staging: comedi: do extra checks for becoming non-busy for "read"

`comedi_read()` is the handler for the "read" file operation for COMEDI
devices.  It mostly runs without using the main mutex of the COMEDI
device, but uses the `attach_lock` rwsemaphore to protect against the
COMEDI device becoming "detached".  A file object can read data
resulting from a COMEDI asynchonous command if it initiated the command.
The COMEDI subdevice is marked as busy when the command is started.  At
some point, the "read" handler detects that the command has terminated
and all available data has been read and so marks the subdevice as
non-busy.

In order to mark the subdevice as non-busy, the "read" handler needs to
release the `attach_lock` rwsemaphore and `acquire the main `mutex`.
There is a vulnerable point between the two, so it checks that the
device is still attached after acquiring the mutex.  However, it does
not currently check that the conditions for becoming non-busy still
hold.  Add some more checks that the subdevice is still busy with a
command initiated by the same file object, that command is in the correct
direction (in case the subdevice supports both "read" and "write"), that
command has terminated, and has no data available to be read.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't consider "unmunged" data when becoming non-busy

If an asynchronous "read" command is no longer running but the subdevice
is still busy, it becomes non-busy once there is no more data available
in the buffer.  Some or all of the data written to the buffer might not
have been "munged" yet, and it cannot be read until it has been munged
by the writer.  However, since the command is no longer running, we
cannot expect any remaining unmunged data to get munged so we should
ignore it.  Call `comedi_buf_read_n_available()` to check the amount of
munged data available to be read, replacing the call to
`comedi_buf_n_bytes_ready()` which checked the amount of written (but
possibly not yet munged) data available to be read.  This affects both
the "read" file operation (done in `comedi_read()`) and the
`COMEDI_BUFINFO` ioctl handling (done in `do_bufinfo_ioctl()`).  (The
latter is used when data is transferred directly through the mmapped
buffer instead of via the "read" file operation.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remain busy until read end-of-file

If a COMEDI subdevice is busy handling an asynchronous command in the
"read" direction, then after the command has terminated itself, the
"read" file operation handler, `comedi_read()` should keep the subdevice
busy until all available data has been read and it has returned 0 to
indicate an "end-of-file" condition.  Currently, it has a bug where it
can mark the subdevice as non-busy even when returning a non-zero count.
The bug is slightly hidden because the next "read" will return 0 because
the subdevice is no longer busy.  Fix it by checking the return count is
0 before deciding to mark the subdevice as non-busy.

The call to `comedi_is_subdevice_idle()` is superfluous as the
`become_nonbusy` variable will have been set to `true` when considering
becoming non-busy.  Strictly speaking, checking the return count is
superfluous too, as `become_nonbusy` doesn't get set to `true` unless
the count is 0, but check the return count anyway to make the intention
clearer.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't use mutex when polling file

The main mutex in a comedi device can get held for quite a while when
processing comedi instructions, so for performance reasons, the "read"
and "write" file operations do not use it; they use use the
`attach_lock` rwsemaphore to protect against the comedi device becoming
detached at an inopportune moment.  Do the same for the "poll" file
operation.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: check command started by file being polled

Currently, the "poll" file operation checks if an asynchronous "read"
(or "write" command is active on the "read" (or "write" subdevice, but
does not consider whether the command was started from the file object
being polled.  Since that is the only file object able to read (or
write) data, take it into consideration.

With this change, if no read (or write) command is running on the
subdevice, or it is started by a different file object, the file object
is marked as readable (or writeable) regardless, but the read (or write)
file operation will return an error.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't allocate buffer space when polling for write

When handling the "poll" file operation and checking for `POLLOUT`,
don't allocate space from the buffer for writing, just check that space
is available for writing.  That check is done after checking that an
asynchronous "write" command is running on the subdevice.  Allocating
the buffer space before checking a "write" command is running can cause
problems if the subdevice supports commands in either direction and
currently has an active "read" command.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add new comedi_buf_write_n_available()

Add a new function `comedi_buf_write_n_available()` to return the amount
of buffer space available for writing, including space already allocated
by `comedi_buf_write_alloc()` plus any unallocated space available.
This is currently just for internal use by the comedi core, so is not
exported.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rename comedi_buf_write_n_available

Rename the local function `comedi_buf_write_n_available()` to
`comedi_buf_write_n_unalloc()`.  It is the amount of unallocated space
available in the buffer that is available to be allocated for writing
and does not include the space that has already been allocated for
writing.  This is unlike the exported function
`comedi_buf_read_n_available()` which includes the space available to be
allocated for reading plus the space already allocated for reading.  The
new name breaks the unintentional naming symmetry (and also clears the
way for the old name to be reused for a new function).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't poll_wait on same subdevice twice

Comedi subdevices that support asynchronous acquisition commands have a
wait queue head used for blocking reads or writes and for the poll file
operation.  The comedi device may have several subdevices that support
"read" and/or "write" commands, but each open file object has at most
one "read" subdevice and one "write" subdevice.  It's possible (though
rare) for those to be the same subdevice if the subdevice supports
commands in either direction.  In that case, the "poll" file operation
doesn't really need to do a `poll_wait()` on the same subdevice twice.
Although harmless, it wastes a poll table entry.  Check for that, and
avoid it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: rename private data member 'status[12]'

For aesthetics, rename these private data members to match the registers
they are associated with.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: mode analog output comment

For aesthetics, move this comment to follow the format of the other
subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: the DAC16/16-AO only has 4 digital I/O

The PC-CARD DAS16/16-AO board only has 4 digital I/O channels. The other
boards supported by this driver have 8. Add the boardinfo to correctly
initialize the subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: hookup 8254 counter subdevice

The hardware has an 8254 counter/timer to provide a pacer clock using
counters 1 and 2. Counter 0 is available to the user.

Hook up the subdevice support to allow the user to use counter 0.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: tidy up analog input subdevice init

This driver currently code not support async commands. Remove the
SDF_CMD_READ subdev_flag and len_chanlist initialization from the
subdevice init.

For aesthetics, rename the (*insn_read) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: refactor 'n_ao_chans' boardinfo

Only one of the boards supported by this driver has analog outputs.
For aesthetics, change the 'n_ao_chans' member of the boardinfo into
a bit-field flag 'has_ao'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: define the misc1 and misc2 register bits

Define the bits in these registers and use them to remove the "magic"
values in the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: fix ai mux register programming

The ai mux register is used program the hi/lo channels in a scan.
According to the user manual, the hi and lo channels should be
the same  to sample one channel.

Introduce some macros to set the appropriate bits in the ai mux
register and fix the ai (*insn_read).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: rename register map defines

For aesthetics, add _REG to all the register map offsets and convert
the values to hex.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: tidy up multi-line comments

Reformat the multi-line comments in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: tidy up digital I/O subdevice init

For aesthetics, move and reword the comment to follow the format of
the other subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
CC: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: rename 'aio_ao12_8' boardinfo

This board name is incorrect. The proper name is 104-AO12-4.

Change the boardinfo name to 'aio_aio12_4' to follow the format of
the other boardtypes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: refactor boardininfo

This driver supports three board types with these differences:
  104-AIO12-8 - eight 12-bit analog in, four 12-bit analog out
  104-AI12-8  - eight 12-bit analog in
  104-AO12-4  - four 12-bit analog out

Convert the boardinfo 'ai_nchan' and 'ao_nchan' into bit-field
flags 'has_ai' and 'has_ao' so save a bit of space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: fix ai (*insn_read)

According to the user manual, analog input bipolar data is 2's
complement and unipolar is straight binry. Use the core helpers
to munge the data appropriately.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: analog outputs are single-ended

The analog outputs are all single-ended. Remove the SDF_DIFF
subdev_flag from the subdevice initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: move comedi_lrange definition

For aesthetics, move the comedi_lrange definition used in this driver
to the follow the norm in comedi drivers and rename the variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: hookup 8254 counter/timer

This board has an industry-standard 8254 chip with the gate, clock,
and output pins for each counter available on the connector.

Hookup the 8254 counter as a comedi subdevice.

Provice an (*insn_config) for the user to query the clock source
for each channel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: update MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: tidy up multi-line comments

Reformat the multi-line comments in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: prefer using the BIT macro

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename private data member 'ai_et_MuxVal'

Rename thie CamelCase member of the private data. Add a comment in
the interrupt handler to clarify why the channel interval is updated
again.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up PCI1720_* register defines

The PCI-1720 board is supported by this driver but uses a different
register map. For aesthetics, rename the defines to match the
PCI171X_* format.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up remaining PCI171x_* registers

Rename these CamelCase defines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up control register and bits

Rename the CamelCase and use the BIT macro to define the bits.
Also, rename the associated CamelCase members of the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up status register and bits

Rename the CamelCase and use the BIT macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up multi-line comments

Reformat the multi-line comments in the kernel CodingStyle. And
refactor them to follow the normal format for comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: fix alignment issue

Use a local variable for the 'devpriv->ai_bounce_buffer' to shorten
the lines in pci9111_handle_fifo_half_full() and gix the checkpath.pl
issue about:

CHECK: Alignment should match open parenthesis

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: rename CamelCase parameters

Rename the CamelCase parameters of plx9050_interrupt_control().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: tidy up multi-line comments

Reformat the multi-line comments in the kernel CodingStyle.

Remove the unnecessary CHANGELOG information, git provided this
better.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: define a macro for the ai range bits

For aesthetics, define a macro to set the analog input range bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: prefer using the BIT macro

As suggested by checkpatch.pl, use the BIT macro to define the
register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: add a blank line after function/struct/union/enum declarations

Fixes checkpatch.pl CHECK:LINE_SPACING: Please use a blank line after
function/struct/union/enum declarations

The patch is generated using checkpatch.pl --fix-inplace:

for f in $(find drivers/staging/lustre/ -type f) ; do
    ./scripts/checkpatch.pl --types "LINE_SPACING" --fix-inplace -f $f
done

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove multiple blank lines

Fixes checkpatch.pl CHECK:LINE_SPACING: Please don't use multiple blank
lines.

The patch is generated using checkpatch.pl --fix-inplace:

for f in $(find drivers/staging/lustre/ -type f) ; do
    ./scripts/checkpatch.pl --types "LINE_SPACING" --test-only=multiple \
    --fix-inplace  -f $f
done

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: add missing blank line after declarations

Fixes checkpatch.pl WARNING:LINE_SPACING: Missing a blank line after
declarations.
The patch is generated using checkpatch.pl --fix-inplace:

for f in $(find drivers/staging/lustre/ -type f) ; do
    ./scripts/checkpatch.pl --types "LINE_SPACING" --test-only=Missing \
    --fix-inplace -f $f
done

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Use snprintf instead rsprintf

Macro rsprintf is useless, remove it and use existing function
snprintf instead.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: dt9812: Use mutex instead of semaphore

Replace binary semaphore with mutex. Mutex also gives better performance
than semaphore.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lov: Remove unused #include header file

Remove lclient.h header since it is not used.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Remove exceptional & on function name

In this file, function names are otherwise used as pointers without &.

A simplified version of the Coccinelle semantic patch that makes this
change is as follows:

// <smpl>
@r@
identifier f;
@@

f(...) { ... }
@@
identifier r.f;
@@

- &f
+ f
// </smpl>

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Remove exceptional & on function name

In this file, function names are otherwise used as pointers without &.

A simplified version of the Coccinelle semantic patch that makes this
change is as follows:

// <smpl>
@r@
identifier f;
@@

f(...) { ... }
@@
identifier r.f;
@@

- &f
+ f
// </smpl>

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Remove exceptional & on function name

n this file, function names are otherwise used as pointers without &.

A simplified version of the Coccinelle semantic patch that makes this
change is as follows:

// <smpl>
@r@
identifier f;
@@

f(...) { ... }
@@
identifier r.f;
@@

- &f
+ f
// </smpl>

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: Remove useless cast on void pointer

The semantic patch used to find this is:

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: Remove useless cast on void pointer

The semantic patch used to find this is:

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: wilc_wlan: Remove unnecessary cast

Remove cast which is not required.
Semantic patch used:
@@
type T;
T e;
identifier x;
@@

* T x = (T)e;

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: wilc_wfi_cfgoperations: Remove unused code

Remove the declaration, initialization and statement having a
variable that is not used anywhere in the code.
Semantic patch used:

@@
type T;
identifier i;
constant C;
position p != e.p;
@@

- T i@p;
  <+... when != i
- i = C;
  ...+>

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Length of struct rcvd_net_info

This patch renames u32Length of struct rcvd_net_info to len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Buffer of struct rcvd_net_info

This patch renames pu8Buffer of struct rcvd_net_info to buffer to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8IPAddr of struct set_ip_addr

This patch renames au8IPAddr of struct set_ip_addr to ip_addr to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Timeout of struct power_mgmt_param

This patch renames u32Timeout of struct power_mgmt_param to timeout to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename bIsEnabled of struct power_mgmt_param

This patch renames bIsEnabled of struct power_mgmt_param to enabled to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8MacAddr of struct del_sta

This patch renames au8MacAddr of struct del_sta to mac_addr to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32count of struct set_multicast

This patch renames u32count of struct set_multicast to cnt to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename bIsEnabled of struct set_multicast

This patch renames bIsEnabled of struct set_multicast to enabled to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Num_AssocSta of struct del_all_sta

This patch renames u8Num_AssocSta of struct del_all_sta to assoc_sta to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8Sta_DelAllSta of struct del_all_sta

This patch renames au8Sta_DelAllSta of struct del_all_sta to del_all_sta to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Tail of struct beacon_attr

This patch renames pu8Tail of struct beacon_attr to tail to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32TailLen of struct beacon_attr

This patch renames u32TailLen of struct beacon_attr to tail_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Head of struct beacon_attr

This patch renames pu8Head of struct beacon_attr to head to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32HeadLen of struct beacon_attr

This patch renames u32HeadLen of struct beacon_attr to head_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32DTIMPeriod of struct beacon_attr

This patch renames u32DTIMPeriod of struct beacon_attr to dtim_period to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Interval of struct beacon_attr

This patch renames u32Interval of struct beacon_attr to interval to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8SetChan of struct channel_attr

This patch renames u8SetChan of struct channel_attr to set_ch to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Length of struct rcvd_async_info

This patch renames u32Length of struct rcvd_async_info to len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Buffer of struct rcvd_async_info

This patch renames pu8Buffer of struct rcvd_async_info to buffer to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pJoinParams of struct connect_attr

This patch renames pJoinParams of struct connect_attr to params to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8channel of struct connect_attr

This patch renames u8channel of struct connect_attr to ch to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename tenuAuth_type of struct connect_attr

This patch renames tenuAuth_type of struct connect_attr to auth_type to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvUserArg of struct connect_attr

This patch renames pvUserArg of struct connect_attr to arg to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pfConnectResult of struct connect_attr

This patch renames pfConnectResult of struct connect_attr to result to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8security of struct connect_attr

This patch renames u8security of struct connect_attr to security to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename IEsLen of struct connect_attr

This patch renames IEsLen of struct connect_attr to ies_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8IEs of struct connect_attr

This patch renames pu8IEs of struct connect_attr to ies to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename ssidLen of struct connect_attr

This patch renames ssidLen of struct connect_attr to ssid_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8ssid of struct connect_attr

This patch renames pu8ssid of struct connect_attr to ssid to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8bssid of struct connect_attr

This patch renames pu8bssid of struct connect_attr to bssid to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove duplicate copy routine

This patch remove the duplicate bssid copy routine.
Already ahead bssid copy routine execute.
Therefore do not necessary in this routine.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix "ERROR: do not initialise globals to 0 or NULL"

This patch fixes the checkpatch.pl error to host_interface.c.
 - ERROR: do not initialise globals to 0 or NULL

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strHiddenNetwork of struct scan_attr

This patch renames strHiddenNetwork of struct scan_attr to hidden_network to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvUserArg of struct scan_attr

This patch renames pvUserArg of struct scan_attr to arg to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pfScanResult of struct scan_attr

This patch renames pfScanResult of struct scan_attr to result to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename IEsLen of struct scan_attr

This patch renames IEsLen of struct scan_attr to ies_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8IEs of struct scan_attr

This patch renames pu8IEs of struct scan_attr to ies to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ChnlListLen of struct scan_attr

This patch renames u8ChnlListLen of struct scan_attr to ch_list_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8ChnlFreqList of struct scan_attr

This patch renames pu8ChnlFreqList of struct scan_attr to ch_freq_list to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove duplicate null check routine

This patch removes the duplicate null check routine. The same null check
routine is twice executed. Therefore the duplicated routine is not necessary.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ScanType of struct scan_attr

This patch renames u8ScanType of struct scan_attr to type to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ScanSource of struct scan_attr

This patch renames u8ScanSource of struct scan_attr to src to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Ciphermode of struct host_if_wpa_attr

This patch renames u8Ciphermode of struct host_if_wpa_attr to mode to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Keylen of struct host_if_wpa_attr

This patch renames u8Keylen of struct host_if_wpa_attr to key_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8keyidx of struct host_if_wpa_attr

This patch renames u8keyidx of struct host_if_wpa_attr to index to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8seqlen of struct host_if_wpa_attr

This patch renames u8seqlen of struct host_if_wpa_attr to seq_len to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8seq of struct host_if_wpa_attr

This patch renames pu8seq of struct host_if_wpa_attr to seq to
avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>