Oleg Drokin [Thu, 21 May 2015 19:32:18 +0000 (15:32 -0400)]
staging/lustre/llite: make llite/lov and lmv symlinks
old proc code had /proc/sys/fs/lustre/llite/.../lov and lmv
dirs that contained name of the dir in lustre/lov and lustre/lmv
to better be able to find correct obd device there, but
I imagien a better solution would be to just create a symlink with
the same name. The name is then pointless and the target dir would
have uuid file just as if it was the old-style dir.
Oleg Drokin [Thu, 21 May 2015 19:32:10 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: move procfs high_priority_ratio file to sysfs
Move ptlrpc service high_priority_ratio entry from procfs to sysfs.
Currently in use only by ldlm callback service only in
/sys/fs/lustre/ldlm/services/ldlm_cbd/
Oleg Drokin [Thu, 21 May 2015 19:32:09 +0000 (15:32 -0400)]
staging/lustre/ptlrpc: move procfs threads* files to sysfs
Move ptlrpc service threads_min, threads_max and threads_running
entries from procfs to sysfs.
Currently in use only by ldlm callback service only in
/sys/fs/lustre/ldlm/services/ldlm_cbd/
Oleg Drokin [Thu, 21 May 2015 19:32:05 +0000 (15:32 -0400)]
staging/lustre/ldlm: move procfs ldlm pool stats to sysfs
Suitable contents of /proc/fs/lustre/ldlm/namespaces/.../pools/
is moved to /sys/fs/lustre/ldlm/namespaces/.../pools/:
cancel_rate grant_plan grant_speed lock_volume_factor
server_lock_volume granted grant_rate limit recalc_period
Oleg Drokin [Thu, 21 May 2015 19:32:03 +0000 (15:32 -0400)]
staging/lustre/ldlm: remove server-side congested locks support
This code only makes sense on the server, also while we are at it
drop registration of server-side procfs values and
as all client side values were already moved to sysfs - also
drop now unused procfs helpers.
Since Lustre 2.5, cookiesize is unused on the clients since
MDS now does final object unlink by itself, so drop these
max_cookiesize and default_cookiesize files.
staging: xgifb: use arch_phys_wc_add() and ioremap_wc()
The same area used for ioremap() is used for the MTRR area.
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.
There are a few motivations for this:
a) Take advantage of PAT when available
b) Help bury MTRR code away, MTRR is architecture specific and on
x86 its replaced by PAT
c) Help with the goal of eventually using _PAGE_CACHE_UC over
_PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx,
use UC minus for ioremap(), ioremap_nocache() and
pci_mmap_page_range()")
The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.
This patch deletes all references to 'flipbuf'.Memory is allocated and
freed but never used anywhere in the driver.Also deleted an ununsed
Macro defined in the header file.
Signed-off-by: Gujulan Elango Hari Prasath <hgujulan@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wim de With [Wed, 20 May 2015 12:27:39 +0000 (14:27 +0200)]
staging: dgnc: fix line length over 80 chars in dgnc_sysfs.c
This patch fixes most of the lines over 80 characters long in
dgnc_sysfs.c. I couldn't find a way to break line 202-207 in a sensible
way. If there is a way, let me know.
Signed-off-by: Wim de With <nauxuron@wimdewith.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:45:25 +0000 (18:45 +0100)]
staging: comedi: comedi_isadma.h: make self-reliant
The Comedi "comedi_isadma.h" header is included by the source for the
"comedi_isadma" helper module and other modules that use it. It does
not compile cleanly when it is the first header file included. It uses
the `dma_addr_t` type, so include <linux/types.h> to declare it. (Also,
that indirectly takes care of the use of `NULL`.) It uses `struct
comedi_device *` in various function prototypes, so add an incomplete
declaration of `struct comedi_device`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:32:31 +0000 (18:32 +0100)]
staging: comedi: comedi_8254.h: make self-reliant
The Comedi "comedi_8254.h" header file is included by various Comedi
drivers with timer/counters based on the 8254 chip. The drivers do not
compile cleanly if this header file is included first. It uses pointers
to the `struct comedi_device`, `struct comedi_subdevice`, and `struct
comedi_insn` structures in various function prototypes, so declare those
as incomplete types. It use the `bool` type, so include
<linux/types.h>. It also uses the `__iomem` tag, but that seems to be
taken care of indirectly by including <linux/types.h>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 16:32:03 +0000 (17:32 +0100)]
staging: comedi: addi_watchdog.h: don't include "../comedidev.h"
The Comedi "addi_watchdog.h" header doesn't use anything form
"comedidev.h" apart from `struct comedi_subdevice`, which it only uses
to construct a corresponding pointer type within the parameter list of a
function prototype. Just declare the structure type incompletely and
don't bother including the header file.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 17:15:57 +0000 (18:15 +0100)]
staging: comedi: amplc_dio200.h: make self-reliant
The Comedi "amplc_dio200.h" header file included by drivers for Amplicon
DIO200 series cards does not compile cleanly when it is the first header
included by the ".c" file. It uses `struct comedi_device *` in the
parameter lists of some function prototypes, so just declare `struct
comedi_device` as an incomplete type. It also uses `bool`, so include
<linux/types.h> to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:38 +0000 (16:21 +0100)]
staging: comedi: comedi_8255: new module split from 8255
The Comedi "8255" module is both a standalone Comedi device driver
module for simple devices with one or more 8255 "Programmable Peripheral
Interface" chips at known I/O base addresses (configured at run-time),
and a helper module to configure a 8255-based digital I/O subdevice for
other Comedi drivers.
Split the "8255 subdevice helper" functionality into a new module:
"comedi_8255", leaving the standalone 8255 Comedi driver in the "8255"
module.
The Comedi "detach" routine of the standalone "8255" driver needs to
retrieve the I/O base address passed to the "comedi_8255" module to set
up each subdevice in order to release the I/O port regions it requested
in its "attach" routine. The "comedi_8255" module stores it in a
"subdevice private" data structure that is no longer known to the "8255"
module, so add a new, exported function `subdev_8255_regbase()` to
retrieve it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several Comedi driver modules call `subdev_8255_init()` or
`subdev_8255_mm_init()` to set up a digital I/O subdevice based on the
"8255" chip. One of the parameters to these functions is an optional
pointer to an I/O callback function to perform the actual register
accesses (an internal default callback function is used if NULL).
The kerneldoc for `subdev_8255_init()` and `subdev_8255_mm_init()`
describe the prototype of the optional I/O callback function
incorrectly (my fault), adding a non-existent parameter of type `struct
comedi_subdevice *`. Fix the kerneldoc. Also add parameter names to
the callback function pointer type wherever it occurs to make the usage
clearer.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:36 +0000 (16:21 +0100)]
staging: comedi: 8255.h: don't include "../comedidev.h"
The Comedi "8255.h" header doesn't use anything from "comedidev.h" apart
from `struct comedi_device` and `struct comedi_subdevice`, which are
only used to construct corresponding pointer types within the parameter
lists of function prototypes. Just declare those structure types
incompletely and don't bother including "comedidev.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 22 May 2015 15:21:35 +0000 (16:21 +0100)]
staging: comedi: 8255: fix I/O region leak on failure
The Comedi "8255" driver does not clean up properly on failure. It can
leave requested I/O port regions unreleased. Specifically, the Comedi
"attach" handler (`dev_8255_attach()`) requests a specified I/O port
region before calling `subdev_8255_init()` to set up the subdevice. If
that fails, the "attach" handler returns an error and the Comedi core
will call the "detach" handler (`dev_8255_detach()`) to clean up. The
"detach" handler is responsible for releasing the I/O port regions
successfully requested by the "attach" handler. Unfortunately, it is
unable to obtain the base address of the region if the call to
`subdev_8255_init()` failed.
Fix the I/O region leak by releasing the region in the "attach" handler
directly if the call to `subdev_8255_init()` fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 19 May 2015 22:07:27 +0000 (00:07 +0200)]
staging: lustre: remove unused variable warning
A recent patch to simplify the lustre large memory allocation
causes new warnings as an unintended side-effect:
lustre/lov/lov_request.c: In function 'lov_finish_set':
lustre/lov/lov_request.c:78:7: warning: unused variable 'len' [-Wunused-variable]
int len = set->set_oabufs * sizeof(*set->set_pga);
^
lustre/obdclass/acl.c: In function 'lustre_ext_acl_xattr_reduce_space':
lustre/obdclass/acl.c:123:6: warning: unused variable 'old_size' [-Wunused-variable]
int old_size = CFS_ACL_XATTR_SIZE(old_count, ext_acl_xattr);
^
The reason is that the 'size' argument to OBD_FREE_LARGE()
is never needed, which was previously hidden by the extra
abstractions.
This avoids the warnings by adding a cast to void, to tell
the compiler that the argument is intentionally unused.
A better fix is probably to remove the entire set of allocation
macros and open-code the normal kernel interface calls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 99d56ff7c1c ("staging/lustre: Always try kmalloc first for OBD_ALLOC_LARGE") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lov_unpackmd() there's this strange bit of code where we first try
to look inside of lmm striping pattern for it's type, and then
we check if the pattern is NULL which cannot be right.
Move the check under if (lmm) branch so that it's safe.
Oleg Drokin [Sat, 16 May 2015 07:38:31 +0000 (03:38 -0400)]
staging/lustre: Only set INTERRUPTIBLE state before calling schedule
In __l_wait_event the condition could be a complicated function that does
allocations and other potentialy blocking activities, so it sohuld
not be called in a task state other than RUNNABLE
projects / linux-beck.git / log