NeilBrown [Mon, 31 Jan 2011 01:10:09 +0000 (12:10 +1100)]
md: Remove the AllReserved flag for component devices.
This flag is not needed and is used badly.
Devices that are included in a native-metadata array are reserved
exclusively for that array - and currently have AllReserved set.
They all are bd_claimed for the rdev and so cannot be shared.
Devices that are included in external-metadata arrays can be shared
among multiple arrays - providing there is no overlap.
These are bd_claimed for md in general - not for a particular rdev.
When changing the amount of a device that is used in an array we need
to check for overlap. This currently includes a check on AllReserved
So even without overlap, sharing with an AllReserved device is not
allowed.
However the bd_claim usage already precludes sharing with these
devices, so the test on AllReserved is not needed. And in fact it is
wrong.
As this is the only use of AllReserved, simply remove all usage and
definition of AllReserved.
NeilBrown [Mon, 31 Jan 2011 00:57:43 +0000 (11:57 +1100)]
md: don't abort checking spares as soon as one cannot be added.
As spares can be added manually before a reshape starts, we need to
find them all to mark some of them as in_sync.
Previously we would abort looking for spares when we found an
unallocated spare what could not be added to the array (implying there
was no room for new spares). However already-added spares could be
later in the list, so we need to keep searching.
NeilBrown [Mon, 31 Jan 2011 00:57:43 +0000 (11:57 +1100)]
md: fix the test for finding spares in raid5_start_reshape.
As spares can be added to the array before the reshape is started,
we need to find and count them when checking there are enough.
The array could have been degraded, so we need to check all devices,
no just those out side of the range of devices in the array before
the reshape.
So instead of checking the index, check the In_sync flag as that
reliably tells if the device is a spare or this purpose.
NeilBrown [Mon, 31 Jan 2011 00:57:42 +0000 (11:57 +1100)]
md: revert change to raid_disks on failure.
If we try to update_raid_disks and it fails, we should put
'delta_disks' back to zero. This is important because some code,
such as slot_store, assumes that delta_disks has been validated.
Linus Torvalds [Fri, 28 Jan 2011 02:24:34 +0000 (12:24 +1000)]
Merge branch 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Route halt operations to safe_halt pvop.
xen/e820: Guard against E820_RAM not having page-aligned size or start.
xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.
Linus Torvalds [Fri, 28 Jan 2011 02:12:58 +0000 (12:12 +1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid picking MDS that is not active
ceph: avoid immediate cap check after import
ceph: fix flushing of caps vs cap import
ceph: fix erroneous cap flush to non-auth mds
ceph: fix cap_wanted_delay_{min,max} mount option initialization
ceph: fix xattr rbtree search
ceph: fix getattr on directory when using norbytes
Linus Torvalds [Fri, 28 Jan 2011 02:10:13 +0000 (12:10 +1000)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/nv50: fix regression on IGPs
drm/radeon/kms: re-emit full context state for evergreen blits
drm/radeon/kms: release CMASK access in preclose_kms
drm/radeon/kms: fix r6xx+ scanout on BE systems
drm/radeon/kms: clean up some magic numbers
drm/radeon/kms: only enable HDMI mode if radeon audio is enabled
radeon/kms: fix dp displayport mode validation
drm/nvc0/grctx: correct an off-by-one
drm/nv50: Fix race with PFIFO during PGRAPH context destruction.
drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.
drm/nvc0: implement irq handler for whatever's at 0x14xxxx
drm/nvc0: fix incorrect TPC register setup
drm/nouveau: probe for adt7473 before f75375
drm/nouveau: remove dead function definition
Linus Torvalds [Thu, 27 Jan 2011 20:43:41 +0000 (06:43 +1000)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
percpu, x86: Fix percpu_xchg_op()
x86: Remove left over system_64.h
x86-64: Don't use pointer to out-of-scope variable in dump_trace()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
bnx2: Eliminate AER error messages on systems not supporting it
cnic: Fix big endian bug
xfrm6: Don't forget to propagate peer into ipsec route.
tg3: Use new VLAN code
bonding: update documentation - alternate configuration.
TCP: fix a bug that triggers large number of TCP RST by mistake
MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
rt2x00: add device id for windy31 usb device
mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
ipv6: Revert 'administrative down' address handling changes.
textsearch: doc - fix spelling in lib/textsearch.c.
USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
pch_gbe: don't use flush_scheduled_work()
bnx2: Always set ETH_FLAG_TXVLAN
net: clear heap allocation for ethtool_get_regs()
ipv6: Always clone offlink routes.
dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
tcp: fix bug in listening_get_next()
inetpeer: Use correct AVL tree base pointer in inet_getpeer().
GRO: fix merging a paged skb after non-paged skbs
...
xen/setup: Route halt operations to safe_halt pvop.
With this patch, the cpuidle driver does not load and
does not issue the mwait operations. Instead the hypervisor
is doing them (b/c we call the safe_halt pvops call).
This fixes quite a lot of bootup issues wherein the user had
to force interrupts for the continuation of the bootup.
Reported-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Tested-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We were not handling that and ended up setting up a pagetable
that included up to df66e000 with the disastrous effect that when
memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
tried to clear the page it would crash at the 2K mark.
Initially reported by Michael Young @
http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00108.html
The fix is to page-align the size and also take into consideration
the start of the E820 (in case that is not page-aligned either). This
fixes the bootup failure on those affected machines.
This patch is a rework of the Micheal A Young initial patch and
considers the case if the start is not page-aligned.
Reported-by: Michael A Young <m.a.young@durham.ac.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Michael A Young <m.a.young@durham.ac.uk>
Stefan Bader [Thu, 27 Jan 2011 15:03:14 +0000 (10:03 -0500)]
xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.
In case the mfn_list does not have enough entries to fill
a p2m page we do not want the entries from max_pfn up to
the boundary to be filled with unknown values. Hence
set them to INVALID_P2M_ENTRY.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Alex Deucher [Tue, 25 Jan 2011 16:55:50 +0000 (11:55 -0500)]
drm/radeon/kms: fix r6xx+ scanout on BE systems
R6xx+ have per-block swappers. BE content in the
framebuffer will now be swapped properly during scanout.
Untested, however, the same code is reported working in
the UMS ddx.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 25 Jan 2011 22:14:50 +0000 (22:14 +0000)]
cnic: Fix big endian bug
The chip's page tables did not set up properly on big endian machines,
causing EEH errors on PPC machines.
Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Wed, 26 Jan 2011 21:13:10 +0000 (13:13 -0800)]
tg3: Use new VLAN code
This patch pivots the tg3 driver to the new VLAN infrastructure.
All references to vlgrp have been removed. The driver still attempts to
disable VLAN tag stripping if CONFIG_VLAN_8021Q or
CONFIG_VLAN_8021Q_MODULE is not defined.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
avr32: add missing include causing undefined pgtable_page_* references
This patch adds the linux/mm.h header file to the AVR32 arch pgalloc.c
implementation to fix the undefined reference to pgtable_page_ctor() and
pgtable_page_dtor().
Paul Turner [Sat, 22 Jan 2011 04:45:02 +0000 (20:45 -0800)]
sched: Use rq->clock_task instead of rq->clock for correctly maintaining load averages
The delta in clock_task is a more fair attribution of how much time a tg has
been contributing load to the current cpu.
While not really important it also means we're more in sync (by magnitude)
with respect to periodic updates (since __update_curr deltas are clock_task
based).
Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110122044852.007092349@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Turner [Sat, 22 Jan 2011 04:45:00 +0000 (20:45 -0800)]
sched: Fix/remove redundant cfs_rq checks
Since updates are against an entity's queuing cfs_rq it's not possible to
enter update_cfs_{shares,load} with a NULL cfs_rq. (Indeed, update_cfs_load
would crash prior to the check if we did anyway since we load is examined
during the initializers).
Also, in the update_cfs_load case there's no point
in maintaining averages for rq->cfs_rq since we don't perform shares
distribution at that level -- NULL check is replaced accordingly.
Thanks to Dan Carpenter for pointing out the deference before NULL check.
Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110122044851.825284940@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Turner [Sat, 22 Jan 2011 04:44:59 +0000 (20:44 -0800)]
sched: Fix sign under-flows in wake_affine
While care is taken around the zero-point in effective_load to not exceed
the instantaneous rq->weight, it's still possible (e.g. using wake_idx != 0)
for (load + effective_load) to underflow.
In this case the comparing the unsigned values can result in incorrect balanced
decisions.
Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110122044851.734245014@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dave Airlie [Wed, 26 Jan 2011 07:12:42 +0000 (17:12 +1000)]
Merge branch 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/grctx: correct an off-by-one
drm/nv50: Fix race with PFIFO during PGRAPH context destruction.
drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.
drm/nvc0: implement irq handler for whatever's at 0x14xxxx
drm/nvc0: fix incorrect TPC register setup
drm/nouveau: probe for adt7473 before f75375
drm/nouveau: remove dead function definition
Sonic Zhang [Wed, 12 Jan 2011 03:39:35 +0000 (22:39 -0500)]
mmc: bfin_sdh: fix alloc size for private data
The bfin_sdh driver allocates the wrong size for the private data
in the mmc_host. The first parameter of mmc_alloc_host should be
the size of the local driver struct rather than the common mmc_host.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
Jaehoon Chung [Wed, 12 Jan 2011 02:59:12 +0000 (11:59 +0900)]
mmc: sdhci-s3c: add platform_8bit_width() hook
We have 8-bit width support but is not a v3 controller.
So we need platform_8bit_width() to support 8-bit buswidth.
Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata.
This gets 8-bit support working again on s3c, after we previously
disabled 8-bit by default on non-v3 controllers.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Jamie Iles [Tue, 11 Jan 2011 12:43:50 +0000 (12:43 +0000)]
mmc: jz4740: don't treat NULL clk as an error
clk_get() returns a struct clk cookie to the driver and some platforms
may return NULL if they only support a single clock. clk_get() has only
failed if it returns a ERR_PTR() encoded pointer.
Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: mmci: don't read command response when invalid
Don't read the command response from the registers when either the
command timed out (because there was no response from the card) or
the checksum on the response was invalid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
Torben Hohn [Tue, 25 Jan 2011 23:07:35 +0000 (15:07 -0800)]
console: rename acquire/release_console_sem() to console_lock/unlock()
The -rt patches change the console_semaphore to console_mutex. As a
result, a quite large chunk of the patches changes all
acquire/release_console_sem() to acquire/release_console_mutex()
This commit makes things use more neutral function names which dont make
implications about the underlying lock.
The only real change is the return value of console_trylock which is
inverted from try_acquire_console_sem()
This patch also paves the way to switching console_sem from a semaphore to
a mutex.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Tue, 25 Jan 2011 23:07:34 +0000 (15:07 -0800)]
squashfs: fix use of uninitialised variable in zlib & xz decompressors
Fix potential use of uninitialised variable caused by recent
decompressor code optimisations.
In zlib_uncompress (zlib_wrapper.c) we have
int zlib_err, zlib_init = 0;
...
do {
...
if (avail == 0) {
offset = 0;
put_bh(bh[k++]);
continue;
}
...
zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
...
} while (zlib_err == Z_OK);
If continue is executed (avail == 0) then the while condition will be
evaluated testing zlib_err, which is uninitialised first time around the
loop.
Fix this by getting rid of the 'if (avail == 0)' condition test, this
edge condition should not be being handled in the decompressor code, and
instead handle it generically in the caller code.
Similarly for xz_wrapper.c.
Incidentally, on most architectures (bar Mips and Parisc), no
uninitialised variable warning is generated by gcc, this is because the
while condition test on continue is optimised out and not performed
(when executing continue zlib_err has not been changed since entering
the loop, and logically if the while condition was true previously, then
it's still true).
radix_tree_range_tag_if_tagged() always tags the root tag with settag
if the root tag is set with iftag even if there are no iftag tags
in the specified range (Of course, there are some iftag tags
outside the specified range).
__lookup_tag():
- Return with 0.
- Return with the index which is not bigger than the old one as the
input parameter.
Therefore the following "while" repeats forever because the above
conditions cause "ret" not to be updated and the cur_index cannot be
changed into the bigger one.
radix_tree_gang_lookup_tag_slot():
1178 while (ret < max_items) {
1179 unsigned int slots_found;
1180 unsigned long next_index; /* Index of next search */
1181
1182 if (cur_index > max_index)
1183 break;
1184 slots_found = __lookup_tag(node, results + ret,
1185 cur_index, max_items - ret, &next_index,
tag);
1186 ret += slots_found;
// cannot update ret because slots_found == 0.
// so, this while loops forever.
1187 if (next_index == 0)
1188 break;
1189 cur_index = next_index;
1190 }
(2) Why does __lookup_tag() return with 0 and doesn't update the index?
Assuming the following:
- the one of the slot in radix_tree_node is NULL.
- the one of the tag which corresponds to the slot sets with
PAGECACHE_TAG_TOWRITE or other.
- In a certain height(!=0), the corresponding index is 0.
a) __lookup_tag() notices that the tag is set.
1005 static unsigned int
1006 __lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index,
1007 unsigned int max_items, unsigned long *next_index, unsigned int tag)
1008 {
1009 unsigned int nr_found = 0;
1010 unsigned int shift, height;
1011
1012 height = slot->height;
1013 if (height == 0)
1014 goto out;
1015 shift = (height-1) * RADIX_TREE_MAP_SHIFT;
1016
1017 while (height > 0) {
1018 unsigned long i = (index >> shift) & RADIX_TREE_MAP_MASK ;
1019
1020 for (;;) {
1021 if (tag_get(slot, tag, i))
1022 break;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* the index is not updated yet.
b) __lookup_tag() notices that the slot is NULL.
1023 index &= ~((1UL << shift) - 1);
1024 index += 1UL << shift;
1025 if (index == 0)
1026 goto out; /* 32-bit wraparound */
1027 i++;
1028 if (i == RADIX_TREE_MAP_SIZE)
1029 goto out;
1030 }
1031 height--;
1032 if (height == 0) { /* Bottom level: grab some items */
...
1055 }
1056 shift -= RADIX_TREE_MAP_SHIFT;
1057 slot = rcu_dereference_raw(slot->slots[i]);
1058 if (slot == NULL)
1059 break;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
c) __lookup_tag() doesn't update the index and return with 0.
Because radix_tree_range_tag_if_tagged() always sets the root tag with
PAGECACHE_TAG_TOWRITE if the root tag is set with PAGECACHE_TAG_DIRTY,
even if there is no tag which can be set with PAGECACHE_TAG_TOWRITE
in the specified range (from *first_indexp to last_index). Of course,
some PAGECACHE_TAG_DIRTY nodes must exist outside the specified range.
(radix_tree_range_tag_if_tagged() is called only from tag_pages_for_writeback())
640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root
*root,
641 unsigned long *first_indexp, unsigned long last_index,
642 unsigned long nr_to_tag,
643 unsigned int iftag, unsigned int settag)
644 {
645 unsigned int height = root->height;
646 struct radix_tree_path path[height];
647 struct radix_tree_path *pathp = path;
648 struct radix_tree_node *slot;
649 unsigned int shift;
650 unsigned long tagged = 0;
651 unsigned long index = *first_indexp;
652
653 last_index = min(last_index, radix_tree_maxindex(height));
654 if (index > last_index)
655 return 0;
656 if (!nr_to_tag)
657 return 0;
658 if (!root_tag_get(root, iftag)) {
659 *first_indexp = last_index + 1;
660 return 0;
661 }
662 if (height == 0) {
663 *first_indexp = last_index + 1;
664 root_tag_set(root, settag);
665 return 1;
666 }
...
733 root_tag_set(root, settag);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
734 *first_indexp = index;
735
736 return tagged;
737 }
As the result, there is no radix_tree_node which is set with
PAGECACHE_TAG_TOWRITE but the root tag(radix_tree_root) is set with
PAGECACHE_TAG_TOWRITE.
[figure: inside radix_tree]
(Please see the figure with typewriter font)
===========================================
[roottag = DIRTY]
| tag=0:NOTHING
tag[0 0 0 1] 1:DIRTY
[x x x +] 2:WRITEBACK
| 3:DIRTY,WRITEBACK
p 4:TOWRITE
<---> 5:DIRTY,TOWRITE ...
specified range (index: 0 to 2)
* There is no DIRTY tag within the specified range.
(But there is a DIRTY tag outside that range.)
| | | | | | | | |
after calling tag_pages_for_writeback()
| | | | | | | | |
v v v v v v v v v
[roottag = DIRTY,TOWRITE]
| p is "page".
tag[0 0 0 1] x is NULL.
[x x x +] +- is a pointer to "page".
|
p
* But TOWRITE tag is set on the root tag.
============================================
After that, radix_tree_extend() via radix_tree_insert() is called
when the page is added.
This function sets the new radix_tree_node with PAGECACHE_TAG_TOWRITE
to succeed the status of the root tag.
246 static int radix_tree_extend(struct radix_tree_root *root, unsigned long
index)
247 {
248 struct radix_tree_node *node;
249 unsigned int height;
250 int tag;
251
252 /* Figure out what the height should be. */
253 height = root->height + 1;
254 while (index > radix_tree_maxindex(height))
255 height++;
256
257 if (root->rnode == NULL) {
258 root->height = height;
259 goto out;
260 }
261
262 do {
263 unsigned int newheight;
264 if (!(node = radix_tree_node_alloc(root)))
265 return -ENOMEM;
266
267 /* Increase the height. */
268 node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
269
270 /* Propagate the aggregated tag info into the new root */
271 for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
272 if (root_tag_get(root, tag))
273 tag_set(node, tag, 0);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
274 }
===========================================
[roottag = DIRTY,TOWRITE]
| :
tag[0 0 0 1] [0 0 0 0]
[x x x +] [+ x x x]
| |
p p (new page)
| | | | | | | | |
after calling radix_tree_insert
| | | | | | | | |
v v v v v v v v v
[roottag = DIRTY,TOWRITE]
|
tag [5 0 0 0] * DIRTY and TOWRITE tags are
[+ + x x] succeeded to the new node.
| |
tag [0 0 0 1] [0 0 0 0]
[x x x +] [+ x x x]
| |
p p
============================================
After that, the index 3 page is released by remove_from_page_cache().
Then we can make the situation that the tag is set with PAGECACHE_TAG_TOWRITE
and that the slot which corresponds to the tag is NULL.
===========================================
[roottag = DIRTY,TOWRITE]
|
tag [5 0 0 0]
[+ + x x]
| |
tag [0 0 0 1] [0 0 0 0]
[x x x +] [+ x x x]
| |
p p
(remove)
| | | | | | | | |
after calling remove_page_cache
| | | | | | | | |
v v v v v v v v v
[roottag = DIRTY,TOWRITE]
|
tag [4 0 0 0] * Only DIRTY tag is cleared
[x + x x] because no TOWRITE tag is existed
| in the bottom node.
[0 0 0 0]
[+ x x x]
|
p
============================================
To solve this problem
Change to that radix_tree_tag_if_tagged() doesn't tag the root tag
if it doesn't set any tags within the specified range.
Like this.
============================================
640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root
*root,
641 unsigned long *first_indexp, unsigned long last_index,
642 unsigned long nr_to_tag,
643 unsigned int iftag, unsigned int settag)
644 {
650 unsigned long tagged = 0;
...
733 if (tagged)
^^^^^^^^^^^^^^^^^^^^^^^^
734 root_tag_set(root, settag);
735 *first_indexp = index;
736
737 return tagged;
738 }
============================================
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
setup_irq() was called before clockevents_register_device() which is
needed by the irq handler. Bug was reproducible by restarting the
kernel using kexec (reliable crash).
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg: fix race at move_parent around compound_order()
A fix up mem_cgroup_move_parent() which use compound_order() in
asynchronous manner. This compound_order() may return unknown value
because we don't take lock. Use PageTransHuge() and HPAGE_SIZE instead
of it.
Also clean up for mem_cgroup_move_parent().
- remove unnecessary initialization of local variable.
- rename charge_size -> page_size
- remove unnecessary (wrong) comment.
- added a comment about THP.
Note:
Current design take compound_page_lock() in caller of move_account().
This should be revisited when we implement direct move_task of hugepage
without splitting.
Minchan Kim [Tue, 25 Jan 2011 23:07:26 +0000 (15:07 -0800)]
mm: migration: clarify migrate_pages() comment
Callers of migrate_pages should putback_lru_pages to return pages
isolated to LRU or free list. Now comment is rather confusing. It says
caller always have to call it.
It is more clear to point out that the caller has to call it if
migrate_pages's return value isn't zero.
Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Tue, 25 Jan 2011 23:07:25 +0000 (15:07 -0800)]
mm: compaction: don't depend on HUGETLB_PAGE
Commit 5d6892407 ("thp: select CONFIG_COMPACTION if TRANSPARENT_HUGEPAGE
enabled") causes this warning during the configuration process:
warning: (TRANSPARENT_HUGEPAGE) selects COMPACTION which has unmet
direct dependencies (EXPERIMENTAL && HUGETLB_PAGE && MMU)
COMPACTION doesn't depend on HUGETLB_PAGE, it doesn't depend on THP
either, it is also useful for regular alloc_pages(order > 0) including
the very kernel stack during fork (THREAD_ORDER = 1). It's always
better to enable COMPACTION.
The warning should be an error because we would end up with MIGRATION
not selected, and COMPACTION wouldn't work without migration (despite it
seems to build with an inline migrate_pages returning -ENOSYS).
I'd also like to remove EXPERIMENTAL: compaction has been in the kernel
for some releases (for full safety the default remains disabled which I
think is enough).
Jesper Juhl [Tue, 25 Jan 2011 23:07:24 +0000 (15:07 -0800)]
mm/memcontrol.c: fix uninitialized variable use in mem_cgroup_move_parent()
In mm/memcontrol.c::mem_cgroup_move_parent() there's a path that jumps
to the 'put_back' label
ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, charge);
if (ret || !parent)
goto put_back;
where we'll
if (charge > PAGE_SIZE)
compound_unlock_irqrestore(page, flags);
but, we have not assigned anything to 'flags' at this point, nor have we
called 'compound_lock_irqsave()' (which is what sets 'flags'). The
'put_back' label should be moved below the call to
compound_unlock_irqrestore() as per this patch.
David Rientjes [Tue, 25 Jan 2011 23:07:23 +0000 (15:07 -0800)]
mm: clear pages_scanned only if draining a pcp adds pages to the buddy allocator
Commit 0e093d99763e ("writeback: do not sleep on the congestion queue if
there are no congested BDIs or if significant congestion is not being
encountered in the current zone") uncovered a livelock in the page
allocator that resulted in tasks infinitely looping trying to find
memory and kswapd running at 100% cpu.
The issue occurs because drain_all_pages() is called immediately
following direct reclaim when no memory is freed and try_to_free_pages()
returns non-zero because all zones in the zonelist do not have their
all_unreclaimable flag set.
When draining the per-cpu pagesets back to the buddy allocator for each
zone, the zone->pages_scanned counter is cleared to avoid erroneously
setting zone->all_unreclaimable later. The problem is that no pages may
actually be drained and, thus, the unreclaimable logic never fails
direct reclaim so the oom killer may be invoked.
This apparently only manifested after wait_iff_congested() was
introduced and the zone was full of anonymous memory that would not
congest the backing store. The page allocator would infinitely loop if
there were no other tasks waiting to be scheduled and clear
zone->pages_scanned because of drain_all_pages() as the result of this
change before kswapd could scan enough pages to trigger the reclaim
logic. Additionally, with every loop of the page allocator and in the
reclaim path, kswapd would be kicked and would end up running at 100%
cpu. In this scenario, current and kswapd are all running continuously
with kswapd incrementing zone->pages_scanned and current clearing it.
The problem is even more pronounced when current swaps some of its
memory to swap cache and the reclaimable logic then considers all active
anonymous memory in the all_unreclaimable logic, which requires a much
higher zone->pages_scanned value for try_to_free_pages() to return zero
that is never attainable in this scenario.
Before wait_iff_congested(), the page allocator would incur an
unconditional timeout and allow kswapd to elevate zone->pages_scanned to
a level that the oom killer would be called the next time it loops.
The fix is to only attempt to drain pcp pages if there is actually a
quantity to be drained. The unconditional clearing of
zone->pages_scanned in free_pcppages_bulk() need not be changed since
other callers already ensure that draining will occur. This patch
ensures that free_pcppages_bulk() will actually free memory before
calling into it from drain_all_pages() so zone->pages_scanned is only
cleared if appropriate.
Signed-off-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Tue, 25 Jan 2011 23:07:20 +0000 (15:07 -0800)]
mm: fix deferred congestion timeout if preferred zone is not allowed
Before 0e093d99763e ("writeback: do not sleep on the congestion queue if
there are no congested BDIs or if significant congestion is not being
encountered in the current zone"), preferred_zone was only used for NUMA
statistics, to determine the zoneidx from which to allocate from given
the type requested, and whether to utilize memory compaction.
wait_iff_congested(), though, uses preferred_zone to determine if the
congestion wait should be deferred because its dirty pages are backed by
a congested bdi. This incorrectly defers the timeout and busy loops in
the page allocator with various cond_resched() calls if preferred_zone
is not allowed in the current context, usually consuming 100% of a cpu.
This patch ensures preferred_zone is an allowed zone in the fastpath
depending on whether current is constrained by its cpuset or nodes in
its mempolicy (when the nodemask passed is non-NULL). This is correct
since the fastpath allocation always passes ALLOC_CPUSET when trying to
allocate memory. In the slowpath, this patch resets preferred_zone to
the first zone of the allowed type when the allocation is not
constrained by current's cpuset, i.e. it does not pass ALLOC_CPUSET.
This patch also ensures preferred_zone is from the set of allowed nodes
when called from within direct reclaim since allocations are always
constrained by cpusets in this context (it is blockable).
Both of these uses of cpuset_current_mems_allowed are protected by
get_mems_allowed().
Signed-off-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both pps_parport and pps_gen_parport are written in a way that they
can't share a port with any other driver. This can result in locking up
the process that loads modules or even the whole kernel if the modules
are compiled in. Use PARPORT_FLAG_EXCL to indicate this.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parport_unregister_device() should never be used when interrupts are
enabled in hardware and irq handler is registered so there is no need to
disable interrupts when using waitlist_lock. But there is no way to
explain this subtle semantics to lockdep analyzer.
So disable interrupts here too to simplify things. The price is
negligible.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Feng Tang [Tue, 25 Jan 2011 23:07:15 +0000 (15:07 -0800)]
langwell_gpio: modify EOI handling following change of kernel irq subsystem
Latest kernel has many changes in IRQ subsystem and its interfaces, like
adding "irq_eoi" for struct irq_chip, this patch is a follow up change
for that.
Also remove the unnecessary cast for a "void *".
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Lin [Tue, 25 Jan 2011 23:07:14 +0000 (15:07 -0800)]
leds: leds-pwm: return proper error if pwm_request failed
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 25 Jan 2011 23:07:11 +0000 (15:07 -0800)]
mm/pgtable-generic.c: fix CONFIG_SWAP=n build
mips (and sparc32):
In file included from arch/mips/include/asm/tlb.h:21,
from mm/pgtable-generic.c:9:
include/asm-generic/tlb.h: In function `tlb_flush_mmu':
include/asm-generic/tlb.h:76: error: implicit declaration of function `release_pages'
include/asm-generic/tlb.h: In function `tlb_remove_page':
include/asm-generic/tlb.h:105: error: implicit declaration of function `page_cache_release'
free_pages_and_swap_cache() and free_page_and_swap_cache() are macros
which call release_pages() and page_cache_release(). The obvious fix is
to include pagemap.h in swap.h, where those macros are defined. But that
breaks sparc for weird reasons.
So fix it within mm/pgtable-generic.c instead.
Reported-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Tue, 25 Jan 2011 23:07:09 +0000 (15:07 -0800)]
thp: fix PARAVIRT x86 32bit noPAE
This fixes TRANSPARENT_HUGEPAGE=y with PARAVIRT=y and HIGHMEM64=n.
The #ifdef that this patch removes was erratically introduced to fix a
build error for noPAE (where pmd.pmd doesn't exist). So then the kernel
built but it failed at runtime because set_pmd_at was a noop. This will
correct it by enabling set_pmd_at for noPAE mode too.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: werner <w.landgraf@ru.ru> Reported-by: Minchan Kim <minchan.kim@gmail.com> Tested-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 25 Jan 2011 23:04:18 +0000 (09:04 +1000)]
Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ALSA: AACI: fix timeout duration
ALSA: AACI: fix timeout condition checking
ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode
ARM: 6637/1: Make the argument to virt_to_phys() "const volatile"
ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode
ARM: 6635/2: Configure reference clock for Versatile Express timers
ARM: versatile: name configuration options after actual board names
ARM: realview: name configuration options after actual board names
ARM: realview,vexpress: fix section mismatch warning for pen_release
ARM: 6632/3: mmci: stop using the blockend interrupts
Linus Torvalds [Tue, 25 Jan 2011 23:00:17 +0000 (09:00 +1000)]
Merge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix build of sh7750 base boards
sh: update INTC to clear IRQ sense valid flag
sh: Fix sh build failure when CONFIG_SFC=m
sh: fix MSIOF0 SPI on ecovec: it conflicts with VOU
sh: support XZ-compressed kernel.
sh: Fix up breakage from asm-generic/pgtable.h changes.
David Howells [Tue, 25 Jan 2011 16:34:28 +0000 (16:34 +0000)]
KEYS: Fix __key_link_end() quota fixup on error
Fix __key_link_end()'s attempt to fix up the quota if an error occurs.
There are two erroneous cases: Firstly, we always decrease the quota if
the preallocated replacement keyring needs cleaning up, irrespective of
whether or not we should (we may have replaced a pointer rather than
adding another pointer).
Secondly, we never clean up the quota if we added a pointer without the
keyring storage being extended (we allocate multiple pointers at a time,
even if we're not going to use them all immediately).
We handle this by setting the bottom bit of the preallocation pointer in
__key_link_begin() to indicate that the quota needs fixing up, which is
then passed to __key_link() (which clears the whole thing) and
__key_link_end().
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Lin [Tue, 25 Jan 2011 14:12:12 +0000 (14:12 +0000)]
intel_scu_ipc: fix signedness bug
busy_loop() returns negative error code, thus change err variable
from u32 to int to properly propagate correct error code.
Also remove unneeded initialization for err and i variables.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jerry Chu [Tue, 25 Jan 2011 21:46:30 +0000 (13:46 -0800)]
TCP: fix a bug that triggers large number of TCP RST by mistake
This patch fixes a bug that causes TCP RST packets to be generated
on otherwise correctly behaved applications, e.g., no unread data
on close,..., etc. To trigger the bug, at least two conditions must
be met:
1. The FIN flag is set on the last data packet, i.e., it's not on a
separate, FIN only packet.
2. The size of the last data chunk on the receive side matches
exactly with the size of buffer posted by the receiver, and the
receiver closes the socket without any further read attempt.
This bug was first noticed on our netperf based testbed for our IW10
proposal to IETF where a large number of RST packets were observed.
netperf's read side code meets the condition 2 above 100%.
Before the fix, tcp_data_queue() will queue the last skb that meets
condition 1 to sk_receive_queue even though it has fully copied out
(skb_copy_datagram_iovec()) the data. Then if condition 2 is also met,
tcp_recvmsg() often returns all the copied out data successfully
without actually consuming the skb, due to a check
"if ((chunk = len - tp->ucopy.len) != 0) {"
and
"len -= chunk;"
after tcp_prequeue_process() that causes "len" to become 0 and an
early exit from the big while loop.
I don't see any reason not to free the skb whose data have been fully
consumed in tcp_data_queue(), regardless of the FIN flag. We won't
get there if MSG_PEEK is on. Am I missing some arcane cases related
to urgent data?
Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reinette Chatre [Tue, 25 Jan 2011 16:38:06 +0000 (08:38 -0800)]
MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 24 Jan 2011 18:28:49 +0000 (19:28 +0100)]
mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
Some drivers (e.g. ath9k) do not always disable beacons when they're
supposed to. When an interface is changed using the change_interface op,
the mode specific sdata part is in an undefined state and trying to
get a beacon at this point can produce weird crashes.
To fix this, add a check for ieee80211_sdata_running before using
anything from the sdata.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
Russell King [Wed, 12 Jan 2011 23:42:57 +0000 (23:42 +0000)]
ALSA: AACI: fix timeout duration
Relying on the access time of peripherals is unreliable - it depends
on the speed of the CPU and the bus. On Versatile Express, these
timeouts were expiring, causing the driver to fail.
Add udelay(1) to ensure that they don't expire early, and adjust
timeouts to give a reasonable margin over the response times.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 12 Jan 2011 23:17:24 +0000 (23:17 +0000)]
ALSA: AACI: fix timeout condition checking
Ensure that a timeout coincident with the condition being waited for
results in success rather than failure. This helps avoid timeout
conditions being inappropriately flagged.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Tue, 25 Jan 2011 00:05:35 +0000 (01:05 +0100)]
ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode
The EP93xx C and D GPIO ports are multiplexed with the Keypad Interface
peripheral. At power-up they default into non-GPIO mode with the Key
Matrix controller enabled so these ports are unusable for GPIO. Note
that the Keypad Interface peripheral is only available in the EP9307,
EP9312, and EP9315 processor variants.
The keypad support will clear the DeviceConfig bits appropriately to
enable the Keypad Interface when the driver is loaded. And, when the
driver is unloaded it will set the bits to return the ports to GPIO mode.
To make these ports available for GPIO after power-up on all EP93xx
processor variants, set the KEYS and GONK bits in the DeviceConfig
register.
Similarly, the E, G, and H ports are multiplexed with the IDE Interface
peripheral. At power-up these also default into non-GPIO mode. Note
that the IDE peripheral is only available in the EP9312 and EP9315
processor variants.
Since an IDE driver is not even available in mainline, set the EONIDE,
GONIDE, and HONIDE bits in the DeviceConfig register so that these
ports will be available for GPIO use after power-up.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 25 Jan 2011 10:35:36 +0000 (10:35 +0000)]
ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode
Ensure that the twd timer reload value is reprogrammed each time we
enter periodic mode. This ensures that the reload value is always
reset correctly.
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
because the core semantic change to ipv6 address handling on ifdown
has broken some things, in particular "disable_ipv6" sysctl handling.
Stephen has made several attempts to get things back in working order,
but nothing has restored disable_ipv6 fully yet.
Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Stern [Tue, 25 Jan 2011 19:50:07 +0000 (20:50 +0100)]
PM / Runtime: Don't enable interrupts while running in_interrupt
This patch (as1445) fixes a bug in the runtime PM core left over from
the addition of the no_callbacks flag. If this flag is set then it is
possible for rpm_suspend() to be called in_interrupt, so when
releasing spinlocks it's important not to re-enable interrupts.
To avoid an unnecessary save-and-restore of the interrupt flag, the
patch also inlines a pm_request_idle() call.
This fixes Bugzilla #27482.
(The offending code was added in 2.6.37, so it's not necessary to apply
this to any earlier stable kernels.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: tim blechmann <tim@klingt.org> CC: <stable@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Pawel Moll [Tue, 25 Jan 2011 14:53:03 +0000 (15:53 +0100)]
ARM: 6635/2: Configure reference clock for Versatile Express timers
Timers on Versatile Express mainboard are used as system clock/event
sources. Driver assumes that they are clocked with 1MHz signal.
Old V2M firmware apparently configured it by default, but on newer
boards one can observe that "sleep 1" command takes over 30 seconds
to finish, as the timers are fed with 32kHz instead...
This patch performs required magic and also removes code clearing
timer's control registers, as exactly the same operations are
performed by the timer driver few jiffies later.
Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Sage Weil [Sat, 22 Jan 2011 05:16:46 +0000 (21:16 -0800)]
ceph: avoid picking MDS that is not active
Ignore replication or auth frag data if it indicates an MDS that is not
active. This can happen if the MDS shuts down and the client has stale
data about the namespace distribution across the MDS cluster. If that's
the case, fall back to directing the request based on the auth cap (which
should always be accurate).
Russell King [Mon, 24 Jan 2011 12:00:01 +0000 (12:00 +0000)]
ARM: versatile: name configuration options after actual board names
Update the option text to those which appear on the front of the
appropriate board user guides. This gives consistent board naming, and
makes it obvious which option is for which platform.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 24 Jan 2011 10:58:24 +0000 (10:58 +0000)]
ARM: realview: name configuration options after actual board names
As no one seems to really know which configuration options tie up with
which boards, I thought I'd do some investigation and try to work it
out. After discussion with some folk in linaro, I think I have this
nailed.
The names are updated to use the name on the front of the appropriate
board user guide for the various baseboards, which I've taken to be
the official name for each board.
I haven't significantly updated the descriptions for the tiles as that
is even less clear - as far as I can see on ARMs website, there is no
Cortex-A9 tile for Realview EB - only ARM11MPCore, ARM1156T2F-S,
ARM1176TZF-S and Cortex-R4F. So exactly what this 'Multicore Cortex-A9
Tile' is...
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 22 Jan 2011 17:22:34 +0000 (17:22 +0000)]
ARM: realview,vexpress: fix section mismatch warning for pen_release
Fix two section mismatch warnings in the platform SMP bringup code for
Realview and Versatile Express:
WARNING: arch/arm/mach-realview/built-in.o(.text+0x8ac): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release
The function write_pen_release() references
the variable __cpuinitdata pen_release.
This is often because write_pen_release lacks a __cpuinitdata
annotation or the annotation of pen_release is wrong.
WARNING: arch/arm/mach-vexpress/built-in.o(.text+0x7b4): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release
The function write_pen_release() references
the variable __cpuinitdata pen_release.
This is often because write_pen_release lacks a __cpuinitdata
annotation or the annotation of pen_release is wrong.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
textsearch: doc - fix spelling in lib/textsearch.c.
Found the following spelling errors while reading the textsearch code:
"facitilies" -> "facilities"
"continously" -> "continuously"
"arbitary" -> "arbitrary"
"patern" -> "pattern"
"occurences" -> "occurrences"
I'll try to push this patch through DaveM, given the only users
of textsearch is in the net/ tree (nf_conntrack_amanda.c, xt_string.c
and em_text.c)
Signed-off-by: Jesper Sander <sander.contrib@gmail.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 23 Jan 2011 12:19:55 +0000 (12:19 +0000)]
USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
We will leak the storage allocated by request_firmware() if the size of
the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE.
This removes the leak by calling release_firmware() before we return
-ENOSPC.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 24 Jan 2011 12:59:02 +0000 (12:59 +0000)]
bnx2: Always set ETH_FLAG_TXVLAN
TSO does not work if the VLAN tag is in the packet (non-accelerated).
We may be able to remove this restriction in future firmware.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log