Yinghai Lu [Mon, 25 Feb 2008 05:36:28 +0000 (21:36 -0800)]
x86: apic_is_clustered_box for vsmp
quad core 8 socket system will have apic id lifting.the apic id range could
be [4, 0x23]. and apic_is_clustered_box will think that need to three clusters
and that is larger than 2. So it is treated as a clustered_box.
and will get:
Marking TSC unstable due to TSCs unsynchronized
even if the CPUs have X86_FEATURE_CONSTANT_TSC set.
this quick fix will check if the cpu is from AMD.
but vsmp still needs that checking...
this patch is fix to make sure that vsmp not to be passed.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
found one entry about reserved is missing for the kernel by kexec.
it turns out init_apic_mappings is called before e820_reserve_resources
in setup_arch. but e820_reserve_resources is using request_resource.
it will not handle the conflicts.
there are three ways to fix it:
1. change request_resource in e820_reserve_resources to to insert_resource
2. move init_apic_mappings after e820_reserve_resources
3. use late_initcall to insert lapic resource.
this patch is using method 3, that is less intrusive.
Yinghai Lu [Sat, 23 Feb 2008 01:07:16 +0000 (17:07 -0800)]
x86: clean up e820_reserve_resources on 64-bit
e820_resource_resources could use insert_resource instead of request_resource
also move code_resource, data_resource, bss_resource, and crashk_res
out of e820_reserve_resources.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Copy x86_64 and add a head32.c so we can start moving early
architecture initialization out of assembly.
[ Sam Ravnborg <sam@ravnborg.org>: updated it to x86 ]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Sun, 24 Feb 2008 05:48:42 +0000 (21:48 -0800)]
x86: make amd quad core 8 socket system not be clustered_box, #2
quad core 8 socket system will have apic id lifting.the apic id range could
be [4, 0x23]. and apic_is_clustered_box will think that need to three clusters
and that is large than 2. So it is treated as clustered_box.
and will get
Marking TSC unstable due to TSCs unsynchronized
even the CPUs have X86_FEATURE_CONSTANT_TSC set.
this patch will check if the cpu is from AMD.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change /proc/cpuinfo on 32-bit, it will look like on 64-bit.
'power management' line is added and power management information
will be printed at the line.
Paolo Ciarrocchi [Tue, 19 Feb 2008 22:09:59 +0000 (23:09 +0100)]
x86: coding style fixes to arch/x86/lib/string_32.c
The patch kills 45 errors and a few warnings.
The file is now error/warning free:
total: 0 errors, 0 warnings, 237 lines checked
arch/x86/lib/string_32.c has no obvious style problems and is ready for submission.
Ian Campbell [Tue, 19 Feb 2008 11:12:30 +0000 (11:12 +0000)]
x86: boot protocol updates
Also update field names to simply payload_{offset,length} so as to not rule
out uncompressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
David P. Reed [Mon, 18 Feb 2008 18:58:34 +0000 (13:58 -0500)]
x86: define outb_pic and inb_pic to stop using outb_p and inb_p
x86: define outb_pic and inb_pic to stop using outb_p and inb_p
The delay between io port accesses to the PIC is now defined using outb_pic
and inb_pic. This fix provides the next step, using udelay(2) to define the
*PIC specific* timing requirements, rather than on bus-oriented timing, which
is not well calibrated.
Again, the primary reason for fixing this is to use proper delay strategy,
and in particular to fix crashes that can result from using port 80 writes
on machines that have resources on port 80, such as the ENE chips used by Quanta
in latops it designs and sells to, e.g. HP.
Signed-off-by: David P. Reed <dpreed@reed.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David P. Reed [Sun, 17 Feb 2008 21:56:39 +0000 (16:56 -0500)]
x86: fix cmos read and write to not use inb_p and outb_p
fix code to access CMOS rtc registers so that it does not use inb_p and
outb_p routines, which are deprecated. Extensive research on all known
CMOS RTC chipset timing shows that there is no need for a delay in
accessing the registers of these chips even on old machines. These chipa
are never on an expansion bus, but have always been "motherboard"
resources, either in the processor chipset or explicitly on the
motherboard, and they are not part of the ISA/LPC or PCI buses, so
delays should not be based on bus timing. The reason to fix it:
1) port 80 writes often hang some laptops that use ENE EC chipsets,
esp. those designed and manufactured by Quanta for HP;
2) RTC accesses are timing sensitive, and extra microseconds may matter;
3) the new "io_delay" function is calibrated by expansion bus timing needs,
thus is not appropriate for access to CMOS rtc registers.
Signed-off-by: David P. Reed <dpreed@reed.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Petazzoni [Fri, 15 Feb 2008 11:00:23 +0000 (12:00 +0100)]
x86: use ELF section to list CPU vendor specific code
Replace the hardcoded list of initialization functions for each CPU
vendor by a list in an ELF section, which is read at initialization in
arch/x86/kernel/cpu/cpu.c to fill the cpu_devs[] array. The ELF
section, named .x86cpuvendor.init, is reclaimed after boot, and
contains entries of type "struct cpu_vendor_dev" which associates a
vendor number with a pointer to a "struct cpu_dev" structure.
This first modification allows to remove all the VENDOR_init_cpu()
functions.
This patch also removes the hardcoded calls to early_init_amd() and
early_init_intel(). Instead, we add a "c_early_init" member to the
cpu_dev structure, which is then called if not NULL by the generic CPU
initialization code. Unfortunately, in early_cpu_detect(), this_cpu is
not yet set, so we have to use the cpu_devs[] array directly.
This patch is part of the Linux Tiny project, and is needed for
further patch that will allow to disable compilation of unused CPU
support code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86: reducing debuginfo size by removing unneeded includes
I found it strange that the struct sk_buff definition was found
inside the DWARF debugging sections in the generated object, so I verified
and found that there is no need for the files that bring struct sk_buff
definition into this file and verified also that sk_buff is not brought
in indirectly too, thru other headers.
I went on and removed many other unneeded includes and the end
result is:
Ian Campbell [Wed, 13 Feb 2008 20:54:58 +0000 (20:54 +0000)]
x86: use ELF format in compressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: virtualization@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleen [Sat, 9 Feb 2008 15:16:59 +0000 (16:16 +0100)]
x86: add warning when RTC clock reports binary
We assume that the RTC clock is BCD, so print a warning if it claims
to be binary.
[ tglx@linutronix.de: changed to WARN_ON - we want to know that!
If no one reports it we can remove the complete if (RTC_ALWAYS_BCD)
magic, which has RTC_ALWAYS_BCD defined to 1 since Linux 1.0 ... ]
x86: do kernel direct mapping at boot using GB pages
The AMD Fam10h CPUs support new Gigabyte page table entry for
mapping 1GB at a time. Use this for the kernel direct mapping.
Only done for 64bit because i386 does not support GB page tables.
This only applies to the data portion of the direct mapping; the
kernel text mapping stays with 2MB pages because the AMD Fam10h
microarchitecture does not support GB ITLBs and AMD recommends
against using GB mappings for code.
Can be disabled with disable_gbpages on the kernel command line
[ tglx@linutronix.de: simplify enable code ]
[ Yinghai Lu <yinghai.lu@sun.com>: boot fix on 256 GB RAM ]
These new controls toggle experimental support for a new CPU feature,
the straightforward extension of largepages from the pmd level to the
pud level, which allows 1GB (kernel) TLBs instead of 2MB TLBs.
Turn it off by default, as this code has not been tested well enough yet.
Use the CONFIG_DIRECT_GBPAGES=y .config option or gbpages on the
boot line can be used to enable it. If enabled in the .config then
nogbpages boot option disables it.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 17 Apr 2008 15:40:45 +0000 (17:40 +0200)]
x86: clean up the page table dumper and add 32-bit support
Clean up the page table dumper (fix boundary conditions, table driven
address ranges, some formatting changes since it is no longer using
the kernel log but a separate virtual file), and generalize to 32
bits.
[ mingo@elte.hu: x86: fix the pagetable dumper ]
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Arjan van de Ven [Thu, 17 Apr 2008 15:40:45 +0000 (17:40 +0200)]
x86: add code to dump the (kernel) page tables for visual inspection by kernel developers
This patch adds code to the kernel to have an (optional)
/proc/kernel_page_tables debug file that basically dumps the kernel
pagetables; this allows us kernel developers to verify that nothing fishy is
going on and that the various mappings are set up correctly. This was quite
useful in finding various change_page_attr() bugs, and is very likely to be
useful in the future as well.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: mingo@elte.hu Cc: tglx@tglx.de Cc: hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 17 Apr 2008 15:40:45 +0000 (17:40 +0200)]
x86: unify arch/x86/mm/Makefile
Unify arch/x86/mm/Makefile between 32 and 64 bits.
All configuration variables that are protected by Kconfig constraints
have been put in the common part of the Makefile; however, the NUMA
files are totally different between 32 and 64 bits and are handled via
an ifdef.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Roland McGrath [Wed, 9 Apr 2008 08:30:06 +0000 (01:30 -0700)]
x86 vDSO: don't map 32-bit vdso when disabled
We map a VMA for the 32-bit vDSO even when it's disabled, which is stupid.
For the 32-bit kernel it's the vdso_enabled boot parameter/sysctl
and for the 64-bit kernel it's the vdso32 boot parameter/syscall32 sysctl.
When it's disabled, we don't pass AT_SYSINFO_EHDR so processes don't use
the vDSO for anything, but we still map it. For the non-compat vDSO,
this means we're always putting an extra VMA somewhere, maybe lousing
up the control of the address space the user was hoping for.
Honor the setting by doing nothing in arch_setup_additional_pages.
[ also see: "x86 vDSO: don't use disabled vDSO for signal trampoline" ]
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Roland McGrath [Wed, 9 Apr 2008 08:29:27 +0000 (01:29 -0700)]
x86 vDSO: don't use disabled vDSO for signal trampoline
If the vDSO was not mapped, don't use it as the "restorer" for a signal
handler. Whether we have a pointer in mm->context.vdso depends on what
happened at exec time, so we shouldn't check any global flags now.
Background:
Currently, every 32-bit exec gets the vDSO mapped even if it's disabled
(the process just doesn't get told about it). Because it's in fact
always there, the bug that this patch fixes cannot happen now. With
the second patch, it won't be mapped at all when it's disabled, which is
one of the things that people might really want when they disable it (so
nothing they didn't ask for goes into their address space).
The 32-bit signal handler setup when SA_RESTORER is not used refers to
current->mm->context.vdso without regard to whether the vDSO has been
disabled when the process was exec'd. This patch fixes this not to use
it when it's null, which becomes possible after the second patch. (This
never happens in normal use, because glibc's sigaction call uses
SA_RESTORER unless glibc detected the vDSO.)
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 21 Feb 2008 11:50:51 +0000 (12:50 +0100)]
x86: increase the kernel text limit to 512 MB
people sometimes do crazy stuff like building really large static
arrays into their kernels or building allyesconfig kernels. Give
more space to the kernel and push modules up a bit: kernel has
512 MB and modules have 1.5 GB.
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
it821x: do not describe noraid parameter with its value
Pb1200/DBAu1200: fix bad IDE resource size
Au1200: IDE driver build fix
Au1200: kill IDE driver function prototypes
avr32 mustn't select HAVE_IDE
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Pb1200/DBAu1200: fix bad IDE resource size
The header files for the Pb1200/DBAu1200 boards have wrong definition for the
IDE interface's decoded range length -- it should be 512 bytes according to
what the IDE driver does. In addition, the IDE platform device claims 1 byte
too many for its memory resource -- fix the platform code and the IDE driver
in accordance.
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Au1200: IDE driver build fix
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled:
drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable':
drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function
`sg_virt'
drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function
`sg_next'
drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from
integer without a cast
Fix this by including <linux/scatterlist.h>. While at it, remove the #include's
without which the driver happily builds.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sergei Shtylyov [Wed, 16 Apr 2008 23:14:33 +0000 (01:14 +0200)]
Au1200: kill IDE driver function prototypes
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c:
include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared
`static' but never defined
include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared
`static' but never defined
by wiping out the whole "function prototyping" section from the header file
<asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are
already dead in the IDE driver; move the only useful prototype into the driver.
Adrian Bunk [Wed, 16 Apr 2008 23:14:32 +0000 (01:14 +0200)]
avr32 mustn't select HAVE_IDE
There's a libata based PATA driver for avr32, but no support for
drivers/ide/ on avr32.
This patch fixes the following compile error:
<-- snip -->
...
CC [M] drivers/ide/ide-cd.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory
make[3]: *** [drivers/ide/ide-cd.o] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
projects / linux-beck.git / log