Paul Gortmaker [Sat, 13 Feb 2016 23:20:17 +0000 (18:20 -0500)]
drivers/staging/android: don't use modular references in sync_debug.c
In commit 8a0044846115e74552b671a7073cffeec14b9316 ("staging/android:
create a 'sync' dir for debugfs information"), modular references were
introduced to this file. However if we look, we find:
Bhumika Goyal [Sat, 13 Feb 2016 13:19:34 +0000 (18:49 +0530)]
Staging: wlan-ng: Drop wrapper function
Drop the function prism2mgmt_pstr2bytearea and replace its function call
with the standard function memcpy that it wrapped.
The code becomes cleaner after this patch.
staging: wilc1000: Simplify code by eliminating else block
Remove else block here as it is not useful after the return statement in the corresponding if block. This simplifies code. This issue was identified by checkpatch.
Chaehyun Lim [Fri, 12 Feb 2016 14:04:46 +0000 (23:04 +0900)]
staging: wilc1000: rename result in handle_set_channel
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt.
Some handle_*() function are used as result, others are used as ret.
It will start to rename as ret in all handle_*() function to sync up
with this variable name.
Chaehyun Lim [Fri, 12 Feb 2016 14:04:44 +0000 (23:04 +0900)]
staging: wilc1000: change handle_set_channel's return type to void
When handle_set_channel is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due
to have a single statement.
Chaehyun Lim [Fri, 12 Feb 2016 14:04:42 +0000 (23:04 +0900)]
staging: wilc1000: rename u8security in user_conn_req
This patch renames u8security to security to remove u8 prefix in struct
user_conn_req. There is no need to use prefix to show data type of this
variable.
Alison Schofield [Fri, 12 Feb 2016 18:05:01 +0000 (10:05 -0800)]
staging: vt6656: replace GFP_ATOMIC with GFP_KERNEL for urb allocation
Replace GFP_ATOMIC with GFP_KERNEL during urb buffer allocation.
This makes vnt_alloc_bufs() consistent in setting GFP_KERNEL during
kmalloc() and usb_alloc_urb(). GFP_KERNEL is safe because we are in
process context, not in an interrupt handler, nor holding any spinlock.
Niranjan Dighe [Sun, 14 Feb 2016 03:21:48 +0000 (08:51 +0530)]
staging: lustre/lnet: Fix wrong typecasting warning generated by sparse
Fix the following warning generated about type casting by sparse
warning: cast removes address space of expression
The current implementation casts the structure pointers with (char *)
without __user annotation and then adds sizeof struct to it, thereby
generating the sparse warning. Fixed this by removing the unnecessary
char pointer type cast.
James Simmons [Fri, 12 Feb 2016 17:05:59 +0000 (12:05 -0500)]
staging: lustre: drop *_t from end of struct lnet_text_buf
When lnet_text_buf data structure was transform from typedef
to struct the *_t which is typical of typedef was not drop.
This patch removes the *_t to be consistent.
Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-4.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
2nd round of new IIO device support, features and cleanups for the 4.6 cycle.
New Device Support
* Apex stx104 DAC
- new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
- Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
- Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
- add support for the ad7193
* Invensense mpu6050
- substantial rework of driver to use regmap allowing SPI support extending
the now split driver to cover the MPU6000.
* TI adc0832
- new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
- new driver, note that there is an existing hwmon driver. The long term
intention is to probably remove the hwmon driver but for now we just have
guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
- new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
- new driver for this heart rate monitor / pulse oximeter front end chip.
Staging Graduations
* mxs-lradc
- A combined general purpose and touch screen (input) device driver.
Originally held in staging to allow reworking into and MFD but as
that wasn't happening and isn't an absolute requirement we are moving
it out of staging.
Driver new features
* ms5611
- triggered buffer support
- IIO_CHAN_INFO_SCALE to aid the triggered buffer support.
Driver cleanups / reworks / fixes
* ad5064
- Use an enum for the register map layout to allow support of additional
chips (precursor to the new support listed above).
- Structural driver changes to allow support of the slightly different
handling for the ltc parts above.
* ad5933
- drop an exceptional & unnecessary for a function pointer.
* ad7606
- Cleanup the repeated copies of pm ops.
- consolidate the various channels specs via a sport of rearranging so only
one version is needed.
* atlas ph sensor
- add select IRQ_WORK
* hmc8543 (soon to move out of staging)
- Comment style fixes
- functionality of suspend and resume was swapped.
* spear-adc
- use devm_clk_dev instead of managing the clk lifetime by hand.
Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
the core cutting out some cut and paste versions of the same code.
Daniel Baluta [Thu, 11 Feb 2016 13:49:54 +0000 (15:49 +0200)]
iio: adc: Add TI ADS1015 ADC driver support
The driver has sysfs readings with runtime PM support for power saving.
It also offers buffer support that can be used together with IIO software
triggers.
Datasheet can be found here:
http://www.ti.com.cn/cn/lit/ds/symlink/ads1015.pdf
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: Add IIO support for the DAC on the Apex Embedded Systems STX104
The Apex Embedded Systems STX104 is a 16-channel 16-bit analog input and
2-channel 16-bit analog output PC/104 card. The STX104 incorporates a
large one mega-sample FIFO.
This driver provides IIO support for the 2-channel DAC on the STX104.
The base port addresses for the devices may be configured via the "base"
module parameter array.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Adriana Reus [Fri, 12 Feb 2016 11:44:45 +0000 (13:44 +0200)]
iio: imu: inv_mpu6050: Add SPI support for MPU6000
The only difference between the MPU6000 and the
MPU6050 is that the first also supports SPI.
Add SPI driver for this chip.
Signed-off-by: Adriana Reus <adriana.reus@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Adriana Reus [Fri, 12 Feb 2016 11:44:44 +0000 (13:44 +0200)]
iio: imu: inv_mpu6050: Separate driver into core and i2c functionality.
Separate this driver into core and i2c functionality.
This is in preparation for adding spi support.
Signed-off-by: Adriana Reus <adriana.reus@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Adriana Reus [Fri, 12 Feb 2016 11:44:43 +0000 (13:44 +0200)]
iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions
Use regmap instead of i2c specific functions.
This is in preparation of splitting this driver into core and
i2c specific functionality.
Signed-off-by: Adriana Reus <adriana.reus@intel.com> Acked-by: Crt Mori <cmo@melexis.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The select/deselect_bypass duo writes the irq number into the interrupt
configuration register.
If there is a i2c slave device connected to the mpu (eg. a magnetometer)
then this can hinder interrupt delivery for the accelerometer and
gyroscope.
Set this register to the default configuration.
Signed-off-by: Adriana Reus <adriana.reus@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Andrew Bradford [Fri, 12 Feb 2016 01:38:05 +0000 (20:38 -0500)]
staging: rtl8188eu: fix signal strength indication
RTL8188E can only have a maximum of 2 chains so match that in the actual
phy_rx_agc_info structure within phy_status_rpt. This will cause the
other data received from the PHY, such as signal strength indication of
beacons, to properly align and allow extraction and use within the
signal strength record-keeping mechanisms.
Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rtl8723au: Use ARRAY_SIZE macro for sizes of arrays
Use ARRAY_SIZE to calculate the size of an array to make code concise.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2b
Haneen Mohammed [Thu, 11 Feb 2016 18:34:40 +0000 (21:34 +0300)]
Staging: vt6655: Add check dma_mapping_error
This patch checks for dma_mapping_error() after using dma_map_single.
If the dma map fails we release skb buff allocated by dev_alloc_skb() to
avoid possible causes of resource leak.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PANEL_DISPLAY_CTRL_TFT_DISP definitions artificially encode
PANEL_DISPLAY_CTRL_DUAL_DISPLAY and PANEL_DISPLAY_CTRL_DOUBLE_PIXEL bits
combinations. Replace the PANEL_DISPLAY_CTRL_TFT_DISP usage with direct use
of the bits defined in the datasheet.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Wed, 10 Feb 2016 16:34:06 +0000 (18:34 +0200)]
staging: sm750fb: refactor setDisplayControl function
The enable/disbable sequence in setDisplayControl function is duplicated
for primary and secondary display controllers. The function can be
refactored so that the common part of register access will be shared for
both controllers.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Wed, 10 Feb 2016 16:34:04 +0000 (18:34 +0200)]
staging: sm750fb: share common bits in display control registers
The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log