Fabio Estevam [Wed, 24 Oct 2012 23:36:46 +0000 (21:36 -0200)]
staging: ipu-v3: ipu-common: Make it less verbose
IPU Interrupt numbers and the various IPU submodules base addresses are
more interesting for debugging purposes rather than normal use, so use
dev_dbg instead.
Kees Cook [Tue, 23 Oct 2012 20:02:06 +0000 (13:02 -0700)]
drivers/iio/dac: remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Jonathan Cameron <jic23@cam.ac.uk> CC: Lars-Peter Clausen <lars@metafoo.de> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Michael Hennerich <michael.hennerich@analog.com> CC: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI chip used on this board is from PLX Technologies Inc. As stated
in the comments of this driver, Dynalog does not have a registered PCI
vendor id so this board uses the PLX vendor id. The kernel provides an
id for that vendor in pci_ids.h (PCI_VENDOR_ID_PLX). Use it instead of
creating a duplicate with a different name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the define used for the D/A Data register so that is has
namespace with this driver. Change the define so that it takes
the channel as a parameter to calculate the correct register
offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidda: cleanup the copyright and comedi comments
Reformat the copyright and driver description comments to follow the
preferred block comment style. Reword the driver description to follow
comedi style described in the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidda: cleanup the analog output range
All the boards supported by this driver have the same analog output
ranges. Remove the 'range' from the boardinfo and just use the
'cb_pcidda_ranges' directly when initializing the subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidda: check for subdev_8255_init() failure
The subdev_8255_init() can fail, make sure to check for it.
This board has two 8255 subdevices, one at iobase PCI bar2 and one
at iobase PCI bar2 + 4. Init the subdevices using a for() loop to
make the code a bit more concise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidda: remove private data variable 'digitalio'
The private data variable 'digitalio' is only used to hold the PCI
base address for the 8255 devices on the board. This value is then
passed to subdev_8255_init() and stored in it's own private data.
There is no need to keep the value in the private data for the board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidda: remove code in #if 0/#endif blocks
The functions cb_pcidda_ai_cmd(), cb_pcidda_ai_cmdtest(), and
cb_pcidda_ns_to_timer() are all partially coded stubs for command
support with the analog output subdevice. Just remove the code
since it is #if 0'ed out. It can be added back later if command
support is completed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the prompt line and description for the COMEDI_AMPLC_DIO200_PCI
config option to add the new PCIe boards supported by the "amplc_dio200"
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:13 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: support multiple read/write of counter
Change the `insn_read` and `insn_write` handlers of the '8254' counter
subdevices to support reading and writing multiple data values.
(Writing multiple values isn't very useful, but if that's what the user
wants....)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:08 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: allow extra clock and gate sources
One of the enhancements of the new PCIe boards is the addition of extra
clock and gate sources. Allow clock and gate sources up to 31 for these
boards (compared to 7 for the old boards) although most of those are
reserved for future use.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:07 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: enable enhanced features of PCIe boards
The new PCIe boards PCIe215, PCIe236 and PCIe296 have some enhanced
features (over the older boards), although none of these features are
supported by this driver yet.
Enable the enhanced features in hardware and use `dio200_layouts[]` to
indicate which boards support the enhanced features.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:06 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: allow generation of PCIe interrupts
The new PCIe boards PCIe215, PCIe236 and PCIe296 need a special register
setting to allow generation of interrupts on the PCIe bus. Add
`dio200_pcie_board_setup()` to do this and call it from
`dio200_attach_pci()` for those boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:05 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: support PCIe215, PCIe236 and PCIe296
Add preliminary support for the above PCIe boards. The interrupt
subdevice is not working yet as the boards need some additional
initialization to enable interrupts. Reserve an unused subdevice that
will eventually become a timer subdevice.
Some unused subdevices have been added between the used subdevices on
the PCIe215 and PCIe236. This is so the subdevice numbers will match a
pattern-matching feature to be added at a later date, where the
pattern-match specifications for a subdevice include pattern-match
results from other subdevices, specified by index.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:04 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: add register shift to board info
Add `mainshift` member to `struct dio200_board` to hold the amount of
left-shift required for main register offsets. This is 0 for all the
boards currently supported so it doesn't need initializing explicitly in
any current element of `dio200_boards[]`. It will be non-zero for some
new boards to be supported by this driver.
Modify the register access functions `dio200_read8()` and
`dio200_write8()` to take the shift into account.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:03 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: add min register region size in board
Store the length of the main register region in new member `mainsize` of
`struct dio200_board` and initialize it in each element of
`dio200_boards[]`. For all currently supported boards this is
initialized to `DIO200_IO_SIZE` (0x20), but will be different for newer
boards to be supported in the future.
For ISA boards, this is the actual region length requested, but for PCI
boards it's the minimum expected region length. Verify that the PCI BAR
region length is sufficient in `dio200_attach_pci()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:02 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: add PCI BAR information to board
Add `mainbar` member to `struct dio200_board` to hold the PCI BAR number
for the main registers. This is `2` for the PCI boards currently
supported (PCI215 and PCI272) but will be different for some new boards
to be supported later.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:01 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: support memory-mapped I/O
The boards currently supported by this module all use port I/O. Support
memory-mapped I/O as well for future PCI/PCIe cards.
Define `struct dio200_region` to hold the type of register access and
either the port I/O base address or an ioremapped MMIO address. Add a
member `io` to the comedi device private data (`struct dio200_private`)
to hold this. Use this instead of `dev->iobase`. Memory-mapped
registers are mapped in `dio200_pci_attach()` and unmapped in
`dio200_detach()`.
`dio200_detach()` now uses the private data pointer `devpriv` set to
`dev->private` but can return early if it is `NULL` because no clean-up
needs to be done in that case.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:48:00 +0000 (16:48 +0100)]
staging: comedi: amplc_dio200: set dev->iobase before common attach
Don't pass the I/O base address to `dio200_common_attach()`. The only
thing it does with it is set `dev->iobase` to the passed in value. Do
that before calling `dio200_common_attach()` in order to simplify
upcoming support for different register access methods.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:59 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: use custom register access functions
Add custom functions to access hardware registers and call them instead
of calling `inb()` and `outb()` directly. When additional cards are
supported by this driver requiring different register access methods,
the new functions will localize the register access differences to just
these functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "amplc_dio200" module no longer depends on the "8255" module, so the
'COMEDI_AMPLC_DIO200' Kconfig setting no longer needs to select
'COMEDI_8255'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:57 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: internalize 8255 DIO implementation
Implement the '8255' DIO subdevice internally to this module instead of
using the external "8255" module. I plan to add support for additional
cards to this driver that would require the I/O callback functionality
of the 8255 module, but the existing callback functions do not have much
context to handle this elegantly. The additional cards also have extra
DIO features which cannot be handled by the existing "8255" module and
that I'd like to support some time in the future.
The bottom line is I _could_ continue using the "8255" module for a
while with a callback function, but it would turn out to be a very ugly
callback function and I'd have to ditch the use of the "8255" module as
soon as I added an extra feature to the DIO subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:56 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: add functions to access 8254 counters
Add our own functions to manipulate the '8254' counter chip instead of
the inline ones from "8253.h". This will make the code less messy when
we add code to support new boards later.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:55 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: use register offsets in subdevices
Replace the absolute, modified I/O base addresses in the private data
structures for the '8254' counter and 'intr' DIO subdevices with offsets
from the main I/O base address. `dio200_subdev_intr_init()` now needs
the offset instead of the absolute address. `dio200_subdev_8254_init()`
now only needs the offset instead of both the absolute address and the
offset. The '8255' DIO subdevices are unaffected as they are handled by
the external "8255" module.
This change is not useful by itself but is an intermediate step for
later changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:54 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: remove 'has_clk_gat_sce' from subdevice
The `has_clk_gat_sce` member of `struct dio200_subdev_8254` indicates
whether the board has clock and gate source selection registers. The
same information can be obtained from read-only board layout data so
doesn't need to be set per '8254' counter subdevice. Eliminate the
member and use the read-only data instead. The last parameter of
`dio200_subdev_8254_init()` is used to initialize this member, so remove
that parameter as well.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:53 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: add helpers to get board layout
Add inline helper function `dio200_board_layout(board)` to get a pointer
to the board layout data for a board. Add inline helper function
`dio200_dev_layout(dev)` to get a pointer to the board layout data for a
comedi device (this function is currently unused but will be used by a
later change).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the tag name `dio200_layout` is available, rename `struct
dio200_layout_struct` to `struct dio200_layout` as the `_struct` suffix
is a bit redundant and I plan to use this type in other places in the
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:50 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: pass device to clock/gate config
Rename the clock and gate configuration functions for the '8254' counter
subdevices and pass in the pointers to the comedi device and comedi
subdevice. This is just preparing the way for later changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:48 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: no need to set hw_dev
The call to `comedi_set_hw_dev()` from `dio200_pci_common_attach()` is
now unnecessary since `dio200_pci_common_attach()` is now only called
from this driver's `attach_pci` hook `dio200_attach_pci()` and the
comedi core now calls `comedi_set_hw_dev()` before calling that. Remove
the unnecessary call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:47 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: no need to manipulate PCI ref count
Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`dio200_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count. Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 24 Oct 2012 15:47:46 +0000 (16:47 +0100)]
staging: comedi: amplc_dio200: remove manual configuration of PCI boards
Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards will be attached automatically at probe time via
`comedi_pci_auto_config()` and the `attach_pci` hook in the `struct
comedi_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YAMANE Toshiaki [Wed, 24 Oct 2012 12:06:17 +0000 (21:06 +0900)]
staging/comedi: Use pr_ or dev_ printks in drivers/unioxx5.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
YAMANE Toshiaki [Wed, 24 Oct 2012 06:14:46 +0000 (15:14 +0900)]
staging/comedi: Use pr_ or dev_ printks in drivers/usbduxfast.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
YAMANE Toshiaki [Wed, 24 Oct 2012 02:52:58 +0000 (11:52 +0900)]
staging/sbe-2t3e3: Use netdev_ or dev_ or pr_ printks in module.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
This function handles all the insn_config instructions for the
digital i/o subdevice. These functions are supposed to return
the number of instruction parameters used (insn->n) or an -errno.
Fix the switch() so that the correct result is returned for all
INSN_CONFIG_* cases.
To clarify the code, add a local variable for the 'bit' used with
the instructions used to configure and query the input/output setting
of a channel.
For aesthetic reasons, add a whitespace between each case to improve
readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This BUG_ON can never happen. The 'chan' value comes from the comedi
core in the insn->chanspec and will always be in range for the subdevice
number of channels (s->n_chan = NUM_PFI_CHANNELS).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_660x: remove inline function board()
This function is used to get the dev->board_ptr from the
comedi_device. Remove the function and use a local variable
to hold the pointer where used. Use the comedi_board() helper
to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This inline function has a very generic name and it's only a
wrapper around a simple kzalloc(). Since the inline function
does not save any lines-of-code, instead of renaming it just
remove it and do the kzalloc() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Henk de Groot <pe1dnn@amsat.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ceri James [Tue, 23 Oct 2012 12:51:56 +0000 (13:51 +0100)]
Staging: bcm: LeakyBucket.c: Checkpatch fixes
This fixes the following checkpatch issues:
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");
^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");
^
Signed-off-by: Ceri James <jamesceri@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Tue, 23 Oct 2012 22:34:15 +0000 (23:34 +0100)]
staging: et131x: Fix i386 build warnings from use of dma_addr_t
dma_addr_t can be of size 64 or 32bits, depending on the architecture.
This fixes these build warnings for ARCH=i386, and also tested on x86_64:
drivers/staging/et131x/et131x.c: In function ‘et131x_rx_dma_memory_alloc’:
drivers/staging/et131x/et131x.c:2356:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c:2378:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c: In function ‘free_send_packet’:
drivers/staging/et131x/et131x.c:3540:5: warning: left shift count >= width of type [enabled by default]
The driver checks that the device can handle 64bit DMA addressing in
et131x_pci_setup(), but then assumes that the top dword of a tx dma
address is always zero when creating a dma mapping in nic_send_packet().
Fix the mapping to use the higher dword of the dma_addr_t returned by
dma_map_single() and skb_frag_dma_map().
Also remove incorrect comments stating that dma_map_single() only returns
a 32 bit address.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Wed, 17 Oct 2012 21:15:11 +0000 (22:15 +0100)]
staging: et131x: Use skb_headlen() where appropriate
(skb->len - skb->data_len) is used in several places in the et131x
driver code. Converted all instances of this to use skb_headlen()
which is more readable.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>