Paul Bolle [Tue, 19 Mar 2013 05:58:47 +0000 (05:58 +0000)]
sparc: remove unused "config BITS"
sparc's asm/module.h got removed in commit 786d35d45cc40b2a51a18f73e14e135d47fdced7 ("Make most arch asm/module.h
files use asm-generic/module.h"). That removed the only two uses of this
Kconfig symbol. So we can remove its entry too.
> >From arch/sparc/Makefile:
> ifeq ($(CONFIG_SPARC32),y)
> [...]
>
> [...]
> export BITS := 32
> [...]
>
> else
> [...]
>
> [...]
> export BITS := 64
> [...]
>
> So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not.
> Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That
> doesn't count as usage of "config BITS".
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Bolle [Tue, 12 Mar 2013 20:35:19 +0000 (21:35 +0100)]
sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"
Commit 2d78d4beb64eb07d50665432867971c481192ebf ("[PATCH] bitops:
sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend
on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with
that name, this always evaluates to true. Delete this dependency.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Allen Pais [Tue, 5 Mar 2013 23:47:59 +0000 (23:47 +0000)]
sparc64: correctly recognize SPARC64-X chips
The following patch adds support for correctly
recognizing SPARC-X chips.
cpu : Unknown SUN4V CPU
fpu : Unknown SUN4V FPU
pmu : Unknown SUN4V PMU
Signed-off-by: Katayama Yoshihiro <kata1@jp.fujitsu.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Hellstrom [Thu, 28 Feb 2013 04:31:55 +0000 (04:31 +0000)]
sparc,leon: fix GRPCI2 device0 PCI config space access
bus=0 slot=0 (device0) was used internally by the PCI host driver
to access the PCI host controller itself, however that had the
effect that PCI device0 was never accessible, which is wrong
when the motherboard has connected PCI AD16 signal to a slot.
A special case for accessing the PCI host controller itself is
added with this patch, by setting bus to TGT.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 1 Mar 2013 04:45:52 +0000 (20:45 -0800)]
Merge tag 'lzo-update-signature-20130226' of git://github.com/markus-oberhumer/linux
Pull LZO compression update from Markus Oberhumer:
"Summary:
========
Update the Linux kernel LZO compression and decompression code to the
current upstream version which features significant performance
improvements on modern machines.
Some *synthetic* benchmarks:
============================
LZO-2005 : LZO version in current 3.8 kernel (which is based on
the LZO 2.02 release from 2005)
LZO-2012 : updated LZO version available in linux-next
**LZO-2013-UA : updated LZO version available in linux-next plus experimental
ARM Unaligned Access patch. This needs approval
from some ARM maintainer ist NOT YET INCLUDED."
Andrew Morton <akpm@linux-foundation.org> acks it and says:
"There's a new LZ4 on the block which is even faster than the sped-up
LZO, but various filesystems and things use LZO"
* tag 'lzo-update-signature-20130226' of git://github.com/markus-oberhumer/linux:
crypto: testmgr - update LZO compression test vectors
lib/lzo: Update LZO compression to current upstream version
lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c
Linus Torvalds [Fri, 1 Mar 2013 04:42:33 +0000 (20:42 -0800)]
Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
"For:
- Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
- error injection support for i5100, when EDAC debug is enabled;
- fix edac when it is loaded builtin (early init for the subsystem);
- a "Firmware First" EDAC driver, allowing ghes to report errors via
EDAC (ghes-edac).
With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
i7core_edac or sb_edac are running, the error reports are
unpredictable, as both BIOS and OS race to access the registers. With
ghes-edac, the EDAC core will refuse to register any other concurrent
memory error driver.
This patchset moves the ghes struct definitions to a separate header
file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
register/unregister and to report errors via ghes-edac. Those changes
were acked by ghes driver maintainer (Huang)."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
i5100_edac: convert to use simple_open()
ghes_edac: fix to use list_for_each_entry_safe() when delete list items
ghes_edac: Fix RAS tracing
ghes_edac: Make it compliant with UEFI spec 2.3.1
ghes_edac: Improve driver's printk messages
ghes_edac: Don't credit the same memory dimm twice
ghes_edac: do a better job of filling EDAC DIMM info
ghes_edac: add support for reporting errors via EDAC
ghes_edac: Register at EDAC core the BIOS report
ghes: add the needed hooks for EDAC error report
ghes: move structures/enum to a header file
edac: add support for error type "Info"
edac: add support for raw error reports
edac: reduce stack pressure by using a pre-allocated buffer
edac: lock module owner to avoid error report conflicts
edac: remove proc_name from mci structure
edac: add a new memory layer type
edac: initialize the core earlier
edac: better report error conditions in debug mode
i5100_edac: Remove two checkpatch warnings
...
Linus Torvalds [Fri, 1 Mar 2013 04:23:09 +0000 (20:23 -0800)]
Fix mis-merge of intel_powerclamp.c resulting in compile error
The new intel_powerclamp thermal cooling device driver was merged in
commit 2af78448fff6 (Pull thermal management updates from Zhang Rui)
without any data conflicts. But there was a more subtle conflict I
missed: the driver uses MAX_USER_RT_PRIO, but commit 8bd75c77b7c6
("sched/rt: Move rt specific bits into new header file") had moved that
define from <linux/sched.h> to <linux/sched/rt.h>.
Which caused this build failure:
drivers/thermal/intel_powerclamp.c: In function ‘clamp_thread’:
drivers/thermal/intel_powerclamp.c:360:21: error: ‘MAX_USER_RT_PRIO’ undeclared (first use in this function)
drivers/thermal/intel_powerclamp.c:360:21: note: each undeclared identifier is reported only once for each function it appears in
And because I don't do a full "make allmodconfig" build after each pull,
I didn't notice until too late. So now the fix is here, separately from
the merge commit.
Linus Torvalds [Fri, 1 Mar 2013 04:09:24 +0000 (20:09 -0800)]
Merge tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC mvebu platform changes from Olof Johansson:
"This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.
Notable changes are:
- More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers
here, ethernet and PCI still remain.
- SMP support for mvebu is improved with support for the local
interrupt controller.
- The Guruplug board file gets replaced with a DT description.
Unfortunately, the dependency on the MMC tree turned out to be a much
larger problem than expected, when the MMC maintainer rebased the
patches in his tree that all of the patches in this branch are based
on, which caused merge conflicts between the new and old versions of
those patches.
To work around the merge conflicts, this branch rebases all patches on
top of the respective MMC patches that did get merged into 3.9. The
patches are all identical to the versions that were part of
linux-next, but have a new commit date."
* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: add button for OpenBlocks AX3-4
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 to DT based regulators.
...
Linus Torvalds [Fri, 1 Mar 2013 04:00:40 +0000 (20:00 -0800)]
Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late OMAP changes from Olof Johansson:
"This branch contains changes for OMAP that came in late during the
release staging, close to when the merge window opened.
It contains, among other things:
- OMAP PM fixes and some patches for audio device integration
- OMAP clock fixes related to common clock conversion
- A set of patches cleaning up WFI entry and blocking.
- A set of fixes and IP block support for PM on TI AM33xx SoCs
(Beaglebone, etc)
- A set of smaller fixes and cleanups around AM33xx restart and
revision detection, as well as removal of some dead code
(CONFIG_32K_TIMER_HZ)"
* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
ARM: omap2: include linux/errno.h in hwmod_reset
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
ARM: OMAP4: hwmod data: Enable AESS hwmod device
ARM: OMAP4: hwmod data: Update AESS data with memory bank area
ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
ASoC: TI AESS: add autogating-enable function, callable from architecture code
ARM: OMAP2+: hwmod: add enable_preprogram hook
ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
ARM: OMAP2+: AM33XX: Update the hardreset API
ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
...
Linus Torvalds [Fri, 1 Mar 2013 03:59:34 +0000 (19:59 -0800)]
Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC i.MX DT changes from Olof Johansson:
"This branch contains of devicetree changes for the Freescale i.MX
platform.
The base patch of the branch changes the format of the dts files to a
slightly different format that makes it easier to do derivative board
definitions, but it also introduces a lot of churn in the process
since every line of the file is touched.
On top of that are a handful of the regular changes; enabling more
boards as DT-based instead of legacy board files (mx25pdk), enabling
another driver for devicetree and thus adding bindings (onewire), etc.
I'm not happy about the churn, and will likely not take it for other
platforms in the future."
* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: dts: add dtsi for imx6q and imx6dl
ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
ARM: dts: i.MX6: Add regulator delay support
ARM: dts: Add device tree entry for onewire master on i.MX53
ARM: i.MX53: Add clocks for i.mx53 onewire master.
W1: Add device tree support to MXC onewire master.
ARM: imx: enable imx6q-cpufreq support
ARM: dts: Add apf51 basic support
ARM i.MX6: change mxs usbphy clock usage
ARM: dts: imx6q: Remove silicon version from SDMA firmware
ARM i.MX53: dts: add oftree for MBa53 baseboard
ARM i.MX53: add dts for the TQ tqma53 module
ARM: dts: imx53: pinctrl update
ARM i.MX51 babbage: Add keypad support
ARM: dts: imx: Add imx51 KPP entry
ARM: dts: imx25-karo-tx25: Put status entry in the end
ARM: mx25pdk: Add device tree support
ARM: dts: imx: use nodes label in board dts
ARM: dts: add missing imx dtb targets
ARM: boot: dts: Add an entry for imx27-pdk.dtb
...
Linus Torvalds [Fri, 1 Mar 2013 03:48:26 +0000 (19:48 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"Highlights:
- introduction of Dove thermal sensor driver.
- introduction of Kirkwood thermal sensor driver.
- introduction of intel_powerclamp thermal cooling device driver.
- add interrupt and DT support for rcar thermal driver.
- add thermal emulation support which allows platform thermal driver
to do software/hardware emulation for thermal issues."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
thermal: rcar: remove __devinitconst
thermal: return an error on failure to register thermal class
Thermal: rename thermal governor Kconfig option to avoid generic naming
thermal: exynos: Use the new thermal trend type for quick cooling action.
Thermal: exynos: Add support for temperature falling interrupt.
Thermal: Dove: Add Themal sensor support for Dove.
thermal: Add support for the thermal sensor on Kirkwood SoCs
thermal: rcar: add Device Tree support
thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
thermal: rcar: add interrupt support
thermal: rcar: add read/write functions for common/priv data
thermal: rcar: multi channel support
thermal: rcar: use mutex lock instead of spin lock
thermal: rcar: enable CPCTL to use hardware TSC deciding
thermal: rcar: use parenthesis on macro
Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared
Thermal: fix a wrong comment
thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation
PM: intel_powerclamp: off by one in start_power_clamp()
thermal: exynos: Miscellaneous fixes to support falling threshold interrupt
...
Linus Torvalds [Fri, 1 Mar 2013 03:43:13 +0000 (19:43 -0800)]
Merge tag 'tag-for-linus-3.9' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf
Pull dma-buf framework updates from Sumit Semwal:
"Refcounting implemented for vmap in core dma-buf"
* tag 'tag-for-linus-3.9' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf:
CHROMIUM: dma-buf: restore args on failure of dma_buf_mmap
dma-buf: implement vmap refcounting in the interface logic
Linus Torvalds [Fri, 1 Mar 2013 02:02:55 +0000 (18:02 -0800)]
Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
"Miscellaneous bugfixes, plus:
- An overhaul of the DRC cache by Jeff Layton. The main effect is
just to make it larger. This decreases the chances of intermittent
errors especially in the UDP case. But we'll need to watch for any
reports of performance regressions.
- Containerized nfsd: with some limitations, we now support
per-container nfs-service, thanks to extensive work from Stanislav
Kinsbursky over the last year."
Some notes about conflicts, since there were *two* non-data semantic
conflicts here:
- idr_remove_all() had been added by a memory leak fix, but has since
become deprecated since idr_destroy() does it for us now.
- xs_local_connect() had been added by this branch to make AF_LOCAL
connections be synchronous, but in the meantime Trond had changed the
calling convention in order to avoid a RCU dereference.
There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.
* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
SUNRPC: make AF_LOCAL connect synchronous
nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
svcrpc: fix rpc server shutdown races
svcrpc: make svc_age_temp_xprts enqueue under sv_lock
lockd: nlmclnt_reclaim(): avoid stack overflow
nfsd: enable NFSv4 state in containers
nfsd: disable usermode helper client tracker in container
nfsd: use proper net while reading "exports" file
nfsd: containerize NFSd filesystem
nfsd: fix comments on nfsd_cache_lookup
SUNRPC: move cache_detail->cache_request callback call to cache_read()
SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
SUNRPC: rework cache upcall logic
SUNRPC: introduce cache_detail->cache_request callback
NFS: simplify and clean cache library
NFS: use SUNRPC cache creation and destruction helper for DNS cache
nfsd4: free_stid can be static
nfsd: keep a checksum of the first 256 bytes of request
sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
sunrpc: fix comment in struct xdr_buf definition
...
Linus Torvalds [Fri, 1 Mar 2013 01:43:09 +0000 (17:43 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
"A few groups of patches here. Alex has been hard at work improving
the RBD code, layout groundwork for understanding the new formats and
doing layering. Most of the infrastructure is now in place for the
final bits that will come with the next window.
There are a few changes to the data layout. Jim Schutt's patch fixes
some non-ideal CRUSH behavior, and a set of patches from me updates
the client to speak a newer version of the protocol and implement an
improved hashing strategy across storage nodes (when the server side
supports it too).
A pair of patches from Sam Lang fix the atomicity of open+create
operations. Several patches from Yan, Zheng fix various mds/client
issues that turned up during multi-mds torture tests.
A final set of patches expose file layouts via virtual xattrs, and
allow the policies to be set on directories via xattrs as well
(avoiding the awkward ioctl interface and providing a consistent
interface for both kernel mount and ceph-fuse users)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
libceph: add support for HASHPSPOOL pool flag
libceph: update osd request/reply encoding
libceph: calculate placement based on the internal data types
ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
ceph: update "ceph_features.h"
libceph: decode into cpu-native ceph_pg type
libceph: rename ceph_pg -> ceph_pg_v1
rbd: pass length, not op for osd completions
rbd: move rbd_osd_trivial_callback()
libceph: use a do..while loop in con_work()
libceph: use a flag to indicate a fault has occurred
libceph: separate non-locked fault handling
libceph: encapsulate connection backoff
libceph: eliminate sparse warnings
ceph: eliminate sparse warnings in fs code
rbd: eliminate sparse warnings
libceph: define connection flag helpers
rbd: normalize dout() calls
rbd: barriers are hard
rbd: ignore zero-length requests
...
Linus Torvalds [Thu, 28 Feb 2013 21:21:44 +0000 (13:21 -0800)]
Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback fixes from Wu Fengguang:
"Two writeback fixes
- fix negative (setpoint - dirty) in 32bit archs
- use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()"
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
Negative (setpoint-dirty) in bdi_position_ratio()
vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them
Linus Torvalds [Thu, 28 Feb 2013 21:16:07 +0000 (13:16 -0800)]
Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-block
Pull block driver bits from Jens Axboe:
"After the block IO core bits are in, please grab the driver updates
from below as well. It contains:
- Fix ancient regression in dac960. Nobody must be using that
anymore...
- Some good fixes from Guo Ghao for loop, fixing both potential
oopses and deadlocks.
- Improve mtip32xx for NUMA systems, by being a bit more clever in
distributing work.
- Add IBM RamSan 70/80 driver. A second round of fixes for that is
pending, that will come in through for-linus during the 3.9 cycle
as per usual.
- A few xen-blk{back,front} fixes from Konrad and Roger.
- Other minor fixes and improvements."
* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
loopdev: ignore negative offset when calculate loop device size
loopdev: remove an user triggerable oops
loopdev: move common code into loop_figure_size()
loopdev: update block device size in loop_set_status()
loopdev: fix a deadlock
xen-blkback: use balloon pages for persistent grants
xen-blkfront: drop the use of llist_for_each_entry_safe
xen/blkback: Don't trust the handle from the frontend.
xen-blkback: do not leak mode property
block: IBM RamSan 70/80 driver fixes
rsxx: add slab.h include to dma.c
drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
block: remove new __devinit/exit annotations on ramsam driver
block: IBM RamSan 70/80 device driver
drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
dac960: return success instead of -ENOTTY
mtip32xx: add trim support
mtip32xx: Add workqueue and NUMA support
block: delete super ancient PC-XT driver for 1980's hardware
Linus Torvalds [Thu, 28 Feb 2013 20:52:24 +0000 (12:52 -0800)]
Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
Linus Torvalds [Thu, 28 Feb 2013 20:43:43 +0000 (12:43 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull first round of SCSI updates from James Bottomley:
"The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a
few bug fixes"
Pull delayed because google hates James, and sneakily considers his pull
requests spam. Why, google, why?
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits)
[SCSI] aacraid: 1024 max outstanding command support for Series 7 and above
[SCSI] bnx2fc: adjust duplicate test
[SCSI] qla4xxx: Update driver version to 5.03.00-k4
[SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.
[SCSI] qla4xxx: wait for boot target login response during probe.
[SCSI] qla4xxx: Added support for force firmware dump
[SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
[SCSI] qla4xxx: Throttle active IOCBs to firmware limits
[SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
[SCSI] qla4xxx: Quiesce driver activities while loopback
[SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
[SCSI] qla4xxx: Add spurious interrupt messages under debug level 2
[SCSI] cxgb4i: Remove the scsi host device when removing device
[SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
[SCSI] qla4xxx: Update driver version to 5.03.00-k3
[SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox
[SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
[SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
[SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
[SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
...
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
The Armada 370 Reference Design board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this IP. there are no
GPIOs for card-detect and write-protect so we do not specify any.
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
ARM: dove: convert serial DT nodes to clocks property
of_serial now has support for using clocks property and we have
a DT clock provider. This patch replaces the hard coded clock-frequency
property with a clocks phandle to tclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Tue, 5 Feb 2013 20:54:55 +0000 (21:54 +0100)]
arm: mvebu: Add SPI flash on Armada 370 DB board
This patch add support for the SPI flash MX25l25635E which is present
on the Armada 370 DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 6 Feb 2013 13:06:21 +0000 (10:06 -0300)]
arm: mvebu: Add support for SPI controller in Armada 370/XP
The Armada 370 and Armada XP SoC has an SPI controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Note that the Armada XP SPI register length is 0x50 bytes,
while Armada 370 SPI register length is 0x28 bytes,
so we choose the smaller of the two.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:45 +0000 (18:32 +0100)]
clocksource: update and move armada-370-xp-timer documentation to timer directory
Timer driver for Armada 370 and Armada XP have gained local timers
support. So it needs new resources information regarding the IRQs
and the registers.
Also move the documentation in the new and more accurate directory
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:31 +0000 (12:26 -0300)]
arm: mvebu: Enable USB controllers on Armada 370/XP boards
This patch activates every USB port provided by each SoC.
Except for Armada XP Openblocks AX3-4 board,
where we enable only the first two USB ports
until we have more information on the third one usage.
Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Wed, 23 Jan 2013 15:26:30 +0000 (12:26 -0300)]
arm: mvebu: Add support for USB host controllers in Armada 370/XP
The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.
Cc: Lior Amsalem <alior@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The OpenBlocks AX3-4 board has one software-controlled button on the
front side, labeled "INIT", so we add minimal support for this button
in the kernel.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:12 +0000 (15:49 +0100)]
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
Now that the mvsdio driver has a Device Tree binding, and the SDIO
controller is declared in kirkwood.dtsi, migrate the mplcec4 board to
use the Device Tree to probe the SDIO controller and to mux the pins
of the SDIO interface correctly.
This patch has not been tested, it remains to be tested by a person
having access to the hardware.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:11 +0000 (15:49 +0100)]
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
Now that the mvsdio driver has a Device Tree binding, and the SDIO
controller is declared in kirkwood.dtsi, migrate the dreamplug board
to use the Device Tree to probe the SDIO controller and to mux this
interface properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:09 +0000 (15:49 +0100)]
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
The Globalscale Mirabox uses the SDIO interface of the Armada 370 to
connect to a Wifi/Bluetooth SD8787 chip, so we enable the SDIO
interface of this board in its Device Tree file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:08 +0000 (15:49 +0100)]
arm: mvebu: enable the SD card slot on Armada 370 DB board
The Armada XP DB evaluation board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we add a device tree
description for it.
However, in the default configuration of the board, the SD card slot
is not usable: the connector plugged into CON40 must be changed
against a different one, provided with the board by the
manufacturer. Since such a manual modification of the hardware is
needed, we did not enable the SDIO interface by default, and left it
to the board user to modify the Device Tree if needed. Since this
board is really only an evaluation board for developers and not a
final product, it is not too bad.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:07 +0000 (15:49 +0100)]
arm: mvebu: enable the SD card slot on Armada XP DB board
The Armada XP DB evaluation board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this
IP. Unfortunately, there are no GPIOs for card-detect and
write-protect.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:06 +0000 (15:49 +0100)]
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
The SDIO interface is only available on pins MPP30/31/32/33/34/35 on
the various Armada XP variants, so we provide a pin muxing option for
this in the Armada XP .dtsi files.
Even though those muxing options are the same for MV78230, MV78260 and
MV78460, we keep them in each .dtsi file, because the number of pins,
and therefore the declaration of the pinctrl node, is different for
each SoC variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:05 +0000 (15:49 +0100)]
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
The SDIO interface is available either on pins MPP9/11/12/13/14/15 or
MPP47/48/49/50/51/52 on the Armada 370. Even though all combinations
are potentially possible, those two muxing options are the most
probable ones, so we provide those at the SoC level .dtsi file.
In practice, in turns out the Armada 370 DB board uses the former,
while the Armada 370 Mirabox uses the latter.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:04 +0000 (15:49 +0100)]
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
Now that the mvsdio MMC driver has a Device Tree binding, we add the
Device Tree informations to describe the SDIO interface available in
the Armada 370/XP SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Wed, 12 Dec 2012 09:06:24 +0000 (10:06 +0100)]
arm: mvebu: Add RTC support for Armada 370 and Armada XP
The Armada 370 and Armada XP Socs have the same controller that the
one used in the orion platforms. This patch updates the device tree
for these SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <florian@openwrt.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Mon, 4 Feb 2013 17:21:07 +0000 (18:21 +0100)]
arm: mvebu: update defconfig with ATAG support when using DT
Some of the mvebu boards (mainly the development board) come with
plug-in RAM modules. This patch allows to let the bootloaders which
have no support for DTS to give the real amount of memory available on
the board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Fri, 25 Jan 2013 17:32:42 +0000 (18:32 +0100)]
clocksource: time-armada-370-xp: add local timer support
On the SOCs Armada 370 and Armada XP, each CPU comes with two private
timers. This patch use the timer 0 of each CPU as local timer for the
clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use
only the private Timer 0 of CPU 0.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arm: mvebu: add DTS file for Marvell RD-A370-A1 board
This patch adds the DTS file to support the Marvell RD-A370-A1
(Reference Design board) also known as RD-88F6710 board. It is almost
entirely similar to the DB-A370 board except that the first Ethernet PHY
is SGMII-wired and the second is a switch which is RGMII-wired.
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Wed, 5 Dec 2012 20:43:23 +0000 (21:43 +0100)]
arm: mvebu: Improve the SMP support of the interrupt controller
This patch makes the interrupt controller driver more SMP aware for
the Armada XP SoCs. It adds the support for the per-CPU irq. It also
adds the implementation for the set_affinity hook.
Patch initialy wrote by Yehuda Yitschak and reworked by Gregory
CLEMENT.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Arnd Bergmann [Thu, 28 Feb 2013 17:19:16 +0000 (18:19 +0100)]
ARM: Dove: split legacy and DT setup
In the beginning of DT for Dove it was reasonable to have it close to
non-DT code. With improved DT support, it became more and more difficult
to not break non-DT while changing DT code.
This patch splits up DT board setup and introduces a DOVE_LEGACY config
to allow to remove legacy code for DT-only kernels.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Olof Johansson [Sun, 13 Jan 2013 17:54:07 +0000 (09:54 -0800)]
ARM: dove: update dove_defconfig with a few useful options
This refreshes the dove_defconfig, and adds:
PRINTK_TIME
DEVTMPFS
EXT4
They're quite useful, and allows booting a cubox ubuntu rootfs on SD card,
since that by default uses ext4.
The rest of the churn is due to options and defaults moving around, no
functional difference.
Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to
enable LED support in mvebu_defconfig. We anticipate that more
platforms using Marvell EBU SoCs will have LEDs in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:19 +0000 (15:49 +0100)]
arm: mvebu: enable btmrvl driver in mvebu_defconfig
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless/Bluetooth chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the btmrvl driver for the Bluetooth part of
the SD8787 chip.
For now, the driver gets probed correctly, detects the device but
apparently fails to push the firmware to the device:
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!
Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
Bluetooth: FW failed to be active in time!
Bluetooth: Downloading firmware failed!
This will have to be investigated separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:18 +0000 (15:49 +0100)]
arm: mvebu: enable mwifiex driver in mvebu_defconfig
The Globalscale Mirabox platform, based on the Armada 370 from
Marvell, has a SD8787 Wireless chip connected on the SDIO
interface. Now that the mvsdio has a Device Tree binding, and the
necessary Device Tree informations have been added at the SoC and
board level, let's enable the mwifiex driver for the Wireless part of
the SD8787 chip.
For now, the driver gets probed correctly, detects a device and shows
the network interfaces. However, scanning Wifi networks doesn't work
for now, with a 'CMD_RESP: cmd 0x6 error, result=0x1' message. This
will have to be investigated separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 21 Dec 2012 14:49:17 +0000 (15:49 +0100)]
arm: mvebu: enable SDIO support in mvebu_defconfig
Now that the mvsdio driver has gained Device Tree support and the
necessary Device Tree informations has been added for Armada 370 and
Armada XP platforms, we enable the MMC subsystem and the mvsdio driver
in mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Gregory CLEMENT [Wed, 12 Dec 2012 09:06:26 +0000 (10:06 +0100)]
arm: mvebu: Update defconfig with Marvell RTC support
The RTC class driver is already part of the mvebu_defconfig but the
Marvell internal RTC not yet. Now that its support is added for mvebu
let's update the config file.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Florian Fainelli <florian@openwrt.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
J. Bruce Fields [Wed, 20 Feb 2013 22:52:19 +0000 (17:52 -0500)]
SUNRPC: make AF_LOCAL connect synchronous
It doesn't appear that anyone actually needs to connect asynchronously.
Also, using a workqueue for the connect means we lose the namespace
information from the original process. This is a problem since there's
no way to explicitly pass in a filesystem namespace for resolution of an
AF_LOCAL address.
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Peter Hurley [Wed, 27 Feb 2013 20:28:28 +0000 (15:28 -0500)]
x86/kvm: Fix pvclock vsyscall fixmap
The physical memory fixmapped for the pvclock clock_gettime vsyscall
was allocated, and thus is not a kernel symbol. __pa() is the proper
method to use in this case.
Fixes the crash below when booting a next-20130204+ smp guest on a
3.8-rc5+ KVM host.
Linus Torvalds [Thu, 28 Feb 2013 04:58:09 +0000 (20:58 -0800)]
Merge branch 'akpm' (final batch from Andrew)
Merge third patch-bumb from Andrew Morton:
"This wraps me up for -rc1.
- Lots of misc stuff and things which were deferred/missed from
patchbombings 1 & 2.
- ocfs2 things
- lib/scatterlist
- hfsplus
- fatfs
- documentation
- signals
- procfs
- lockdep
- coredump
- seqfile core
- kexec
- Tejun's large IDR tree reworkings
- ipmi
- partitions
- nbd
- random() things
- kfifo
- tools/testing/selftests updates
- Sasha's large and pointless hlist cleanup"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits)
hlist: drop the node parameter from iterators
kcmp: make it depend on CHECKPOINT_RESTORE
selftests: add a simple doc
tools/testing/selftests/Makefile: rearrange targets
selftests/efivarfs: add create-read test
selftests/efivarfs: add empty file creation test
selftests: add tests for efivarfs
kfifo: fix kfifo_alloc() and kfifo_init()
kfifo: move kfifo.c from kernel/ to lib/
arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
w1: add support for DS2413 Dual Channel Addressable Switch
memstick: move the dereference below the NULL test
drivers/pps/clients/pps-gpio.c: use devm_kzalloc
Documentation/DMA-API-HOWTO.txt: fix typo
include/linux/eventfd.h: fix incorrect filename is a comment
mtd: mtd_stresstest: use prandom_bytes()
mtd: mtd_subpagetest: convert to use prandom library
mtd: mtd_speedtest: use prandom_bytes
mtd: mtd_pagetest: convert to use prandom library
mtd: mtd_oobtest: convert to use prandom library
...
Sasha Levin [Thu, 28 Feb 2013 01:06:00 +0000 (17:06 -0800)]
hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cyrill Gorcunov [Thu, 28 Feb 2013 01:05:58 +0000 (17:05 -0800)]
kcmp: make it depend on CHECKPOINT_RESTORE
Since kcmp syscall has been implemented (initially on x86 architecture) a
number of other archs wire it up as well: xtensa, sparc, sh, s390, mips,
microblaze, m68k (not taking into account those who uses
<asm-generic/unistd.h> for syscall numbers definitions).
But the Makefile, which turns kcmp.o generation on still depends on former
config-x86. Thus get rid of this limitation and make kcmp.o depend on
CHECKPOINT_RESTORE option.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Kerr [Thu, 28 Feb 2013 01:05:57 +0000 (17:05 -0800)]
selftests: add a simple doc
This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.
[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt] Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Kerr [Thu, 28 Feb 2013 01:05:55 +0000 (17:05 -0800)]
selftests/efivarfs: add create-read test
Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Kerr [Thu, 28 Feb 2013 01:05:53 +0000 (17:05 -0800)]
selftests/efivarfs: add empty file creation test
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Kerr [Thu, 28 Feb 2013 01:05:52 +0000 (17:05 -0800)]
selftests: add tests for efivarfs
This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.
The open-unlink test is based on code from Lingzhu Xiang.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefani Seibold [Thu, 28 Feb 2013 01:05:51 +0000 (17:05 -0800)]
kfifo: fix kfifo_alloc() and kfifo_init()
Fix kfifo_alloc() and kfifo_init() to alloc at least the requested number
of elements. Since the kfifo operates on power of 2 the request size will
be rounded up to the next power of two.
Julia Lawall [Thu, 28 Feb 2013 01:05:44 +0000 (17:05 -0800)]
drivers/pps/clients/pps-gpio.c: use devm_kzalloc
devm_kzalloc allocates memory that is released when a driver detaches.
This patch uses devm_kzalloc for data that is allocated in the probe
function of a platform device and is only freed in the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log