man
pHostBuf to host_buf
pHostConfig to host_config
phRmmMgr to rmm_mgr
phStrmMgr to strm_man
phStrm to strm_objct
phXlator to xlator
physicalAddr to physical_addr
pInfo to channel_info
pIOC to chan_ioc
pLib to lib_obj
pList to lst
pMemBuf to mem_buf
========================================
projects / mv-sheeva.git / log