drm/i915: Choose real sdvo output according to result from detection
Baed on Eric's idea in order to handle multiple sdvo encoders
we implement another approach to dynamically chose real one
encoder after detection, which is contrasted with patch -
drm/i915:Construct all possible sdvo outputs for sdvo encoder.
Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
I had one report of flicker due to FIFO underruns on 845G. Scott was
kind enough to test a few patches and report success with this one.
Looks like 845G measures FIFO size slightly differently than other
chips, and we were also clobbering the FIFO burst length. Fixing both
of those issues gives him a healthy machine again.
Note that we still only adjust plane A's watermark in the 830/845
case. If someone is willing to test we could support a bigger variety
of dual-head 830/845 configurations with a bit more code.
Fixes fdo bug #19304 (again).
Reported-by: Scott Hansen <scottandchrystie@comcast.net> Tested-by: Scott Hansen <scottandchrystie@comcast.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Thu, 23 Jul 2009 17:00:33 +0000 (01:00 +0800)]
drm/i915: fix VGA detect on IGDNG
Check FORCE_DETECT bit to be clear for the finish
of hotplug detect process. Also check possible mono
monitor which should also be marked as connected.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Thu, 23 Jul 2009 17:00:32 +0000 (01:00 +0800)]
drm/i915: Add eDP support on IGDNG mobile chip
This adds embedded DisplayPort support on next mobile chip which
aims to replace origin LVDS port. VBT's driver feature block has
been used to determine the type of current internal panel for eDP
or LVDS.
Currently no panel fitting support for eDP and backlight control
would be added in future.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Thu, 23 Jul 2009 17:00:30 +0000 (01:00 +0800)]
drm/i915: Fix channel ending action for DP aux transaction
We should use current channel 'status' bits to clear DP aux channel's
done and error bits, instead of using the channel setting bits, that
will set send/busy bit again to initiate new transaction.
This also includes also some minor cleanup.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Thu, 23 Jul 2009 17:00:29 +0000 (01:00 +0800)]
drm/i915: fix issue in display pipe setup on IGDNG
During pipe DPMS off, instead of busy waiting pipe off, insert
delays during wait and don't loop after enough tries which matches
spec requirement. Also try to match DPMS on path by disable FDI TX
PLL in DPMS off. Disable PF by writing PF_WIN_SZ which really trigger
the update.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Thu, 23 Jul 2009 17:00:28 +0000 (01:00 +0800)]
drm/i915: disable VGA plane reliably
This does VGA disable like DDX driver. SR01 bit 5 should be set
before VGA plane disable through control register, otherwise we
might get random crash and lockups.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Now the DVO timing in LVDS data entry is obtained by using the
following step:
a. get the entry size for every LVDS panel data
b. Get the LVDS fp entry for the preferred panel type
c. get the DVO timing by using entry->dvo_timing
In our driver the entry->dvo_timing is related with the size of
lvds_fp_timing. For example: the size is 46.
But it seems that the size of lvds_fp_timing varies on the differnt
platform. In such case we will get the incorrect DVO timing entry
because of the incorrect DVO offset in LVDS panel data entry.
This also removes a hack on new IGDNG to get proper DVO timing.
Calculate the DVO timing offset in LVDS data entry to get the DVO timing
a. get the DVO timing offset in the LVDS fp data entry by using the
pointer definition in LVDS data ptr
b. get the LVDS data entry
c. get the DVO timing by adding the DVO timing offset to data entry
drm/i915: hdmi detection according by reading edid
According to investigations from windows team ,hw team,
and our test results on all 4x platofrms available
(gm45, g45b, q45, g45a, g45c, g41a, and g41), we find
currently Hot plug live status and Hot plug interrupt
detection are not reliable, sometime the results from
the two approaches are contradicts. So we chose edid
detection for hdmi output.
Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
drm/i915: correct self-refresh calculation in "everything off" case
If no planes are enabled, the self-refresh calculation may end up doing
a divide by zero. This patch should prevent that by making sure at
least one of the CRTCs had a valid hdisplay value.
Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
If you're pushing a plane hard (i.e. you need most or all of the FIFO
entries just to cover your frame refresh latency), the watermark level
may end up being negative. So fix up the signed vs. unsigned math in
the calculation function to handle this correctly, giving all available
FIFO entries to such a configuration.
Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
I discovered several bugs in the FIFO code that was recently applied.
Some of them fell into the "how did this ever work" category, since in
some cases we were using the wrong FIFO size values, and the
calculations ended up being way off.
This patch fixes all the bugs I found, and works well on my GM45, 915GM
and 855GM test machines; but as usual with these sorts of patches
broader testing is definitely requested (in particular this patch
affects 830, 845 and 865 for which I don't have test hardware).
Overall, the patch clarifies the watermark calculation function by
adding some comments and debug info, and making the variable names a
bit clearer. The "get FIFO size" portion of the code has also been
corrected, so we should be able to properly detect the FIFO allocations
for each pipe, for use in the watermark calculation.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
This motherboard thinks it has an LVDS connected, so without this
patch the screen goes blank on the connected VGA monitor. More
information (for the non-KMS case) in fd.o bug #18004.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Keith Packard [Mon, 13 Jul 2009 06:53:17 +0000 (23:53 -0700)]
drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware
The 915 and 945 scanout engines can handle frame buffers up to 4096 pixels
wide. Pre-9xx hardware has an 8192 byte stride limit, and so we leave the
existing 2048 max in place.
I'm not sure why we limit the height to the same value; there's no intrinsic
hardware limit in the scanout engine.
Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
This patch refactors the existing error detection and collection code,
placing most of it in i915_handle_error(). Additionally, we introduce a
work queue for scheduling post-crash tasks such as generating a uevent.
Using the uevent facility, userspace should be able to capture a
post-mortem dump for diagnostics.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
drm/i915: Set lvds dual channel according to register from vbios
Vbios will set lvds register correctly based on
current algorithm for lingle/dual Channel LVDS when
system boot, so we can accept this configuration
directly, regardless of LVDS enable status.
It fixed freedesktop.org bug #22262
Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Eric Anholt <eric@anholt.net>
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Remove alloc_bootmem annotations introduced in the past
kmemleak: Add callbacks to the bootmem allocator
kmemleak: Allow partial freeing of memory blocks
kmemleak: Trace the kmalloc_large* functions in slub
kmemleak: Scan objects allocated during a scanning episode
kmemleak: Do not acquire scan_mutex in kmemleak_open()
kmemleak: Remove the reported leaks number limitation
kmemleak: Add more cond_resched() calls in the scanning thread
kmemleak: Renice the scanning thread to +10
fs/afs/dir.c: In function 'afs_d_revalidate':
fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function
fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function
by marking the 'fid' variable as an uninitialized_var. The problem is
that gcc doesn't always manage to work out that fid is always set on the
path through the function that uses it.
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Julien Tinnes [Fri, 26 Jun 2009 18:27:40 +0000 (20:27 +0200)]
personality: fix PER_CLEAR_ON_SETID
We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't
include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO.
The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE.
We believe it is important to add MMAP_PAGE_ZERO, because by using this
personality it is possible to have the first page mapped inside a
process running as setuid root. This could be used in those scenarios:
- Exploiting a NULL pointer dereference issue in a setuid root binary
- Bypassing the mmap_min_addr restrictions of the Linux kernel: by
running a setuid binary that would drop privileges before giving us
control back (for instance by loading a user-supplied library), we
could get the first page mapped in a process we control. By further
using mremap and mprotect on this mapping, we can then completely
bypass the mmap_min_addr restrictions.
Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added
since on x86 32bits it will in practice disable most of the address
space layout randomization (only the stack will remain randomized).
Signed-off-by: Julien Tinnes <jt@cr0.org> Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Acked-by: Christoph Hellwig <hch@infradead.org> Acked-by: Kees Cook <kees@ubuntu.com> Acked-by: Eugene Teo <eugene@redhat.com>
[ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x
This causes kernel images that don't run init to completion with certain
broken gcc versions.
This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012
I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230
Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.
Reported-by: Barry K. Nathan <barryn@pobox.com> Pushed-by: Frans Pop <elendil@planet.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: dan <dan@deeog.com> Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com> Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.
CC: walt <w41ter@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Thu, 9 Jul 2009 12:36:22 +0000 (13:36 +0100)]
tty: Fix USB kref leak
The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: fix corruption dump
UBIFS: clean up free space checking
UBIFS: small amendments in the LEB scanning code
UBIFS: dump a little more in case of corruptions
MAINTAINERS: update ahunter's e-mail address
UBIFS: allow more than one volume to be mounted
UBIFS: fix assertion warning
UBIFS: minor spelling and grammar fixes
UBIFS: fix 64-bit divisions in debug print
UBIFS: few spelling fixes
UBIFS: set write-buffer timout to 3-5 seconds
UBIFS: slightly optimize write-buffer timer usage
UBIFS: improve debugging messaged
UBIFS: fix integer overflow warning
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
osdblk: Adjust queue limits to lower device's limits
osdblk: a Linux block device for OSD objects
MAINTAINERS: Add osd maintained files (F:)
exofs: Avoid using file_fsync()
exofs: Remove IBM copyrights
exofs: Fix bio leak in error handling path (sync read)
Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
drm/i915: Fix for LVDS VBT change on IGDNG
drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
drm/i915: Refactor calls to unmap_mapping_range
drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
drm: Disable the unused connectors explicitly when resuming with KMS.
drm/i915: Restore the KMS modeset for every activated CRTC
drm/i915: Fix harmless warning from patch merged after i2c rework.
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
drm/i915: Check the LID device to decide whether the LVDS should be initialized
drm/i915: Move lock to more reasonable location
drm/i915: Add gtt_offset to gem object list debugfs output
drm/i915: Remove gtt_bound from drm_i915_gem_object
drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
drm/i915: crt fetch EDID by DVI-I converter on G4x platform
drm/i915: Don't update display FIFO watermark on IGDNG
drm/i915: Adjust DisplayPort clocks to use 96MHz reference
drm/i915: Make driver less chatty
drm/i915: fix up a raw 64bit divide
drm/i915: enable sdvo lvds scaling function.
drm/i915: Set SSC frequency for 8xx chips correctly
...
Larry Finger [Sat, 11 Jul 2009 01:06:42 +0000 (20:06 -0500)]
fuse: Fix build error
When building v2.6.31-rc2-344-g69ca06c, the following build errors are
found due to missing includes:
CC [M] fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)
Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix disorder in cp count on error during deleting checkpoints
nilfs2: fix lockdep warning between regular file and inode file
nilfs2: fix incorrect KERN_CRIT messages in case of write failures
nilfs2: fix hang problem of log writer which occurs after write failures
nilfs2: remove unlikely directive causing mis-conversion of error code
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
dma-debug: Fix the overlap() function to be correct and readable
oprofile: reset bt_lost_no_mapping with other stats
x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
signals: declare sys_rt_tgsigqueueinfo in syscalls.h
rcu: Mark Hierarchical RCU no longer experimental
dma-debug: Put all hash-chain locks into the same lock class
dma-debug: fix off-by-one error in overlap function
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
perf report: Add "Fractal" mode output - support callchains with relative overhead rate
perf_counter tools: callchains: Manage the cumul hits on the fly
perf report: Change default callchain parameters
perf report: Use a modifiable string for default callchain options
perf report: Warn on callchain output request from non-callchain file
x86: atomic64: Inline atomic64_read() again
x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
x86: atomic64: Improve atomic64_xchg()
x86: atomic64: Export APIs to modules
x86: atomic64: Improve atomic64_read()
x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
x86: atomic64: Fix unclean type use in atomic64_xchg()
x86: atomic64: Make atomic_read() type-safe
x86: atomic64: Reduce size of functions
x86: atomic64: Improve atomic64_add_return()
x86: atomic64: Improve cmpxchg8b()
x86: atomic64: Improve atomic64_read()
x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
perf report: Annotate variable initialization
...
Peter Zijlstra [Fri, 10 Jul 2009 12:57:56 +0000 (14:57 +0200)]
sched: INIT_PREEMPT_COUNT
Pull the initial preempt_count value into a single
definition site.
Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.
The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.
Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhenyu Wang [Fri, 10 Jul 2009 06:39:59 +0000 (14:39 +0800)]
drm/i915: Fix for LVDS VBT change on IGDNG
IGDNG mobile chip's LVDS data block removes panel fitting
register definition. So this fixes offset for LVDS timing
block parsing. Thanks for Michael Fu to catch this.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 10 Jul 2009 20:02:26 +0000 (13:02 -0700)]
drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
As of 52dc7d32b88156248167864f77a9026abe27b432, we could leave an old
linear GTT mapping in place, so that apps trying to GTT-mapped write in
tiled data wouldn't get the fence added, and garbage would get displayed.
dma-debug: Fix the overlap() function to be correct and readable
Linus noticed how unclean and buggy the overlap() function is:
- It uses convoluted (and bug-causing) positive checks for
range overlap - instead of using a more natural negative
check.
- Even the positive checks are buggy: a positive intersection
check has four natural cases while we checked only for three,
missing the (addr < start && addr2 == end) case for example.
- The variables are mis-named, making it non-obvious how the
check was done.
- It needlessly uses u64 instead of unsigned long. Since these
are kernel memory pointers and we explicitly exclude highmem
ranges anyway we cannot ever overflow 32 bits, even if we
could. (and on 64-bit it doesnt matter anyway)
All in one, this function needs a total revamp. I used Linus's
suggestions minus the paranoid checks (we cannot overflow really
because if we get totally bad DMA ranges passed far more things
break in the systems than just DMA debugging). I also fixed a
few other small details i noticed.
drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.
drm/i915: Restore the KMS modeset for every activated CRTC
Restore the modeset for every activated CRTC in course of resume.
This is realized by calling the function of drm_helper_resume_force_mode.
Note: it is meaningful only for the KMS mode.
Eric Anholt [Thu, 2 Jul 2009 16:30:50 +0000 (09:30 -0700)]
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture. This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway. So, instead
of working around it, just fail out verbosely.
fd.o bug #21574
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix trace_print_seq()
kprobes: No need to unlock kprobe_insn_mutex
tracing/fastboot: Document the need of initcall_debug
trace_export: Repair missed fields
tracing: Fix stack tracer sysctl handling
In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.
Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.
Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.
=
The semantics of SG_DXFER_TO_FROM_DEV were:
- copy user space buffer to kernel (LLD) buffer
- do SCSI command which is assumed to be of the DATA_IN
(data from device) variety. This would overwrite
some or all of the kernel buffer
- copy kernel (LLD) buffer back to the user space.
The idea was to detect short reads by filling the original
user space buffer with some marker bytes ("0xec" it would
seem in this report). The "resid" value is a better way
of detecting short reads but that was only added this century
and requires co-operation from the LLD.
=
This patch changes the block layer mapping API to support this
semantics. This simply adds another field to struct rq_map_data and
enables __bio_copy_iov() to copy data from user space even with READ
requests.
It's better to add the flags field and kills null_mapped and the new
from_user fields in struct rq_map_data but that approach makes it
difficult to send this patch to stable trees because st and osst
drivers use struct rq_map_data (they were converted to use the block
layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer
mapping API.
zhou sf reported this regiression and tested this patch:
Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.
Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Maynard Johnson [Wed, 27 May 2009 15:15:08 +0000 (10:15 -0500)]
oprofile: reset bt_lost_no_mapping with other stats
The bt_lost_no_mapping is not getting reset at the start of a
profiling run, thus the oprofiled.log shows erroneous values for this
statistic. The attached patch fixes this problem.
Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* fix/asoc:
ASoC: Fix wm8753 register cache size and initialization
ASoC: add locking to mpc5200-psc-ac97 driver
ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
ASoC: Fix register cache initialisation for WM8753
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support
[WATCHDOG] SA1100 watchdog maximum timeout
[WATCHDOG] w83697ug, fix lock imbalance
[WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: when ATTR_READONLY is set, only clear write bits on non-directories
cifs: remove cifsInodeInfo->inUse counter
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
[CIFS] update cifs version number
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
cifs: add pid of initiating process to spnego upcall info
cifs: fix regression with O_EXCL creates and optimize away lookup
cifs: add new cifs_iget function and convert unix codepath to use it
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
cxgb3: Fix crash caused by stashing wrong netdev_queue
ixgbe: Fix coexistence of FCoE and Flow Director in 82599
memory barrier: adding smp_mb__after_lock
net: adding memory barrier to the poll and receive callbacks
netpoll: Fix carrier detection for drivers that are using phylib
includecheck fix: include/linux, rfkill.h
p54: tx refused but queue active
Atheros Kconfig needs to be dependent on WLAN_80211
mac80211: fix docbook
mac80211_hwsim: avoid NULL access
ssb: Add support for 4318E
b43: Add support for 4318E
zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
zd1211rw: 07b8:6001 is a ZD1211B
r6040: bump driver version to 0.24 and date to 08 July 2009
r6040: restore MIER register correctly when IRQ line is shared
ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
davinci_emac: fix kernel oops when changing MAC address while interface is down
igb: set lan id prior to configuring phy
mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
...
Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland Dreier [Thu, 9 Jul 2009 09:30:25 +0000 (09:30 +0000)]
cxgb3: Fix crash caused by stashing wrong netdev_queue
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how
cxgb3 looks up the netdev_queue it stashes away in a qset during
initialization. For multiport devices, the TX queue index it uses is
offset by the first_qset index of each port. This leads to a crash
once LLTX is removed, since hard_start_xmit is called with one TX
queue lock held, while the TX reclaim timer task grabs a different
(wrong) TX queue lock when it frees skbs.
Fix this by removing the first_qset offset used to look up the TX
queue passed into t3_sge_alloc_qset() from setup_sge_qsets().
Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Zou [Thu, 9 Jul 2009 02:29:50 +0000 (02:29 +0000)]
ixgbe: Fix coexistence of FCoE and Flow Director in 82599
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR)
in 82599 and remove the disabling of FDIR when FCoE is enabled.
Currently, FDIR is turned off when FCoE is enabled under the assumption that
FCoE is always enabled with DCB being turned on. However, FDIR does not have
to be turned off all the time when FCoE is enabled since FCoE can be enabled
without DCB being turned on, e.g., use link pause only. This patch makes sure
that when DCB is turned on or off, FDIR is turned on or off correspondingly;
and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR
set up properly so FCoE and FDIR can coexist regardless of DCB being on or off.
Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Olsa [Wed, 8 Jul 2009 12:09:13 +0000 (12:09 +0000)]
net: adding memory barrier to the poll and receive callbacks
Adding memory barrier after the poll_wait function, paired with
receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper
to wrap the memory barrier.
Without the memory barrier, following race can happen.
The race fires, when following code paths meet, and the tp->rcv_nxt
and __add_wait_queue updates stay in CPU caches.
If there was no cache the code would work ok, since the wait_queue and
rcv_nxt are opposit to each other.
Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already
passed the tp->rcv_nxt check and sleeps, or will get the new value for
tp->rcv_nxt and will return with new data mask.
In both cases the process (CPU1) is being added to the wait queue, so the
waitqueue_active (CPU2) call cannot miss and will wake up CPU1.
The bad case is when the __add_wait_queue changes done by CPU1 stay in its
cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then
endup calling schedule and sleep forever if there are no more data on the
socket.
Calls to poll_wait in following modules were ommited:
net/bluetooth/af_bluetooth.c
net/irda/af_irda.c
net/irda/irnet/irnet_ppp.c
net/mac80211/rc80211_pid_debugfs.c
net/phonet/socket.c
net/rds/af_rds.c
net/rfkill/core.c
net/sunrpc/cache.c
net/sunrpc/rpc_pipe.c
net/tipc/socket.c
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Layton [Thu, 9 Jul 2009 05:46:44 +0000 (01:46 -0400)]
cifs: when ATTR_READONLY is set, only clear write bits on non-directories
cifs: when ATTR_READONLY is set, only clear write bits on non-directories
On windows servers, ATTR_READONLY apparently either has no meaning or
serves as some sort of queue to certain applications for unrelated
behavior. This MS kbase article has details:
http://support.microsoft.com/kb/326549/
Don't clear the write bits directory mode when ATTR_READONLY is set.
Reported-by: pouchat@peewiki.net Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Thu, 9 Jul 2009 05:46:39 +0000 (01:46 -0400)]
cifs: remove cifsInodeInfo->inUse counter
cifs: remove cifsInodeInfo->inUse counter
It was purported to be a refcounter of some sort, but was never
used that way. It never served any purpose that wasn't served equally well
by the I_NEW flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Thu, 9 Jul 2009 05:46:37 +0000 (01:46 -0400)]
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
Rather than allocating an inode and filling it out, have
cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means
a pretty hefty reorganization of cifs_get_inode_info.
For the readdir codepath, add a couple of new functions for filling out
cifs_fattr's from different FindFile response infolevels.
Finally, remove cifs_new_inode since there are no more callers.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
Zhao Yakui [Fri, 26 Jun 2009 01:46:18 +0000 (09:46 +0800)]
drm/i915: Check the LID device to decide whether the LVDS should be initialized
On some boxes the mobile chipset is used and there is no LVDS device. In such
case we had better not initialize the LVDS output device so that one pipe can
be used for other output device. For example: E-TOP.
But unfortunately the LVDS device is still initialized on the boxes based on
mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be
used for other output device.
After checking the acpidump we find that there is no LID device on such boxes.
In such case we can use the LID device to decide whether the LVDS device should
be initialized.
If there is no LID device, we can think that there is no LVDS device. It is
unnecessary to initialize the LVDS output device.
If there exists the LID device, it will continue the current flowchart.
Maybe on some boxes there is no LVDS device but the LID device is found. In
such case it should be added to the quirk list.
Jeff Layton [Fri, 10 Jul 2009 00:02:50 +0000 (20:02 -0400)]
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
When there's an open filehandle, SET_FILE_INFO is apparently preferred
over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC
infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the
new call when there's an open filehandle available.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Raphael Assenat [Mon, 29 Jun 2009 17:56:52 +0000 (13:56 -0400)]
[WATCHDOG] SA1100 watchdog maximum timeout
This patch replaces the hardcoded 255 seconds limit for a real limit based on
oscr_freq.
Also, the 'firmware_version' field is changed to '1' to allow the user
space application to easily detect that this driver supports a higher
maximum timeout.
Signed-off-by: Raphael Assenat <raph@8D.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and
ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74357477558183b43156c5536b642de134
Signed-off-by: David Heidelberger <d.okias@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
kmemleak: Remove alloc_bootmem annotations introduced in the past
kmemleak_alloc() calls were added in some places where alloc_bootmem was
called. Since now kmemleak tracks bootmem allocations, these explicit
calls should be run.
Paul Vojta [Thu, 9 Jul 2009 06:57:46 +0000 (23:57 -0700)]
ALSA: hda - fix beep tone calculation for IDT/STAC codecs
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond
to higher frequencies and vice versa. The current code has this backwards,
resulting in beep frequencies which are way too high (and sound bad on
tinny laptop speakers, resulting in complaints).
[Also added hz <= 0 check by tiwai]
Signed-off-by: Paul Vojta <vojta@math.berkeley.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Artem Bityutskiy [Mon, 29 Jun 2009 16:27:14 +0000 (19:27 +0300)]
UBIFS: fix corruption dump
In the 'ubifs_recover_leb()' function, when we find corrupted
empty space, we dump 8K starting from the offset where the last
node ends. This is OK if the corrupted empty space is somewhere
near that offset. But if the corruption is far at the end of the
LEB, we will dump all 0xFF bytes and complitely ignore the
interesting data. This is observed on a PPC ("kilauea") with
NOR flash.
This patch changes the behavior and teaches UBIFS to print only
interesting data. I.e., now we find where corruption starts and
start dumping from that offset.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
Artem Bityutskiy [Mon, 29 Jun 2009 15:58:34 +0000 (18:58 +0300)]
UBIFS: clean up free space checking
recovery.c has 'is_empty()' helper and it is better to use
this helper instead of re-implementing it in several places.
This patch does this and removes some amount of unneeded code.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
Artem Bityutskiy [Mon, 29 Jun 2009 14:59:23 +0000 (17:59 +0300)]
UBIFS: small amendments in the LEB scanning code
This patch fixes few minor things I've spotted while going through
code:
1. Better document return codes
2. If 'ubifs_scan_a_node()' returns some thing we do not expect,
treat this as an error.
3. Try to do recovery only when 'ubifs_scan()' returns %-EUCLEAN,
not on any error.
4. If empty space starts at a non-aligned address, print a message.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
Artem Bityutskiy [Mon, 29 Jun 2009 13:25:33 +0000 (16:25 +0300)]
UBIFS: dump a little more in case of corruptions
In case of corruptions, dump 8192 bytes instead of 4096. The
largest node is 4096+ bytes, so it is better to see a node
boundary, which is not always possible when only 4096 bytes
are printed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
Anton Vorontsov [Thu, 9 Jul 2009 03:09:44 +0000 (20:09 -0700)]
netpoll: Fix carrier detection for drivers that are using phylib
Using early netconsole and gianfar driver this error pops up:
netconsole: timeout waiting for carrier
It appears that net/core/netpoll.c:netpoll_setup() is using
cond_resched() in a loop waiting for a carrier.
The thing is that cond_resched() is a no-op when system_state !=
SYSTEM_RUNNING, and so drivers/net/phy/phy.c's state_queue is never
scheduled, therefore link detection doesn't work.
I belive that the main problem is in cond_resched()[1], but despite
how the cond_resched() story ends, it might be a good idea to call
msleep(1) instead of cond_resched(), as suggested by Andrew Morton.
[1] http://lkml.org/lkml/2009/7/7/463
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Thu, 9 Jul 2009 00:05:32 +0000 (17:05 -0700)]
fealnx: Fix build breakage -- PR_CONT should be KERN_CONT
Commit ad361c98 ("Remove multiple KERN_ prefixes from printk formats")
broke the build for fealnx because it added some "printk(PR_CONT ..."
calls, when PR_CONT doesn't exist; it should be "printk(KERN_CONT ..."
Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log