Hariprasad S [Wed, 4 May 2016 19:57:32 +0000 (01:27 +0530)]
RDMA/iw_cxgb4: remove connection abort from process_mpa_reply
Instead, have the caller, rx_data() handle the close/abort like
it does for process_mpa_request(). This is part of getting rid of
abort_connection() altogether so we properly clean up on send_abort()
failures.
Hariprasad S [Wed, 4 May 2016 19:57:31 +0000 (01:27 +0530)]
RDMA/iw_cxgb4: ensure eps don't get freed while the mutex is held
In rx_data(), with the ep in FPDU_MODE, refcnt=2, if we get unexpected
streaming data, we call c4iw_modify_rc_qp() and move the qp from
RTS -> TERMINATE. In c4iw_modify_rc_qp(), if rdma_fini() returns
an error, the ep will be dereferenced (refcnt=1). Then rx_data()
calls c4iw_ep_disconnect() which starts the close operation.
But if send_halfclose() fails in c4iw_ep_disconnect(), we will call
release_ep_resources() derefing the ep which reduces the refcnt to 0 and
and frees the ep. However we still has the ep mutex at that point, so we
have a touch-after-free bug. There is a similar issue where
peer_close() calls c4iw_ep_disconnect().
The solution is to add a reference to the ep in c4iw_ep_disconnect()
after acquiring the mutex, and release it after releasing the mutex.
Hariprasad S [Wed, 4 May 2016 19:57:30 +0000 (01:27 +0530)]
RDMA/iw_cxgb4: stop ep timer on close failure
In c4iw_ep_disconnect(), if we start the ep timer to begin a close,
but send_halfclose() fails, we need to stop the timer and send a CLOSE
event up to the IWCM before releasing the resources. Otherwise, we can
crash when the ep timer fires if the ep is referencing a previous instance
of the device. This can happen as part of adapter reset/recovery, for
instance.
Hariprasad S [Wed, 4 May 2016 19:57:29 +0000 (01:27 +0530)]
RDMA/iw_cxgb4: release ep resources on accept arp failure
If ARP fails before the CPL_PASS_ACCEPT_RPL is seen by hardware, the tid
will be stuck in SYN_PEND and never released. So create an arp failure
handler specifically for this message to release the endpoint resources.
In pass_accept_rpl_arp_failure(), put the parent endpoint so it will
be freed when destroyed. Also we don't need to call release_tid() here
because _c4iw_free_ep() calls cxgb4_remove_tid() which releases the
hwtid.
If we get an ABORT_REQ_RSS instead of a PASS_ESTABLISH (because the
peer's ACK to our SYN is never received), then put the parent as well
in peer_abort().
Treat accept_cr() failures just like arp failures: put the parent ep
and release the ep resources destroying the tid
The ARP failure handlers are called in an atomic context, so we need to
schedule some of the processing which might block. Namely _c4iw_free_ep()
which needs a mutex. So create a "special" CPL opcode and handler and
schedule it via sched() to be run by process_work() in a blockable context.
Also rework the active open arp failure handler to make use of
release_ep_resources(). This allows both the active and passive arp
failure handlers to use the same deferred cleanup function.
iSER currently has a couple places that set max_sectors in either the host
template or SCSI host, and all of them get it wrong.
This patch instead uses a single assignment that (hopefully) gets it right:
the max_sectors value must be derived from the number of segments in the
FR or FMR structure, but actually be one lower than the page size multiplied
by the number of sectors, as it has to handle the case of non-aligned I/O.
Without this I get trivial to reproduce hangs when running xfstests
(on XFS) over iSER to Linux targets.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe [Mon, 11 Apr 2016 01:13:13 +0000 (19:13 -0600)]
IB/security: Restrict use of the write() interface
The drivers/infiniband stack uses write() as a replacement for
bi-directional ioctl(). This is not safe. There are ways to
trigger write calls that result in the return structure that
is normally written to user space being shunted off to user
specified kernel memory instead.
For the immediate repair, detect and deny suspicious accesses to
the write API.
For long term, update the user space libraries and the kernel API
to something that doesn't present the same security vulnerabilities
(likely a structured ioctl() interface).
The impacted uAPI interfaces are generally only available if
hardware from drivers/infiniband is installed in the system.
Reported-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[ Expanded check to all known write() entry points ] Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
Dean Luick [Fri, 22 Apr 2016 18:17:03 +0000 (11:17 -0700)]
IB/hfi1: Use kernel default llseek for ui device
The ui device llseek had a mistake with SEEK_END and did
not fully follow seek semantics. Correct all this by
using a kernel supplied function for fixed size devices.
Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit re-arranges the context initialization code in a way that
would allow for context event flags to be used to determine whether
the context has been successfully initialized.
In turn, this can be used to skip the resource de-allocation if they
were never allocated in the first place.
Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com. Signed-off-by: Doug Ledford <dledford@redhat.com>
Jubin John [Tue, 12 Apr 2016 17:47:00 +0000 (10:47 -0700)]
IB/rdmavt: Fix send scheduling
call_send is used to determine whether to send immediately or schedule
a send for later. The current logic in rdmavt is inverted and has a
negative impact on the latency of the hfi1 and qib drivers. Fix this
regression by correctly calling send immediately when call_send is set.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1: Fix deadlock caused by locking with wrong scope
The locking around the interval RB tree is designed to prevent
access to the tree while it's being modified. The locking in its
current form is too overzealous, which is causing a deadlock in
certain cases with the following backtrace:
As evident from the backtrace above, the process was being put to sleep
while holding the lock.
Limiting the scope of the lock only to the RB tree operation fixes the
above error allowing for proper locking and the process being put to
sleep when needed.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/hfi1: Prevent NULL pointer deferences in caching code
There is a potential kernel crash when the MMU notifier calls the
invalidation routines in the hfi1 pinned page caching code for sdma.
The invalidation routine could call the remove callback
for the node, which in turn ends up dereferencing the
current task_struct to get a pointer to the mm_struct.
However, the mm_struct pointer could be NULL resulting in
the following backtrace:
To correct this, the mm_struct passed to us by the MMU notifier is
used (which is what should have been done to begin with). This avoids
the broken derefences and ensures that the correct mm_struct is used.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Sagi Grimberg [Thu, 31 Mar 2016 16:03:25 +0000 (19:03 +0300)]
IB/mlx5: Expose correct max_sge_rd limit
mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation
where rdma read work queue entries cannot exceed 512 bytes.
A rdma_read wqe needs to fit in 512 bytes:
- wqe control segment (16 bytes)
- rdma segment (16 bytes)
- scatter elements (16 bytes each)
So max_sge_rd should be: (512 - 16 - 16) / 16 = 30.
Cc: linux-stable@vger.kernel.org Reported-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Hariprasad S [Tue, 5 Apr 2016 04:53:48 +0000 (10:23 +0530)]
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
For T4, kernel mode qps don't use the user doorbell. User mode qps during
flow control db ringing are forced into kernel, where user doorbell is
treated as kernel doorbell and proper bar2 offset in bar2 virtual space is
calculated, which incase of T4 is a bogus address, causing a kernel panic
due to illegal write during doorbell ringing.
In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4
check during bar2 virtual address calculation to return 0. Fixed Bar2
range checks based on bar2 physical address.
Steve Wise [Tue, 12 Apr 2016 13:55:01 +0000 (06:55 -0700)]
iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp
port map daemon. But iw_cxgb3 did not initialize this field which
causes intermittent registration failures based on the contents of the
uninitialized memory.
Fixes: c1340e8aa628 ("iw_cxgb3: support for iWARP port mapping") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Tue, 12 Apr 2016 13:54:54 +0000 (06:54 -0700)]
iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp
port map daemon. But iw_cxgb4 did not initialize this field which
causes intermittent registration failures based on the contents of the
uninitialized memory.
Fixes: 170003c894d9 ("iw_cxgb4: remove port mapper related code") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
The drain_rq function expects a normal receive qp to drain. A qp can
only have either a normal rq or an srq. If there is an srq, there
is no rq to drain. Until the API supports draining SRQs, simply
skip draining the rq when the qp has an srq attached.
Fixes: 765d67748bcf ("IB: new common API for draining queues") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
When we fail to find the default gid index, we can't continue
processing in this routine or else we will pass a negative
index to later routines resulting in invalid memory access
attempts and a kernel oops.
Arnd Bergmann [Wed, 23 Mar 2016 10:34:36 +0000 (11:34 +0100)]
i40iw: avoid potential uninitialized variable use
gcc finds that the i40iw_make_cm_node() function in the recently added
i40iw driver uses an uninitilized variable as an index into an array
if CONFIG_IPV6 is disabled and the driver uses IPv6 mode:
drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node':
drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized]
ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr);
As far as I can tell, this code path can not be used because the ipv4
variable is always set with CONFIG_IPV6 is disabled, but it's better
to be sure and prevent the undefined behavior, as well as shut up
that warning in a proper way.
This adds an 'else' clause for the case we get the warning about,
causing the function to return an error in a controlled way.
To avoid adding extra mess with combined io()/#ifdef clauses,
I'm also converting the existing #ifdef into a more readable
if(IS_ENABLED()) check.
Arnd Bergmann [Wed, 23 Mar 2016 10:37:45 +0000 (11:37 +0100)]
IB/mlx5: fix VFs callback function prototypes
The previous patch that added a couple of callback functions put
the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING,
which causes the build to fail if that option is disabled:
drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add':
drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function)
This moves the four declarations below the #ifdef section so they
are always available.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: eff901d30e6c ("IB/mlx5: Implement callbacks for manipulating VFs") Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core kernel fixes from Ingo Molnar:
"This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness
you noted during the original nohz pull request, plus there's also
misc fixes:
- fix liblockdep build bug
- fix uapi header build bug
- print more lockdep hash collision info to help debug recent reports
of hash collisions
- update MAINTAINERS email address"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update my email address
locking/lockdep: Print chain_key collision information
uapi/linux/stddef.h: Provide __always_inline to userspace headers
tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh
locking/atomic, sched: Unexport fetch_or()
timers/nohz: Convert tick dependency mask to atomic_t
locking/atomic: Introduce atomic_fetch_or()
Commit 840f5b0572ea ("media: au0828 disable tuner to demod link in
au0828_media_device_register()") removed all uses of the 'dtv_demod',
but left the variable itself around.
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This lot contains:
- Some fixups for the fallout of the topology consolidation which
unearthed AMD/Intel inconsistencies
- Documentation for the x86 topology management
- Support for AMD advanced power management bits
- Two simple cleanups removing duplicated code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add advanced power management bits
x86/thread_info: Merge two !__ASSEMBLY__ sections
x86/cpufreq: Remove duplicated TDP MSR macro definitions
x86/Documentation: Start documenting x86 topology
x86/cpu: Get rid of compute_unit_id
perf/x86/amd: Cleanup Fam10h NB event constraints
x86/topology: Fix AMD core count
Merge tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc
Pull remoteproc fix from Bjorn Andersson:
"Fix incorrect error check in the ST remoteproc driver and advertise
the newly created linux-remoteproc mailing list"
* tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc:
MAINTAINERS: Add mailing list for remote processor subsystems
remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value
Pull SCSI target fixes from Nicholas Bellinger:
"This includes fixes from HCH for -rc1 configfs default_groups
conversion changes that ended up breaking some iscsi-target
default_groups, along with Sagi's ib_drain_qp() conversion for
iser-target to use the common caller now available to RDMA kernel
consumers in v4.6+ code"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: add a new add_wwn_groups fabrics method
target: initialize the nacl base CIT begfore init_nodeacl
target: remove ->fabric_cleanup_nodeacl
iser-target: Use ib_drain_qp
Convert straggling drivers to new six-argument get_user_pages()
Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to
not pass tsk/mm") switched get_user_pages() callers to the simpler model
where they no longer pass in the thread and mm pointer. But since then
we've merged changes to a few drivers that re-introduce use of the old
interface. Let's fix them up.
They continued to work fine (thanks to the truly disgusting macros
introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages()
functions"), but cause unnecessary build noise.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of const updates for reset ops and a couple fixes to the
newly introduced IPQ4019 clock driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll
clk: qcom: ipq4019: switch remaining defines to enums
clk: qcom: Make reset_control_ops const
clk: tegra: Make reset_control_ops const
clk: sunxi: Make reset_control_ops const
clk: atlas7: Make reset_control_ops const
clk: rockchip: Make reset_control_ops const
clk: mmp: Make reset_control_ops const
clk: mediatek: Make reset_control_ops const
Merge tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fix from Rafael J. Wysocki:
"Just one fix for a nasty boot failure on some systems based on Intel
Skylake that shipped with broken firmware where enabling
hardware-coordinated P-states management (HWP) causes a faulty
interrupt handler in SMM to be invoked and crash the system (Srinivas
Pandruvada)"
* tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Request native thermal interrupt handling via _OSC
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
.mailmap: add Christophe Ricard
Make CONFIG_FHANDLE default y
mm/page_isolation.c: fix the function comments
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
mm/page_isolation: fix tracepoint to mirror check function behavior
mm/rmap: batched invalidations should use existing api
x86/mm: TLB_REMOTE_SEND_IPI should count pages
mm: fix invalid node in alloc_migrate_target()
include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock()
mm, kasan: fix compilation for CONFIG_SLAB
MAINTAINERS: orangefs mailing list is subscribers-only
Merge branch 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This has a few fixes Dave Sterba had queued up. These are all pretty
small, but since they were tested I decided against waiting for more"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: transaction_kthread() is not freezable
btrfs: cleaner_kthread() doesn't need explicit freeze
btrfs: do not write corrupted metadata blocks to disk
btrfs: csum_tree_block: return proper errno value
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix oops when patching in alternative sequences on big-endian CPUs
- reconcile asm/perf_event.h after merge window fallout with KVM ARM
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: updates for 4.6
arm64: perf: Move PMU register related defines to asm/perf_event.h
arm64: opcodes.h: Add arm big-endian config options before including arm header
Merge tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- a fix in ALSA timer core to avoid possible BUG() trigger
- a fix in ALSA timer core 32bit compat layer
- a few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- fixes of USB-audio double-free at some error paths
- a fix for memory leak in DICE driver at hotunplug"
* tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Use mod_timer() for rearming the system timer
ALSA: hda - fix front mic problem for a HP desktop
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
ALSA: dice: fix memory leak when unplugging
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: fix gparams ioctl compatibility for different architectures
Newer Fedora and OpenSUSE didn't boot with my standard configuration.
It took me some time to figure out why, in fact I had to write a script
to try different config options systematically.
The problem is that something (systemd) in dracut depends on
CONFIG_FHANDLE, which adds open by file handle syscalls.
While it is set in defconfigs it is very easy to miss when updating
older configs because it is not default y.
Make it default y and also depend on EXPERT, as dracut use is likely
widespread.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Zhang [Fri, 1 Apr 2016 21:31:37 +0000 (14:31 -0700)]
mm/page_isolation.c: fix the function comments
Commit fea85cff11de ("mm/page_isolation.c: return last tested pfn rather
than failure indicator") changed the meaning of the return value. Let's
change the function comments as well.
Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 1 Apr 2016 21:31:34 +0000 (14:31 -0700)]
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
Commit bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using
simpler way") has simplified the check for tasks already enqueued for
the oom reaper by checking tsk->oom_reaper_list != NULL. This check is
not sufficient because the tsk might be the head of the queue without
any other tasks queued and then we would simply lockup looping on the
same task. Fix the condition by checking for the head as well.
Fixes: bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lucas Stach [Fri, 1 Apr 2016 21:31:32 +0000 (14:31 -0700)]
mm/page_isolation: fix tracepoint to mirror check function behavior
Page isolation has not failed if the fin pfn extends beyond the end pfn
and test_pages_isolated checks this correctly. Fix the tracepoint to
report the same result as the actual check function.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nadav Amit [Fri, 1 Apr 2016 21:31:26 +0000 (14:31 -0700)]
mm/rmap: batched invalidations should use existing api
The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown. However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.
This patch reuses the existing TLB flushing mechnaisms instead. We use
NULL as mm to indicate a global invalidation is required.
Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nadav Amit [Fri, 1 Apr 2016 21:31:23 +0000 (14:31 -0700)]
x86/mm: TLB_REMOTE_SEND_IPI should count pages
TLB_REMOTE_SEND_IPI was recently introduced, but it counts bytes instead
of pages. In addition, it does not report correctly the case in which
flush_tlb_page flushes a page. Fix it to be consistent with other TLB
counters.
Fixes: 5b74283ab251b9d ("x86, mm: trace when an IPI is about to be sent") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is incorrect to use next_node to find a target node, it will return
MAX_NUMNODES or invalid node. This will lead to crash in buddy system
allocation.
Marcin Wojtas [Fri, 1 Apr 2016 13:21:18 +0000 (15:21 +0200)]
net: mvneta: fix changing MTU when using per-cpu processing
After enabling per-cpu processing it appeared that under heavy load
changing MTU can result in blocking all port's interrupts and
transmitting data is not possible after the change.
This commit fixes above issue by disabling percpu interrupts for the
time, when TXQs and RXQs are reconfigured.
Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Initially the phy_bus_name was added to manipulate the
driver name but it was recently just used to manage the
fixed-link and then to take some decision at run-time.
So the patch uses the is_pseudo_fixed_link and removes
the phy_bus_name variable not necessary anymore.
The driver can manage the mdio registration by using phy-handle,
dwmac-mdio and own parameter e.g. snps,phy-addr.
This patch takes care about all these possible configurations
and fixes the mdio registration in case of there is a real
transceiver or a switch (that needs to be managed by using
fixed-link).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "stmmac: Fix 'eth0: No PHY found' regression"
This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493.
due to problems on GeekBox and Banana Pi M1 board when
connected to a real transceiver instead of a switch via
fixed-link.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixs a regression raised when test on chips that use
the normal descriptor layout. In fact, no len bits were set for
the TDES1 and no OWN bit inside the TDES0.
Signed-off-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Tested-by: Andreas Färber <afaerber@suse.de> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled
from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH,
DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices.
Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu
fixes") sk_attach_filter()/sk_detach_filter() now dereferences the
filter with rcu_dereference_protected(), checking whether socket lock
is held in control path.
Since its introduction in 994051625981 ("tun: socket filter support"),
tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the
sock_owned_by_user(sk) doesn't apply in this specific case and therefore
triggers the false positive.
Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair
that is used by tap filters and pass in lockdep_rtnl_is_held() for the
rcu_dereference_protected() checks instead.
Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nothing too crazy in here: a bunch of AMD fixes/quirks, two msm fixes,
some rockchip fixes, and a udl warning fix, along with one locking fix
for displayport that seems to fix some dodgy monitors"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/udl: Use unlocked gem unreferencing
drm/dp: move hw_mutex up the call stack
drm/amdgpu: Don't move pinned BOs
drm/radeon: Don't move pinned BOs
drm/radeon: add a dpm quirk for all R7 370 parts
drm/radeon: add another R7 370 quirk
drm/rockchip: dw_hdmi: Don't call platform_set_drvdata()
drm/rockchip: vop: Fix vop crtc cleanup
drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path
drm/rockchip: vop: Disable planes when disabling CRTC
drm/rockchip: vop: Don't reject empty modesets
drm/rockchip: cancel pending vblanks on close
drm/rockchip: vop: fix crtc size in plane check
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5
drm/amd: Beef up ACP Kconfig menu text
drm/msm: fix typo in the !COMMON_CLK case
drm/msm: fix bug after preclose removal
Merge tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fixup preempt underflow with huge pages from Sebastian Siewior
- Fix altivec SPR not being saved from Oliver O'Halloran
- Correct used_vsr comment from Simon Guo
* tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Correct used_vsr comment
powerpc/process: Fix altivec SPR not being saved
powerpc/mm: Fixup preempt underflow with huge pages
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A proper fix for the locking issue in the dasd driver
- Wire up the new preadv2 nad pwritev2 system calls
- Add the mark_rodata_ro function and set DEBUG_RODATA=y
- A few more bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up preadv2/pwritev2 syscalls
s390/pci: PCI function group 0 is valid for clp_query_pci_fn
s390/crypto: provide correct file mode at device register.
s390/mm: handle PTE-mapped tail pages in fast gup
s390: add DEBUG_RODATA support
s390: disable postinit-readonly for now
s390/dasd: reorder lcu and device lock
s390/cpum_sf: Fix cpu hotplug notifier transitions
s390/cpum_cf: Fix missing cpu hotplug notifier transition
ALSA: timer: Use mod_timer() for rearming the system timer
ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead. This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup. However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
kernel BUG at kernel/time/timer.c:966!
Call Trace:
<IRQ>
[<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
[<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
[<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
[<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
[<ffffffff81296b72>] call_timer_fn+0x162/0x520
[<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
[<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
....
It's the place where add_timer() checks the pending timer. It's clear
that this may happen after the immediate restart without sync in our
cases.
So, the workaround here is just to use mod_timer() instead of
add_timer(). This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.
Pierre Morel [Wed, 16 Mar 2016 12:56:35 +0000 (13:56 +0100)]
s390/pci: PCI function group 0 is valid for clp_query_pci_fn
The PCI function group 0 is a valid function group,
it is wrong to reject it.
Let's accept PCI function group 0.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Daniel Vetter [Wed, 30 Mar 2016 09:40:43 +0000 (11:40 +0200)]
drm/udl: Use unlocked gem unreferencing
For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with
Rob Clark [Thu, 25 Feb 2016 21:15:05 +0000 (16:15 -0500)]
drm/dp: move hw_mutex up the call stack
1) don't let other threads trying to bang on aux channel interrupt the
defer timeout/logic
2) don't let other threads interrupt the i2c over aux logic
Technically, according to people who actually have the DP spec, this
should not be required. In practice, it makes some troublesome Dell
monitor (and perhaps others) work, so probably a case of "It's compliant
if it works with windows" on the hw vendor's part..
v2: rebased to come before DPCD/AUX logging patch for easier backport
to stable branches.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157 Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 1 Apr 2016 03:14:10 +0000 (13:14 +1000)]
Merge branch 'msm-fixes-4.6-rc1' of git://people.freedesktop.org/~robclark/linux into drm-fixes
two minor msm fixes.
* 'msm-fixes-4.6-rc1' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix typo in the !COMMON_CLK case
drm/msm: fix bug after preclose removal
Dave Airlie [Fri, 1 Apr 2016 03:13:34 +0000 (13:13 +1000)]
Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just a few fixes for 4.6 this week:
- Add some SI DPM quirks
- Improve the ACP Kconfig text
- Additional BO pinning checks
* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Don't move pinned BOs
drm/radeon: Don't move pinned BOs
drm/radeon: add a dpm quirk for all R7 370 parts
drm/radeon: add another R7 370 quirk
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5
drm/amd: Beef up ACP Kconfig menu text
Nicolas Dichtel [Thu, 31 Mar 2016 16:10:31 +0000 (18:10 +0200)]
rtnl: fix msg size calculation in if_nlmsg_size()
Size of the attribute IFLA_PHYS_PORT_NAME was missing.
Fixes: db24a9044ee1 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 30 Mar 2016 11:55:21 +0000 (19:55 +0800)]
net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
The mvneta is also used in some Marvell berlin family SoCs which may
have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE
usage with L1_CACHE_BYTES.
And since dma_alloc_coherent() is always cacheline size aligned, so
remove the align checks.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the vendor-specific bootloaders set up this part
of the initialization for us, so this was never added.
However, since upstream bootloaders don't initialize the
chip specifically, they leave the fiber MII's PDOWN flag
set, which means that the CPU port doesn't connect.
This patch checks whether this flag has been clear prior
by something else, and if not make us clear it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add versions of the phy_page_read and _write functions to
be used in a context where the SMI mutex is held.
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladis Dronov [Thu, 31 Mar 2016 16:05:43 +0000 (12:05 -0400)]
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and
create_uaxx_quirk() functions allocate the audioformat object by themselves
and free it upon error before returning. However, once the object is linked
to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be
double-freed, eventually resulting in a memory corruption.
This patch fixes these failures in the error paths by unlinking the audioformat
object before freeing it.
Based on a patch by Takashi Iwai <tiwai@suse.de>
[Note for stable backports:
this patch requires the commit 902eb7fd1e4a ('ALSA: usb-audio: Minor
code cleanup in create_fixed_stream_quirk()')]
This was quite an oversight. After a readdir, the module could not be
unloaded, the number of slots is wrong, and memory near the slot bitmap
is possibly corrupt. Oops.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
David S. Miller [Thu, 31 Mar 2016 15:40:16 +0000 (11:40 -0400)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2016-03-29
This series contains fixes to ixgbe and ixgbevf.
Tushar fixes an issue which was introduced with an earlier commit, where
hardware register RAR0 default MAC address does not get set properly.
Alex fixes two issues, first being the VXLAN port number should be stored
in network order instead of in host order. The second fix corrects the ATR
code to handle IPv6 extension headers. The issue was ATR code was assuming
that it would be able to use tcp_hdr for every TCP frame that came through,
but that is not the case, which resulted in bad filters being setup.
Mark fixes a use of usleep_range() to udelay() in the case where a lock
is being held.
Stefan fixes the offline self tests where ndo_stop() should be used instead
of ndo_close(), which causes IFF_UP to be cleared and interface routes get
removed.
Emil fixes the error case where we need to return an error when a MAC
address change is rejected by the PF. This helps prevent the user from
modifying the MAC address when the operation is not permitted.
Sridhar provides three fixes for ixgbe, all dealing with traffic class
offload handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 31 Mar 2016 12:55:14 +0000 (07:55 -0500)]
Merge branch 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Fix seccomp filter support and SIGSYS signals on compat kernel.
Both patches are tagged for v4.5 stable kernel"
* 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and enable seccomp filter support
parisc: Fix SIGSYS signals in compat case
Linus Torvalds [Thu, 31 Mar 2016 12:19:39 +0000 (07:19 -0500)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro.
Automount handling was broken by commit e3c13928086f ("namei: massage
lookup_slow() to be usable by lookup_one_len_unlocked()") moving the
test for negative dentry too early.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the braino in "namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()"
Linus Torvalds [Thu, 31 Mar 2016 12:13:56 +0000 (07:13 -0500)]
Merge tag 'gpio-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are two GPIO fixes for the v4.6 series, both in drivers:
- Prevent NULL dereference in the Xgene driver
- Fix an uninitialized spinlock in the menz127 driver"
* tag 'gpio-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: xgene: Prevent NULL pointer dereference
gpio: menz127: Drop lock field from struct men_z127_gpio
Linus Torvalds [Thu, 31 Mar 2016 11:56:50 +0000 (06:56 -0500)]
Merge branch 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm mcsafe_memcpy use from Dan Williams:
"Now that mcsafe_memcpy() has landed, and the return value was been
clarified in commit cbf8b5a2b649 ("x86/mm, x86/mce: Fix return
type/value for memcpy_mcsafe()"), let's hook up its primary usage in
the pmem driver.
The compilation problems from the initial posting have been fixed,
this has appeared in a -next release with no reported issues, and it
picked up an ack from Ingo. There is no pressing need to merge this
in 4.6- rc2. However, if we wait until 4.7 the new memcpy_mcsafe()
capability will ship without a user in 4.6-final"
* 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem()
Helge Deller [Wed, 30 Mar 2016 12:14:31 +0000 (14:14 +0200)]
parisc: Fix and enable seccomp filter support
The seccomp filter support requires careful handling of task registers. This
includes reloading of the return value (%r28) and proper syscall exit if
secure_computing() returned -1.
Additionally we need to sign-extend the syscall number from signed 32bit to
signed 64bit in do_syscall_trace_enter() since the ptrace interface only allows
storing 32bit values in compat mode.
Peter Zijlstra [Tue, 29 Mar 2016 07:26:44 +0000 (09:26 +0200)]
perf/core: Fix time tracking bug with multiplexing
Stephane reported that commit:
3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME")
introduced a regression wrt. time tracking, as easily observed by:
> This patch introduce a bug in the time tracking of events when
> multiplexing is used.
>
> The issue is easily reproducible with the following perf run:
>
> $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000
> 1.000730239 652,394 branches (66.41%)
> 1.000730239 597,809 branches (66.41%)
> 1.000730239 593,870 branches (66.63%)
> 1.000730239 651,440 branches (67.03%)
> 1.000730239 656,725 branches (66.96%)
> 1.000730239 <not counted> branches
>
> One branches event is shown as not having run. Yet, with
> multiplexing, all events should run especially with a 1s (-I 1000)
> interval. The delta for time_running comes out to 0. Yet, the event
> has run because the kernel is actually multiplexing the events. The
> problem is that the time tracking is the kernel and especially in
> ctx_sched_out() is wrong now.
>
> The problem is that in case that the kernel enters ctx_sched_out() with the
> following state:
> ctx->is_active=0x7 event_type=0x1
> Call Trace:
> [<ffffffff813ddd41>] dump_stack+0x63/0x82
> [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0
> [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0
> [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130
> [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0
> [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0
> [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60
> [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50
> [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0
>
> In that case, the test:
> if (is_active & EVENT_TIME)
>
> will be false and the time will not be updated. Time must always be updated on
> sched out.
Fix this by always updating time if EVENT_TIME was set, as opposed to
only updating time when EVENT_TIME changed.
Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: namhyung@kernel.org Fixes: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME") Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Thu, 31 Mar 2016 06:27:35 +0000 (08:27 +0200)]
Merge tag 'perf-urgent-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix determination of a callchain node's childlessness in
the top/report TUI, which was preventing navigating some
callchains, --stdio unnaffected (Andres Freund)
- Fix jitdump's genelf assumption that PowerPC is big endian
only (Anton Blanchard)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / linux-beck.git / log