Rui Miguel Silva [Tue, 20 Jan 2015 16:38:44 +0000 (16:38 +0000)]
greybus: es1: release urb on error path
if error is return when submiting the urb, we need to make sure to release the
urb from the pool, or from the dinamicly allocated. As in it, factor out the free
code and create the free_urb function.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Perry Hung [Wed, 14 Jan 2015 21:19:26 +0000 (16:19 -0500)]
greybus: gb_operation: replace timeout workqueue
If an operation is issued and the response never comes back,
gb_operation_timeout() cancels the operation but never wakes up the
waiter in gb_operation_request_send().
This patch removes the timeout workqueue and changes the request wait to
wait_for_completion_interruptible_timeout(), with timeout set to
OPERATION_TIMEOUT_DEFAULT.
Signed-off-by: Perry Hung <perry@leaflabs.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: Move the es1_ap_desc.c file to Documentation directory
This .c file isn't needed by the kernel driver, it's there for firmware
developers only, so just move it into the Documentation directory to
reduce confusion.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
Alexandre Bailon [Wed, 14 Jan 2015 09:23:49 +0000 (10:23 +0100)]
greybus: i2c-gb: fix bad message size in gb_i2c
The data_in_size variable was set to 1 for the status byte.
But now, the status byte has move to header. Then, the status byte
is "allocated" twice and cause bad message size error.
greybus: sysfs: put a \n at the end of all sysfs files
Right now some sysfs attributes have \n and some do not, so fix that and
put \n at the end of all of them to make it easier to parse things
properly in userspace.
We want to be able to "blame" a protocol for things at times, so give
them a name we can refer to them by. Announce when they are added or
removed from the system so we have a chance to know what is going on
in the kernel logs.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: module: get rid of global list of modules
Use the list that the driver core keeps of our structure, no need to
duplicate it with a local list as well. This gets rid of a static lock
too, always a nice thing to do.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
This bundles together the existing GP Bridged PHY protocols that were
part of the Greybus core: USB, UART, SDIO, PWM, and GPIO. This is now a
stand-alone kernel module. More logic will be moving here in the future
to handle bridged devices.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: vibrator-gb: move vibrator protocol to a stand-alone module.
We can't use the gb_protocol_driver() macro here as we need to do some
init and exit logic when loading and removing, so "open code" the module
init and exit functions.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: protocol: add a module owner to a protocol
Now that protocols can be in a module, we need to reference count them
to lock them into memory so they can't be removed while in use. So add
a module owner structure, and have it automatically be assigned when
registering the protocol.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: i2c-gb: split out into a stand-alone kernel module.
This splits the i2c-gb protocol into a stand-alone kernel module.
It's not going to stay in this fashion for long, this was done to test
the "can a protcol be loaded later" logic. Future refactoring is going
to move the gpbridge protocols to a separate kernel module, where this
protocol is going to live.
But for now, split it out, it is good to test with, and shows a bug in
gbsim at the moment.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: protocol: split binding of prototcols to connections out of init
When adding a new protocol to the system, walk all bundles and try to
hook up any connections that do not have a protocol already. This sets
the stage to allow for protocols to be loaded at any time, not just
before the device is seen in the system.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: protocol: switch gb_protocol_register() to return an int
We will want to return this value as a return value for module_init()
and bool does not play well with module_init(). So make it a "real"
error value and return int and fix up all callers of the function.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: interface: remove global manifest_descs list
The list was global and had no locking. It's not like we were ever
parsing more than one manifest at the same time right now, but we might
in the future. And we really want this to be local to the interface
itself, for future work redoing how to bind protocols to bundles, so
move the list to the interface structure.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Modules in the greybus system sit above the interface, so insert them
early in the sysfs tree. We dynamically create them when we have an
interface that references a module, as we don't get a "module create"
message directly. They also dynamically go away when the last interface
associated with a module is removed.
Naming scheme for modules/interfaces/bundles/connections is bumped up by
one ':', and now looks like the following:
We still have some "confusion" about interface ids and module ids, which
will be cleaned up later when the svc control protocol changes die down,
right now we just name a module after the interface as we don't have any
modules that have multiple interfaces in our systems.
This is really a list of interfaces, not modules, so rename it so that
we don't get confused when we really do add modules to the whole system
later on.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
It's a lot of renaming, some structures got renamed and also some
fields, but the goal was to rename things to make sense with the new
naming of how the system is put together in the 'driver model' view.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: es1-ap-usb: don't protest when getting -EPROTO USB errors
-EPROTO happens when devices are starting to go away in a system, or
there is something wrong on the USB connection. Either way, it's safe
to resubmit the urb for this error, don't complain to userspace about
this, as the user will see this for every device removed, which looks
scary, but means nothing.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: bundle: rename interface.[c|h] to bundle.[c|h]
We are renameing the "interface" term to "bundle" so rename the files
before we start changing structure names to make it easier for people to
see what really is happening in the changes.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Reviewed-by: Alex Elder <elder@linaro.org>
greybus: driver matching: Greybus drivers bind to interface blocks, not modules
Because of this, rename greybus_module_id to greybus_interface_block_id.
We still need to add a way for a "class" driver to be bound to an
interface, but for now, all we really need is the vendor/product pair as
the GP Bridge interface block is going to be our main user.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: interface_block: move sysfs files into the interface_block.c file
No need to keep these out in sysfs.c, move them into the
interface_block.c file so that we can see them easier, and remove some
variable definitions by taking advantage of the attribute group macro.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: interface_block: rename the sysfs files to not have 'module' in them
The sysfs files for an interface block should not have 'module' in them.
This was a hold-over from when we thought we were going to have
all attributes of a "module" in one directory. Remove the prefix as
it's not needed, and is confusing considering modules can not have
strings or any of these attributes.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Rename struct gb_module to struct gb_interface_block
It's a complex rename, some functions got their name changed where
needed, but primarily this change is focused on the structure and where
it is used. Future changes will clean up the remaining usages of the
term "module" in individual changes, this one spanned the whole
subsystem so do it all at once.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: interface_block: rename module.[c|h] to interface_block.[c|h]
"modules" in the driver model here, are really "interface blocks" as
that is what they are physically tied to. So rename the files before we
start changing the code to make it obvious what is going on.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
We removed the module version from the spec, so remove them from the
code as well. It's still in the manifest as we need to sync with gbsim
/ firmware when we do that, which will happen sometime in the next
weeks.
Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Thu, 11 Dec 2014 22:48:38 +0000 (16:48 -0600)]
greybus: switch cport id used for sends
In talking with Perry today I learned that the CPort id expected to
supplied over the HSIC interface to the APB is different from the
way I understood it.
My understanding was that the CPort id to supply always specified
the CPort id on the other end of a connection. However, Perry says
the mapping between local CPort id and remote CPort id (and device
id) is done by the host UniPro interface.
So whether sending or receiving data, the CPort id that the Greybus
code should supply to the AP Bridge is the one representing the AP
side of a connection.
This patch fixes this. The receive side already used that CPort id;
it's only the sending code that needed to be changed.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 10 Dec 2014 20:50:48 +0000 (14:50 -0600)]
greybus: ENODEV can be an expected error too
When probing for i2c devices, a read transfer operation can be used.
In this case, it is expected that some devices will not be found, so
ENODEV is an expected failure. Don't issue a warning if the return
value is -ENODEV.
Note: I anticipate we might have to be more precise in identifying
this specific case, but for now this eliminates a bogus warning when
probing i2c devices.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 10 Dec 2014 14:43:33 +0000 (08:43 -0600)]
greybus: define GB_OP_NONEXISTENT
The i2c protocol needs a way to indicate an i2c device doesn't exist
(which is not necessarily an error). Define GB_OP_NONEXISTENT to
indicate this, and updating the status<->errno mapping functions
accordingly.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 18:27:46 +0000 (12:27 -0600)]
greybus: record type in operation structure
I've gone back and forth on this, but now that I'm looking at
asynchronous operations I know that the asynchronous callback will
want to know what type of operation it is handling, and right now
that's only available in the message header.
So record an operation's type in the operation structure, and use
it in a few spots where the header type was being used previously.
Pass the type to gb_operation_create_incoming() so it can fill
it in after the operation has been created.
Clean up the crap comments above the definition of the operation
structure.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 18:27:45 +0000 (12:27 -0600)]
greybus: use null pointer for empty payload
Currently message->payload always points to the address immediately
following the header in a message. If the payload length is 0, this
is not a valid pointer.
Change the code to assign a null pointer to the payload in this
case. I have verified that no code dereferences the payload pointer
unless the payload is known to have non-zero size.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 18:27:44 +0000 (12:27 -0600)]
greybus: only record message payload size
An asynchronous operation will want to know how big the response
message it receives is. Rather than require the sender to record
that information, expose a new field "payload_size" available to
the protocol code for this purpose.
An operation message consists of a header and a payload. The size
of the message can be derived from the size of the payload, so
record only the payload size and not the size of the whole message.
Reorder the fields in a message structure.
Update the description of the message header structure.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 18:27:43 +0000 (12:27 -0600)]
greybus: don't let i2c code assume non-null payload pointer
This is in preparation for an upcoming patch, which makes the
payload pointer be NULL when a message has zero bytes of payload.
It ensures a null payload pointer never gets dereferenced. To do
this we pass the response structure to gb_i2c_transfer_response()
rather than just its data, and if it's null, returning immediately.
Rearrange the logic in gb_i2c_transfer_operation() a bit.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 18:27:42 +0000 (12:27 -0600)]
greybus: set up connection->private properly
The connection->private pointer should refer to a protocol-specific
data structure. Change two protocol drivers (USB and vibrator) so
they now set this.
In addition, because the setup routine may need access to the
data structure, the private pointer should be set early--as
early as possible. Make the UART, i2c, and GPIO protocol drivers
set the private pointer earlier.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Define a new function used to initiate a synchronous operation.
It sends the operation request message and doesn't return until
the response has been received and/or the operation's result
has been set.
This gets rid of the convention that a null callback pointer
signifies a synchronous operation.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 14:35:08 +0000 (08:35 -0600)]
greybus: make op_cycle atomic (again)
There's no need to protect updating a connections operation id cycle
counter with the operations spinlock. That spinlock protects
connection lists, which do not interact with the cycle counter.
All that we require is that it gets updated atomically, and we
can express that requirement in its type.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Wed, 3 Dec 2014 14:35:07 +0000 (08:35 -0600)]
greybus: get rid of pending operations list
A connection has two lists of operations, and an operation is always
on one or the other of them. One of them contains the operations
that are currently "in flight".
We really don't expect to have very many in-flight operations on any
given connection (in fact, at the moment it's always exactly one).
So there's no significant performance benefit to keeping these in a
separate list. An in-flight operation can also be distinguished by
its errno field holding -EINPROGRESS.
Get rid of the pending list, and search all operations rather than
the pending list when looking up a response message's operation.
Rename gb_pending_operation_find() accordingly.
There's no longer any need to remove operations from the pending
list, and the insertion function no longer has anything to do with a
pending list. Just open code what was the insertion function (it
now has only to do with assigning the operation id).
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 23:25:11 +0000 (17:25 -0600)]
greybus: define the invalid operation type symbolically
Use a symbolic constant (rather than just "0") to represent an
explicitly invalid operation type. The protocols have all reserved
that value for that purpose--this just makes it explicit in the core
code (since we now leverage its existence). Fix the code so it uses
the new symbolic value.
Define it in "operation.h" for all to see. Move the common
definition of the GB_OPERATION_TYPE_RESPONSE flag mask there
as well.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:39 +0000 (08:30 -0600)]
greybus: send operation response messages
Define a helper function gb_operation_response_alloc() and use it
to allocate the response buffer for outgoing operations in
gb_operation_create_common(.
Use it also in gb_operation_response_send() if the caller has not
allocated a response buffer.
Once a response buffer is allocated, fill in its result code and
send it.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:38 +0000 (08:30 -0600)]
greybus: introduce gb_operation_errno_map()
Define gb_operation_errno_map(), which maps an operation->errno
into the u8 value that represents it in the status field of an
operation response header. It'll be used in an upcoming patch.
Make gb_operation_status_map() a private function. It's not used
outside "operation.c" and I don't believe it ever should be.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:37 +0000 (08:30 -0600)]
greybus: activate incoming request handling
Un-comment gb_operation_request_handle(), which was recently
disabled to avoid distraction.
In gb_connection_recv_request(), activate handling incoming
requests by defining gb_operation_request_handle() as an
incoming operation's callback function.
Incoming operation requests have
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:36 +0000 (08:30 -0600)]
greybus: set result in gb_operation_response_send()
Change gb_operation_response_send() so it takes an errno to assign
as an operation's result. This emphasizes that setting the result
should be the last thing done to an incoming operation before
sending its response.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:35 +0000 (08:30 -0600)]
greybus: create a slab cache for simple messages
A large number of request and response message types have no payload.
Such "simple" messages have a known, fixed maximum size, so we can
preallocate and use a pool (slab cache) of them.
Here are two benefits to doing this:
- There can be (small) performance and memory utilization
benefits to using a slab cache.
- Error responses can be sent with no payload; the cache is
likely to have a free entry to use for an error response even
in a low memory situation.
The plan here is that an incoming request handler that has no
response payload to fill will not need to allocate a response
message. If no message has been allocated when a response is to be
sent, one will be allocated from the cache by the core code.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:33 +0000 (08:30 -0600)]
greybus: introduce gb_operation_message_init()
Separate the allocation of a message structure from its basic
initialization. This will allow very common fixed-size operation
response buffers to be allocated from a slab cache.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:32 +0000 (08:30 -0600)]
greybus: use operation type 0 to signal incoming data
When incoming data is going to be handled as a request, we create a
new operation whose request buffer will hold the received data.
There is no need to initialize the message header in such a request
buffer because it will be immediately overwritten.
Use operation type value of 0x00 in gb_operation_create_common()
to signal that we are creating an incoming operation, and therefore
do not need to initialize the request message header. This allows
us to get rid of the Boolean "outgoing" parameter.
As a result, we can stop supplying the "type" parameter to both
gb_operation_create_incoming() and gb_connection_recv_request().
Update the header comments for gb_operation_message_alloc() and
gb_operation_create_common().
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:29 +0000 (08:30 -0600)]
greybus: short message is OK for errors
We enforce a rule that a response message must completely fill the
buffer that's been allocated to hold it. However, if an error
occurs, the payload is off limits, so we should allow a short
message to convey an error result.
Change gb_connection_recv_response() to require the right message
size only if there's no error.
One other thing: The arriving data is only being copied into the
response buffer if the request was successful. That means the
response message header is assumed to have been initialized. That
isn't a valid assumption. So change it so that if an error is
seen, the header portion of the message is copied into the
response buffer--but only the header.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 2 Dec 2014 14:30:28 +0000 (08:30 -0600)]
greybus: move copy of incoming request data
Currently incoming request data is copied into a request message
buffer in gb_connection_recv_request(). Move that--along with the
assignment of the message id--into gb_operation_create_incoming().
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:11 +0000 (07:53 -0600)]
greybus: always drop reference in gb_operation_work()
Currently we issue a warning in gb_operation_work() if an operation
has no callback function defined. But we return without dropping
the reference to the operation as we should.
Stop warning if there's no callback, call it only if it's defined,
and always drop the operation reference before returning.
This means we're now treating a NULL callback pointer as a normal
condition.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:10 +0000 (07:53 -0600)]
greybus: drop gfp_mask from gb_message_send()
We will only send messages from process context. Drop the gfp_mask
parameter from gb_message_send(), and just supply GFP_KERNEL to the
host driver's buffer_send method.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:09 +0000 (07:53 -0600)]
greybus: renumber operation result values
Define a new operation status GB_OP_MALFUNCTION, which will be used
to represent that something unexpected happened while handling an
operation. This is intended as an indication similar to a BUG()
call--whatever went wrong should *never* happen and because it's
unexpected we need to treat it as a fatal error.
Define another new operation status GB_OP_UNKNOWN_ERROR, which
will represent the case where an operation ended in error, but
the error was not recognized to be properly represented by one
of the other status values.
Renumber the operation status values, defining those that are
produced by core operations code ahead of those that are more
likely to come from operation handlers. Represent the values in
hexadecimal to emphasize that they must be represented with 8 bits.
The Use 0xff for GB_OP_MALFUNCTION instead of GB_OP_TIMEOUT; the
latter is special, but a malfunction is in a class by itself.
Reorder the cases in gb_operation_status_map() to match their
numeric order.
Map GB_OP_UNKNOWN_ERROR to -EIO in gb_operation_status_map(). Map
GB_OP_MALFUNCTION to -EILSEQ in gb_operation_status_map(), since
that value is used to represent an implementation error.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:08 +0000 (07:53 -0600)]
greybus: define -EILSEQ to mean implementation error
Reserve operation result code -EILSEQ to represent that the code
that implements an operation is broken. This is used (initially)
for any attempt to set the result to -EBADR (which is reserved for
an operation in initial state), or for an attempt to set the result
of an operation that is *not* in initial state to -EINPROGRESS.
Note that we still use -EIO gb_operation_status_map() to represent a
gb_operation_result value that isn't recognized.
In gb_operation_result(), warn if operation->errno is -EBADR. That
is another value that indicates the operation is not in a state
where it's valid to query an operation's result.
Update a bunch of comments above gb_operation_result_set() to
explain constraints on operation->errno.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:07 +0000 (07:53 -0600)]
greybus: enforce max representable message size
We represent the size of a message using a 16-bit field. It's
possible for a host driver to advertise a maximum message size
that's bigger than that. If that happens, reduce the host device's
maximum buffer size to the maximum we can represent the first time
a message is allocated.
This information is actually only used by the Greybus code, but
because we're modifying a value that's "owned" by the host driver,
issue a warning when this limit is being imposed
Ensure (at build time) that our own definition is sane as well.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Mon, 1 Dec 2014 13:53:06 +0000 (07:53 -0600)]
greybus: use outgoing flag when creating operation
In gb_operation_create_common(), a zero response size is still
being used to determine whether to use GFP_KERNEL or GFP_ATOMIC
when allocating a message. Use the value of the "outgoing"
parameter to decide this instead.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
greybus: usb-gb: import a "buildable" version of the usb-gb.c driver
Based on Fabien's original driver, this version is converted (mostly) to
the new greybus operation apis. Lots of things still to do, not the
least being hooking up proper responses...
Alex Elder [Tue, 25 Nov 2014 22:54:04 +0000 (16:54 -0600)]
greybus: protect cookie with a mutex
When a Greybus message is sent, the host driver supplies a cookie
for Greybus to use to identify the sent message in the event it
needs to be canceled. The cookie will be non-null while the message
is in flight, and a null pointer otherwise.
There are two problems with this, which arise out of the fact that a
message can be canceled at any time--even concurrent with it getting
sent (such as when Greybus is getting shut down).
First, the host driver's buffer_send method can return an error
value, which is non-null but not a valid cookie. So we need to
ensure such a bogus cookie is never used to cancel a message.
Second, we can't resolve that problem by assigning message->cookie
only after we've determined it's not an error. The instant
buffer_send() returns, the message may well be in flight and *should*
be canceled at shutdown, so we need the cookie value to reflect
that.
In order to avoid these problems, protect access to a message's
cookie value with a mutex. A spin lock can't be used because the
window that needs protecting covers code that can block. We
reset the cookie value to NULL as soon as the host driver has
notified us it has been sent (or failed to).
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 25 Nov 2014 22:54:03 +0000 (16:54 -0600)]
greybus: ignore a null cookie when canceling buffer
It's possible for an in-flight buffer to be recorded as sent *after*
a thread has begin the process of canceling it. In that case the
Greybus message cookie will be set to NULL, and that value can end
up getting passed to buffer_cancel(). Change buffer_cancel() so
it properly handles (ignores) a null cookie pointer.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 25 Nov 2014 22:54:02 +0000 (16:54 -0600)]
greybus: update operation result atomically
An operation result can be set both in and out of interrupt context.
For example, a response message could be arriving at the same time a
timeout of the operation is getting processed. We therefore need to
ensure the result is accessed atomically.
Protect updates to the errno field using the operations spinlock.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 25 Nov 2014 19:06:45 +0000 (13:06 -0600)]
greybus: enforce receive buffer size
When an operation is created its receive buffer size is specified.
In all current cases, the size supplied for the receive buffer is
exactly the size that should be returned. In other words, if
any fewer than that many bytes arrived in a response, it would be
an error.
So tighten the check on the number of bytes arriving for a response
message, ensuring that the number of bytes received is *exactly the
same* as the number of bytes available (rather than just less than).
We'll expand our interpretation of of -EMSGSIZE to mean "wrong
message size" rather than just "message too long."
If we someday encounter an actual case where we want to be able to
successfully receive something less than the full receive buffer we
can adjust the code to handle that (and give it a way to tell the
receiver how many bytes are present).
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Alex Elder [Tue, 25 Nov 2014 19:06:44 +0000 (13:06 -0600)]
greybus: fix some error codes
Change the message result values used in two cases.
First, use -EMSGSIZE rather than -E2BIG to represent a message
that is larger than the buffer intended to hold it. That is
the proper code for this situation.
Second, use -ECANCELED rather than -EINTR for an operation that
has been canceled. The definition of that error is literally
"Operation Canceled" so it seems like the right thing to do.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>