staging: comedi: das1800: fix analog input sample munging
The analog input samples are 2's complement when the inputs are configured
for bipolar ranges and offset binary when they are unipolar ranges. For
bipolar ranges the sample needs to be munged to the offset binary format
that comedi uses.
The (*insn_read) does the munging correctly but the async command support
incorrectly munges the data for both bipolar and unipolar ranges when
reading the remaining samples from the fifo in das1800_handle_fifo_not_empty().
Add a (*munge) function to the analog input subdevice so that the samples
are correctly munged when they are added to the async buffer by
comedi_buf_write_samples(). Add a flag to the private data and set it in
the (*do_cmd) so that the munging is only done for bipolar ranges.
Clarify the code by using the core helper functions to check the range and
do the munging.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: fix possible NULL dereference
DMA is optional with this driver. If it was not enabled the devpriv->dma
pointer will be NULL.
Fix the possible NULL pointer dereference when trying to disable the DMA
channels in das1800_ai_cancel() and tidy up the comments to fix the
checkpatch.pl issues:
WARNING: line over 80 characters
It's probably harmless in das1800_ai_setup_dma() because the 'desc' pointer
will not be used if DMA is disabled but fix it there also.
Fixes: 99dfc3357e98 ("staging: comedi: das1800: remove depends on ISA_DMA_API limitation") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Wed, 13 Apr 2016 15:56:36 +0000 (11:56 -0400)]
staging: unisys: visornic: convert BUG_ON to dev_err() message
The caller of visor_copy_fragsinfo_from_skb() is prepared to log a
dev_err() message if it fails (by returning a negative value), so we now
just fail in the one occasion where visor_copy_fragsinfo_from_skb() was
doing a BUG_ON.
There was also a problem before where visor_copy_fragsinfo_from_skb() was
returning a negative to indicate error, yet it was declared to return an
unsigned value! So obviously that needed correcting too.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: wilc1000: rename result in handle_set_ip_address
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
staging: wilc1000: change data type of result in handle_set_ip_address
This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
staging: wilc1000: change handle_set_ip_address's return type to void
When handle_set_ip_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.
staging: wilc1000: rename result in handle_set_operation_mode
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
staging: wilc1000: change data type of result in handle_set_operation_mode
This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
staging: wilc1000: change handle_set_operation_mode's return type to void
When handle_set_operation_mode is called in hostIFthread that is a
kernel thread, it is not checked return type of this function. This
patch changes return type to void and removes braces if statement due to
have a single statement.
staging: wilc1000: rename result in handle_set_wfi_drv_handler
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() function are used as result,
others are used as ret. It will be changed as ret in all handle_*()
function to match variable name.
staging: wilc1000: change data type of result in handle_set_wfi_drv_handler
This patch changes data type of result variable from s32 to int.
result is used to get return value from wilc_send_config_pkt that has
return type of int.
staging: wilc1000: change handle_set_wfi_drv_handler's return type to void
When handle_set_wfi_drv_handler is called in hostIFthread that is a
kernel thread, it is not checked return type of this function. This
patch changes return type to void and removes braces if statement due to
have a single statement.
Leo Kim [Fri, 1 Apr 2016 08:44:19 +0000 (17:44 +0900)]
staging: wilc1000: adds a check routine when performed del_key()
This patch is adds a check routine when performed del_key().
We was find this situation while test the 'rmmod sdio'.
That is received inform a .del_key cmd from cfg80211.
If is not exist wep keys, must be ignore a wilc_remove_wep_key() function.
Thus, adds a check routine that key length of wep.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:18 +0000 (17:44 +0900)]
staging: wilc1000: adds a cfg80211_disconnected() function
This patch is adds a cfg80211_disconnected() when connection is lost already.
We was find this situation while test the 'rmmod sdio'.
SDIO remove function are include both remove mac_close and unregister net_device.
That is received one more a disconnect cmd from cfg80211.
Driver was already performed disconnect.
If wilc->close value was set to true, adds a call to cfg80211_disconnected().
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:15 +0000 (17:44 +0900)]
staging: wilc1000: txq_thread_started: replaces a semaphore with a completion
This patch replaces a semaphore(txq_thread_started) with a completion.
Struct semaphore txq_thread_started is used to signal completion of txq thread.
It is better to use completion than semaphore for this case.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:13 +0000 (17:44 +0900)]
staging: wilc1000: changes logic when happened mq_send fail
This patch changes logic when happened mq_send fail.
The check as a result value that mq_send fail.
But, regardless of the result value then perform a semaphore up.
That is an occur that semaphore locking.
Add to 'else' routine and move to 'else' position a semaphore up.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Thu, 28 Apr 2016 16:07:38 +0000 (12:07 -0400)]
staging: lustre: llite: quiet overly verbose info message
The client doesn't need to print a message for every client mount that
the layout lock feature is enabled. This can be found at runtime via
the "import" proc file.
I also noticed that deleting OST objects logs into the debug log with
D_HA status, which is enabled by default. Move this over to D_INODE
so it doesn't fill the OST debug logs.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095
Reviewed-on: http://review.whamcloud.com/7918 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emoly Liu [Thu, 28 Apr 2016 16:07:37 +0000 (12:07 -0400)]
staging: lustre: debugfs: improve osc/mdc "imports" connect data
Improve /sys/debug/fs/lustre/{osc,mdc}/*/import files to print
the struct obd_connect_data data fields as "connect_data:"
in addition to the "connect_flags:" field.
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3386
Reviewed-on: http://review.whamcloud.com/6588 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emoly Liu [Thu, 28 Apr 2016 16:07:36 +0000 (12:07 -0400)]
staging: lustre: obd: add case LCFG_PARAM to osd_process_config
Some proc parameters were moved from ofd to osd module and only
their symlinks were kept in ofd for interoperability/compatibility.
To process this kind of config params passed by ofd, this patch is
to do the following fixes:
- since these parameters are not included by the static lprocfs var
list, a pre-check is added for them to avoid "unknown param" error
message confuses the uses. If they are matched in this check, they
will be passed to the osd directly.
- improve the error messages in class_process_proc_param() and
class_process_proc_seq_param() a little.
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4221
Reviewed-on: http://review.whamcloud.com/8238 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 28 Apr 2016 16:07:34 +0000 (12:07 -0400)]
staging: lustre: fld: add local fldb to each target
Add local FLDB to each MDT, so OSD/OUT can check whether
FID is remote by looking up local FLDB, i.e. no need send RPC
to MDT0. This is just the client part of the work.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4076
Reviewed-on: http://review.whamcloud.com/7884 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Thu, 28 Apr 2016 01:37:17 +0000 (21:37 -0400)]
staging: lustre: llite: debugging for ll_file_open LASSERT
Add debugging for LASSERTF(it_disposition(it, DISP_ENQ_OPEN_REF)
in ll_file_open(), since this is a rarely hit failure under racer,
and it would be useful to get more information if this is hit
again. Print the full intent disposition, as well as the status,
in case Oleg's earlier comment about bailing out on any error is
actually the case here.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1993
Reviewed-on: http://review.whamcloud.com/6250 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Thu, 28 Apr 2016 01:37:15 +0000 (21:37 -0400)]
staging: lustre: fid: add a connect flag for open by FID
Add OBD_CONNECT_OPEN_BY_FID for open by FID, if MDS supports this,
for open by FID, it won't retry with name if object with the FID
doesn't exist; while if client supports this, client won't pack
name in open request if FID is known.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544
Reviewed-on: http://review.whamcloud.com/8093 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: obd: cleanup client import if client_obd_setup fails
client_obd_setup() allocates an obd_import which should be cleaned up
if there is any failure afterwards in callers of client_obd_setup().
This patch fixes the bug in osc_setup(), mgc_setup(), mdc_setup() and
lwp_setup(). The fix is to call obd_cleanup_client_import() before
calling client_obd_cleanup() in case of an error.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3810
Reviewed-on: http://review.whamcloud.com/7561 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Thu, 28 Apr 2016 01:37:11 +0000 (21:37 -0400)]
staging: lustre: obd: add newline for dumped config record
The function class_config_parse_rec() parses the llog record
and places it into a buffer to be returned. That buffer needs
to end with a newline which is currently missing.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2149
Reviewed-on: http://review.whamcloud.com/4254 Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Wed, 27 Apr 2016 22:21:07 +0000 (18:21 -0400)]
staging: lustre: ptlrpc: quiet warning for 2.1/2.5 connections
The Lustre 2.5.4 client will print a warning about connections with
2.1.3 servers, yet they are still supposed to be interoperable.
Increase the window of warning to be up to Lustre 2.5.50, since we
do not intend to allow interoperability between 2.1 and 2.6 systems.
This was from the time when major releases like Lustre 1.4 and 1.8
were many years apart would have no chance for interoperation.
Only print this message once per client, to avoid flooding the console
for connections to many servers or frequent network reconnections.
Server versions should all be nearly the same in any case.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2528
Reviewed-on: http://review.whamcloud.com/7916 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Jian Yu <jian.yu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: osc: Use SOFT_SYNC to urge server commit
This change adds a BRW page flag, OBD_BRW_SOFT_SYNC. This flag is
intended to urge a server to commit a client's unstable pages to
stable storage. A client will add this flag to any BRW requests while
it is in a state where it has "many" unstable pages pinned in its cache.
The server, upon receiving a page with this flag set, *should* begin
an async commit. The idea being that, with the proactive async commit,
the client's pinned unstable pages will transition into a stable state
faster than they would have otherwise. Although, the server side portion
of this agreement is still unimplemented, so the OBD_BRW_SOFT_SYNC flag
will currently fall on deaf ears.
staging: lustre: osc: Track number of "unstable" pages per osc
This change adds simple accounting hooks for "unstable" pages on a per
OSC basis. Now, in addition to the per filesystem tracking, each OSC
will maintain a running total of its unstable pages. These counters are
exported through the proc interface, and can be read using the lctl
command.
For example:
# Read number of unstable pages contained by each OSC
lctl get_param osc.*.unstable_stats
The motivation for this change is in anticipation of implementing a
"soft sync" functionality, urging servers to commit these unstable
pages to stable storage. The per OSC accounting allows a client to
limit the soft sync request to only the OSCs which have outstanding
unstable pages.
staging: lustre: osc: Track and limit "unstable" pages
This change adds a global counter to track the number of "unstable"
pages held by a given client, along with per file system counters. An
"unstable" page is defined as a page which has been sent to the server
as part of a bulk request, but is uncommitted to stable storage.
In addition to simply tracking the unstable pages, they now also count
towards the maximum number of "pinned" pages on the system at any given
time. Thus, a client will now be bound on the number of dirty and
unstable pages it can pin in memory. Previously only dirty pages were
accounted for in this limit.
In addition to tracking the number of unstable pages in Lustre, the
NR_UNSTABLE_NFS memory zone is also incremented and decremented for
easy monitoring using the "NFS_Unstable:" field in /proc/meminfo.
This field is also used internally by the kernel to limit the total
amount of unstable pages on the system.
The motivation for this change is twofold. First, the client must not
allow itself to disconnect from an OST while still holding unstable
pages. Otherwise, these unstable pages can get lost due to an OST
failure, and replay is not possible due to the disconnect via unmount.
Secondly, the client needs a mechanism to prevent it from allocating too
much of its available RAM to unreclaimable pages pinned by the ptlrpc
layer. If this case occurs, out of memory events can trigger as a side
effect, which we need to avoid.
The current number of unstable pages accounted for on a per file system
granularity is exported by the unstable_stats proc file, contained under
each file system's llite namespace. An example of retrieving this
information is below:
Fix 'error handling' issues found by Coverity version 6.6.1:
Unchecked return value (CHECKED_RETURN)
Calling function without checking return value.
Argument cannot be negative (NEGATIVE_RETURNS)
Negative value used as argument to a function expecting a
positive value.
James Nunez [Wed, 27 Apr 2016 22:21:01 +0000 (18:21 -0400)]
staging: lustre: llite: Replace printing of i_ino with ll_inode2fid()
The printing of i_ino/i_generation in llite messages is not nearly so
useful as printing the full inode FID, since i_ino is a "compressed"
version of the FID and there may be duplicate values for i_ino in some
cases (especially if running on a 32-bit client).
All instances of printing i_ino/i_generation are replaced with
the FID using ll_inode2fid(). All instances, except for one, of
printing just i_ino was replaced by printing the FID. In all
CERROR lines touched by the i_ino replacements, the device name
or fsname was added at the beginning of the message if it did not
already exist.
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3491
Reviewed-on: http://review.whamcloud.com/6848 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wireshark output moved to userland file "lustre_dlm_flags_wshark.c"
and only bits that can actually appear "on the wire" are emitted.
The user land "packet-lustre.c" code that references these bits
now gets emitted into that file. e.g. the "local_only" bit is
never put on the wire, so references to it in wireshark are gone.
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruce Korb [Wed, 27 Apr 2016 22:20:58 +0000 (18:20 -0400)]
staging: lustre: ldlm: clean up l_flags
Remove the now obsolete LDLM_AST_FLAGS and LDLM_INHERIT_FLAGS defines.
Remove the obsolete LDLM_FL_HIDE_LOCK_MASK define.
Rename "local_only" mask to "off_wire" since it is confusingly similar
to a flag that (I think) means, "do not copy this lock over the wire."
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruce Korb [Wed, 27 Apr 2016 22:20:57 +0000 (18:20 -0400)]
staging: lustre: ldlm: use accessor macros for l_flags
Convert most of the ldlm lock's l_flags references from direct
bit twiddling to using bit specific macros. A few multi-bit
operations are left as an exercise for the reader.
The changes are mostly in ldlm, but also in llite, osc and quota.
Also add a multi-bit (mask) test.
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: lmv: kernel crash due to misconfigured MDT
There are few places with access to lmv->tgts[] without check for NULL.
Usually it may happens when MDT configured starting from index 1
instead of 0. For example:
mkfs.lustre --reformat --mgs --mdt --index=1 /dev/sdd1
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4098
Reviewed-on: http://review.whamcloud.com/7941 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Di [Wed, 27 Apr 2016 22:20:55 +0000 (18:20 -0400)]
staging: lustre: obdclass: add LCT_SERVER_SESSION for server session
Add LCT_SERVER_SESSION for server session, and separate the
server session flag from LCT_SESSION, so to avoid allocating
session info for client stack for each server request, if
client and server are on the same node.
Signed-off-by: Wang Di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3806
Reviewed-on: http://review.whamcloud.com/7412 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: llite: reset writeback index in ll_writepages
Otherwise after one round the writeback index will become beyond
the file size and ->writepages() turns into an empty operation.
Also, a safety guard is added to limit the wait time for grant to
10 minutes(take recovery into consideration) at maximum in the
osc_enter_cache() function. Otherwise, EDQUOT will be returned to
the applications to start sync write.
staging: lustre: lov: Don't wait for active target with OBD_STATFS_NODELAY
Patch for LU-631 which was landed before the upstream merge broke
OBD_STATFS_NODELAY behaviour. It adds unnecessary delay while
running df command with inactive OSTs. We shouldn't try to recover
connection to OST in this case.
projects / linux-beck.git / log