Paul Burton [Tue, 1 Mar 2016 02:37:58 +0000 (02:37 +0000)]
MIPS: Handle highmem pages in __update_cache
The following patch will expose __update_cache to highmem pages. Handle
them by mapping them in for the duration of the cache maintenance, just
like in __flush_dcache_page. The code for that isn't shared because we
need the page address in __update_cache so sharing became messy. Given
that the entirity is an extra 5 lines, just duplicate it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable <stable@vger.kernel.org> # v4.1+
Patchwork: https://patchwork.linux-mips.org/patch/12721/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 1 Mar 2016 02:37:57 +0000 (02:37 +0000)]
MIPS: Flush highmem pages in __flush_dcache_page
When flush_dcache_page is called on an executable page, that page is
about to be provided to userland & we can presume that the icache
contains no valid entries for its address range. However if the icache
does not fill from the dcache then we cannot presume that the pages
content has been written back as far as the memories that the dcache
will fill from (ie. L2 or further out).
This was being done for lowmem pages, but not for highmem which can lead
to icache corruption. Fix this by mapping highmem pages & flushing their
content from the dcache in __flush_dcache_page before providing the page
to userland, just as is done for lowmem pages.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12720/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Tue, 1 Mar 2016 02:37:56 +0000 (02:37 +0000)]
MIPS: Flush dcache for flush_kernel_dcache_page
The flush_kernel_dcache_page function was previously essentially a nop.
This is incorrect for MIPS, where if a page has been modified & either
it aliases or it's executable & the icache doesn't fill from dcache then
the content needs to be written back from dcache to the next level of
the cache hierarchy (which is shared with the icache).
Implement this by simply calling flush_dcache_page, treating this
kmapped cache flush function (flush_kernel_dcache_page) exactly the same
as its non-kmapped counterpart (flush_dcache_page).
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12719/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Wed, 13 May 2015 15:17:14 +0000 (16:17 +0100)]
MIPS: cpu: Convert MIPS_CPU_* defs to (1ull << x)
The MIPS_CPU_* definitions have now filled the first 32-bits, and are
getting longer since they're written in hex without zero padding. Adding
my 8 extra MIPS_CPU_* definitions which I haven't upstreamed yet this is
getting increasingly ugly as the comments get shifted progressively to
the right. Its also error prone, and I've seen this cause mistakes on 3
separate occasions now, not helped by it being a conflict hotspot.
Convert all the MIPS_CPU_* definitions to the form (1ull << x). Humans
are better at incrementing than shifting.
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization,
make it compatible with run-time detection of the CPU, and unroll the
brcmstb-specific macros: BDEV_RB(), BDEV_UNSET.
The "pref 30" disabling is done as a quirk. This is a preliminary change to
allow the use of the "rotr" instruction gated by cpu_has_rixi.
Florian Fainelli [Sun, 31 Jan 2016 20:29:27 +0000 (12:29 -0800)]
BUS: brcmstb_gisb: Hook to MIPS board_be_handler
MIPS kernels allow platforms to invoke a custom Bus Error handler, add the
necessary code to do this for Broadcom SoCs where the GISB bus error handler can be used.
We may get a bus error from an address decoded outside of the GISB bus space,
so we need to check the validity of such a capture before printing anything.
Paul Burton [Thu, 4 Feb 2016 13:05:05 +0000 (13:05 +0000)]
MIPS: Support R_MIPS_PC{16,21,26} rel-style relocs
MIPS32 code uses rel-style relocs, and MIPS32r6 modules may include
R_MIPS_PC16, R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to
support these relocations in order to load MIPS32r6 kernel modules. This
patch adds such support, which is similar to the rela-style support in
module-rela.c but making use of the implicit addend from the instruction
encoding.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12435/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Thu, 4 Feb 2016 13:05:04 +0000 (13:05 +0000)]
MIPS: Support R_MIPS_PC{21,26} rela-style relocs
MIPS64 code uses rela-style relocs, and MIPS64r6 modules may include the
new R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these
relocations in order to load MIPS64r6 kernel modules. They are similar
to the existing R_MIPS_PC16 relocation but applying to a wider field.
Implement support for them by genericising the existing R_MIPS_PC16
implementation such that it can be used for different field widths, and
calling it for all 3 reloc types.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12434/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 12:06:35 +0000 (12:06 +0000)]
MIPS: SEAD3 can support MIPS32r6 CPUs
There are CPUs/bitfiles available for use with SEAD3 boards which
implement release 6 of the MIPS architecture. Allow building the kernel
for such a system.
Paul Burton [Wed, 3 Feb 2016 03:15:35 +0000 (03:15 +0000)]
MIPS: smp-cps: Stop printing EJTAG exceptions to UART
When CONFIG_MIPS_CPS_NS16550 is enabled, some register state is dumped
to the UART when an exception is taken via the BEV on secondary cores.
EJTAG exceptions are architecturally expected to be handled by the BEV
even when Status.BEV is 0. This effectively means that if userland
executes an sdbbp instruction on a secondary core then the kernel dumps
register state to the UART even though the exception is perfectly normal
& expected. Prevent this by simply not dumping information to the UART
for EJTAG exceptions.
Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:34 +0000 (03:15 +0000)]
MIPS: smp-cps: Add nothreads kernel parameter
When debugging a new system or core it can be useful to disable the use
of multithreading. Introduce a "nothreads" kernel command line parameter
that can be set in order to do so.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:33 +0000 (03:15 +0000)]
MIPS: smp-cps: Support MIPSr6 Virtual Processors
Introduce support for bringing up Virtual Processors in MIPSr6 systems
as CPUs, much like their VPE parallel from the now-deprecated MT ASE.
The existing mips_cps_boot_vpes function fits the MIPSr6 architecture
pretty well - it can now simply write the mask of running VPs to the
VC_RUN register, rather than looping through each & starting or stopping
as appropriate as is done for VPEs from the MT ASE. Thus the VP support
is in general an extension & simplification of the existing MT ASE VPE
(aka SMVP) support.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:32 +0000 (03:15 +0000)]
MIPS: smp-cps: Skip core setup if coherent
In preparation for supporting MIPSr6 multithreading (ie. VPs) which will
begin execution from the core reset vector, skip core level setup if the
core is already coherent. This is never the case when a core is first
started, since boot_core explicitly clears the cores GCR_Cx_COH_EN
register, and always the case when secondary VPs start since the first
VP to start will have enabled coherence after initialising the core &
its caches.
One notable side effect of this patch is that eva_init gets called
slightly earlier, prior to mips_cps_core_init rather than after it.
Paul Burton [Wed, 3 Feb 2016 03:15:31 +0000 (03:15 +0000)]
MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpes
The mips_cps_boot_vpes function previously included code to retrieve
pointers to the core & VPE boot configuration structs. These structures
were used both by mips_cps_boot_vpes and by its mips_cps_core_entry
callsite. In preparation for skipping the call to mips_cps_boot_vpes on
some invocations of mips_cps_core_entry, pull the calculation of those
pointers out into a separate function such that it can continue to be
shared.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:30 +0000 (03:15 +0000)]
MIPS: smp-cps: Pull cache init into a function
In preparation for further modifications to mips_cps_core_entry, pull
the L1 cache initialisation out into a separate function. This both
makes the code in mips_cps_core_entry read more clearly, particularly
when modifying it, and shortens it which will become important as code
is added that needs to continue to fit within the reset vector.
Paul Burton [Wed, 3 Feb 2016 03:15:29 +0000 (03:15 +0000)]
MIPS: smp-cps: Ensure our VP ident calculation is correct
When bringing up a CPU, ensure that its local ID as provided by the GIC
matches up with our calculation of it. This is vital, since if the
condition doesn't hold then we won't have configured interrupts
correctly for the VP.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:28 +0000 (03:15 +0000)]
irqchip: mips-gic: Provide VP ID accessor
Provide a gic_read_local_vp_id() function to read the VCNUM field of the
GICs local VP_IDENT register. This will be used by a further patch to
check that the value reported by the GIC matches up with the kernels
calculation.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:27 +0000 (03:15 +0000)]
irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR
The Linux CPU number doesn't necessarily match up with the ID used for a
VP by hardware. Convert the CPU number to the HW ID using mips_cm_vp_id
when writing to the VP(E)_OTHER_ADDR register in order to ensure that we
correctly access registers for the VPs of secondary cores. This most
notably affects systems using CM3, such as those based around I6400.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:26 +0000 (03:15 +0000)]
MIPS: CM: Fix mips_cm_max_vp_width for UP kernels
Fix mips_cm_max_vp_width for UP kernels where it previously referenced
smp_num_siblings, which is not declared for UP kernels. This led to
build errors such as the following:
drivers/built-in.o: In function `$L446':
irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings'
drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow
On UP kernels simply return 1, leaving the reference to smp_num_siblings
in place only for SMP kernels.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Markos Chandras [Wed, 3 Feb 2016 03:15:23 +0000 (03:15 +0000)]
MIPS: pm-cps: Avoid offset overflow on MIPSr6
This is similar to commit 934c79231c1b ("MIPS: asm: r4kcache: Add MIPS
R6 cache unroll functions"). The CACHE instruction has been redefined
for MIPSr6 and it reduced its offset field to 8 bits. This leads to
micro-assembler field overflow warnings when booting SMP MIPSr6 cores
like the following one:
Markos Chandras [Wed, 3 Feb 2016 03:15:22 +0000 (03:15 +0000)]
MIPS: traps: Make sure secondary cores have a sane ebase register
We shouldn't trust that the secondary cores will have a sane ebase register
(either from the bootloader or during the hardware design phase) so use the
ebase address as calculated by the boot CPU.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Wed, 3 Feb 2016 03:15:21 +0000 (03:15 +0000)]
MIPS: Detect MIPSr6 Virtual Processor support
MIPSr6 introduces support for "Virtual Processors", which are
conceptually similar to VPEs from the now-deprecated MT ASE. Detect
whether the system supports VPs using the VP bit in Config5, adding
cpu_has_vp for use by later patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Antony Pavlov [Thu, 17 Mar 2016 03:34:17 +0000 (06:34 +0300)]
MIPS: dts: qca: introduce AR9331 devicetree
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.
Antony Pavlov [Thu, 17 Mar 2016 03:34:15 +0000 (06:34 +0300)]
MIPS: ath79: update devicetree clock support for AR9132
Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. E.g. you can set any clock rate value
in board DTS but it will have no effect on the real clk calculation.
This patch fixes some AR9132 devicetree clock support defects:
* clk initialization function ath79_clocks_init_dt_ng()
is introduced; it actually gets pll block base register
address and reference clock from devicetree;
* pll register parsing code is moved to the separate
ar724x_clk_init() function; this function
can be called from platform code or from devicetree code.
Also mips_hpt_frequency value is set from dt, so the appropriate
clock parameter is added to the cpu@0 devicetree node.
The same approach can be used for adding AR9331 devicetree support.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Antony Pavlov [Thu, 17 Mar 2016 03:34:12 +0000 (06:34 +0300)]
MIPS: dts: qca: ar9132: use short references for dt nodes
Here are some Sascha Hauer's arguments for using aliases in the dts
files:
- using aliases reduces the number of indentations in dts files;
- dts files become independent of the layout of the dtsi files
(it becomes possible to introduce another bus {} hierarchy between
a toplevel bus and the devices when you have to);
- less chances for typos. if &i2c2 does not exist you get an error.
If instead you duplicate the whole path in the dts file a typo
in the path will just create another node.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Sat, 19 Mar 2016 17:28:52 +0000 (18:28 +0100)]
MIPS: Lantiq: Make it possible to build in no device tree
Now it is possible to build in no device tree at all and depend on the
boot loader providing one or someone concatenating a device tree to the
end of the image.
Hauke Mehrtens [Sat, 19 Mar 2016 17:28:51 +0000 (18:28 +0100)]
MIPS: Lantiq: Add support for device tree file from boot loader
This fetches the device tree file like it is specified in the MIPS UHI
interface if one was found. This is also used when the device tree file
was appended to the kernel image with cat.
This code is copied from arch/mips/bmips/setup.c.
Aaro Koskinen [Tue, 8 Mar 2016 21:32:26 +0000 (23:32 +0200)]
MIPS: Octeon: Add DTS for D-Link DSR-1000N
Add DTS for D-Link DSR-1000N that is usable as is without any "pruning"
with APPENDED_DTB. Split out the common parts from octeon_3xxx.dts
into octeon_3xxx.dtsi.
Compared to builtin generic DTB, we can specificy fixed links properly
and avoid probing non-existent I2C devices.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Aaro Koskinen [Wed, 9 Mar 2016 20:08:42 +0000 (22:08 +0200)]
MIPS: panic immediately when panic_on_oops
MIPS wants to sleep 5 seconds before panicking when panic_on_oops is set,
with no apparent reason. Remove this feature, since some users may want
their systems to fail as quickly as possible.
Users who want to delay reboot after panic can use PANIC_TIMEOUT.
Rafał Miłecki [Mon, 25 Jan 2016 08:50:29 +0000 (09:50 +0100)]
MIPS: BCM47xx: Move SPROM driver to drivers/firmware/
Broadcom ARM home routers store SPROM content in NVRAM just like MIPS
ones. To share SPROM code we need to move it out of arch/mips/ to some
common place. We already have bcm47xx_nvram in firmware path and SPROM
should fit there as well.
This driver is responsible for parsing SoC configuration data into a
struct shared between ssb and bcma buses.
This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0
(ARCH_BCM_5301X).
Aaro Koskinen [Mon, 22 Feb 2016 22:22:57 +0000 (00:22 +0200)]
MIPS: Octeon: Use model string from DTB for unknown board type
Use model string from DTB for board type if the board is unknown.
This is more informative, e.g. with EdgeRouter Pro the /proc/cpuinfo
will display "ubnt,e200 (CN6120p1.1-1000-NSP)" instead of misleading
"Unsupported Board".
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12582/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Tue, 9 Feb 2016 19:00:06 +0000 (11:00 -0800)]
MIPS: OCTEON: Remove some code limiting NR_IRQS to 255
Follow-on patches for OCTEON III will increase the number of irqs to
potentially more than 256.
Increase the width of the octeon_irq_ciu_to_irq to int to be able to
handle this case. Remove the hacky code that verified that u8 would
not be overflowed.
David Daney [Tue, 2 Feb 2016 01:46:54 +0000 (17:46 -0800)]
MIPS: OCTEON: Extend number of supported CPUs past 32
To support more than 48 CPUs, the bootinfo structure grows a new
coremask structure. Add the definition of the structure and add it to
struct cvmx_bootinfo. In prom_init(), copy the new coremask data into
the sysinfo structure, and use it in smp_setup().
Ralf Baechle [Thu, 28 Jan 2016 13:26:00 +0000 (14:26 +0100)]
MIPS: highmem: Turn flush_cache_kmaps into a no-op.
It was calling flush_cache_all() which is a no-op since a long time anyway
and which was overkill in the old days when it was actually doing something
because only the D-cache needs to be flushed, never the I-cache, never
the S-cache. Since however highmem on MIPS is still only supported on
processors that don't suffer from cache aliases, we could turn
flush_cache_kmaps() into a no-op - but for paranoia's sake we rather make
it BUG_ON(cpu_has_dc_aliases()).
Alban Bedel [Tue, 26 Jan 2016 08:38:29 +0000 (09:38 +0100)]
MIPS: ath79: Add zboot debug serial support
Reuse the early printk code to support the serial in zboot. We copy
early_printk.c instead of referencing it because we need to build a
different object file for the normal kernel and zboot.
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12234/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
A couple of netlogic assembly files define CP0_EBASE to $15, the same as
CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and
CP0_EBase registers. However commit 609cf6f2291a ("MIPS: CPS: Early
debug using an ns16550-compatible UART") added a different definition of
CP0_EBASE to mipsregs.h, which included a register select of 1. This
causes harmless build warnings like the following:
arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined
#define CP0_EBASE $15
^
In file included from arch/mips/netlogic/common/reset.S:41:0:
./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition
#define CP0_EBASE $15, 1
^
Update the code to use the definitions from mipsregs.h for accessing
both registers.
Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13183/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: Adjust set_pte() SMP fix to handle R10000_LLSC_WAR
Update the recent changes to set_pte() that were added in 46011e6ea392
to handle R10000_LLSC_WAR, and format the assembly to match other areas
of the MIPS tree using the same WAR.
This also incorporates a patch recently sent in my Markos Chandras,
"Remove local LL/SC preprocessor variants", so that patch doesn't need
to be applied if this one is accepted.
James Hogan [Fri, 15 Apr 2016 09:07:26 +0000 (10:07 +0100)]
MIPS: Fix MSA assembly warnings
Building an MSA capable kernel with a toolchain that supports MSA
produces warnings such as this:
arch/mips/kernel/r4k_fpu.S:229: Warning: the `msa' extension requires 64-bit FPRs
This is due to ".set msa" without ".set fp=64" in the non doubleword MSA
load/store macros, since MSA requires the 64-bit FPU registers (FR=1).
Add the missing fp=64 in these macros to silence the warnings.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13063/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Fri, 15 Apr 2016 09:07:25 +0000 (10:07 +0100)]
MIPS: Fix MSA assembly with big thread offsets
When lockdep is enabled on a 64-bit kernel the FPR offset into the
thread structure exceeds the maximum range of the MSA ld.d/st.d
instructions. For example THREAD_FPR31 = 4644 (instead of 2448), while
the signed immediate field is only 10 bits with an implicit multiply by
8, giving a maximum offset of 511*8 = 4088.
This isn't a problem when the toolchain doesn't support MSA as the
ld_*/st_* macros perform the addition separately into $1 with [d]addui
which has a 16bit signed immediate field.
Fix the case where the toolchain does support MSA by doing a single
addition of THREAD_FPR0 into $1 with [d]addui, and doing the ld_*/st_*
relative to that.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13064/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Fri, 15 Apr 2016 09:07:24 +0000 (10:07 +0100)]
MIPS: Fix MSA ld_*/st_* asm macros to use PTR_ADDU
The MSA ld_*/st_* assembler macros for when the toolchain doesn't
support MSA use addu to offset the base address. However it is a virtual
memory pointer so fix it to use PTR_ADDU which expands to daddu for
64-bit kernels.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.3.y-
Patchwork: https://patchwork.linux-mips.org/patch/13062/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 15 Apr 2016 09:07:23 +0000 (10:07 +0100)]
MIPS: Use copy_s.fmt rather than copy_u.fmt
In revision 1.12 of the MSA specification, the copy_u.w instruction has
been removed for MIPS32 & the copy_u.d instruction has been removed for
MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will
complain about this like so:
arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this
processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]'
Since we always copy to the width of a GPR, simply use copy_s instead of
copy_u to fix this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.3.x+
Patchwork: https://patchwork.linux-mips.org/patch/13061/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Redfearn [Mon, 21 Dec 2015 15:21:42 +0000 (15:21 +0000)]
MIPS: dma-default: Defend against NULL dev in massage_gfp_flags
This patch ensures that the dev parameter is checked for NULL before it
is dereferenced in massage_gfp_flags. If dev is NULL, then fall back
setting the GFP flag requested and available.
Yanjiang Jin [Wed, 9 Dec 2015 03:15:27 +0000 (11:15 +0800)]
MIPS: oprofile: Fix a preemption issue
Use boot_cpu_type() instead of current_cpu_type() in oprofile_arch_init()
to avoid the below warning, cpu_type is normally consistent in a MIPS SMP
system. There are a few exceptions such as SGI servers where it is
possible to mix R10000, R12000, R14000 and R16000 within certain
constraints. Let's not worry about those now.
Huacai Chen [Thu, 17 Mar 2016 12:41:06 +0000 (20:41 +0800)]
MIPS: Loongson-3: Fix build error after ld-version.sh modification
Commit d5ece1cb074b2c ("Fix ld-version.sh to handle large 3rd version
part") modifies the ld version description. This causes a build error
on Loongson-3, so fix it.
projects / karo-tx-linux.git / log