Andy Shevchenko [Sat, 11 Sep 2010 14:17:04 +0000 (17:17 +0300)]
staging: rt2860: change plain format of mac address to %pM in *printf()
There are many locations where MAC or BSSID is printed. The plain format
is used in such places. *printf() in kernel recognizes
%pM, %pMF and %pm format parameters to print out 6-byte array as MAC
address. This patch changes plain format to custom %pM which is widely
used in kernel.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Cross [Fri, 10 Sep 2010 23:55:53 +0000 (16:55 -0700)]
staging: west bridge: cyasgadget, remove file system / vfs calls
This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.
Signed-off-by: David Cross <david.cross@cypress.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Maurice Dawson [Fri, 10 Sep 2010 19:20:42 +0000 (20:20 +0100)]
Staging: comedi: fix macro coding style issue in adl_pci9111.c
This is a patch that fixes up, macros with multiple statements should be enclosed in a do - while loop, coding style issue in the adl_pci9111.c file found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: batman-adv: Always synchronize rcu's on module shutdown
During the module shutdown procedure in batman_exit(), a rcu callback is
being scheduled (batman_exit -> hardif_remove_interfaces ->
hardif_remove_interfae -> call_rcu). However, when the kernel unloads
the module, the rcu callback might not have been executed yet, resulting
in a "unable to handle kernel paging request" in __rcu_process_callback
afterwards, causing the kernel to freeze.
The synchronize_net and synchronize_rcu in mesh_free are currently
called before the call_rcu in hardif_remove_interface and have no real
effect on it.
Therefore, we should always flush all rcu callback functions scheduled
during the shutdown procedure using synchronize_net. The call to
synchronize_rcu can be omitted because synchronize_net already calls it.
This is for the Asahi Kasei AK8975 3-axis magnetometer. It resides within
the magnetometer section of the IIO subsystem, and implements the raw
magn_x,y,z_raw attributes, as well as magn_x,y,z_scale attributes for
converting to Gauss.
Changed to use the magn_x,y,z_scale attributes, and made those attributes
give the scale factor to conert to Gauss. Also applied more fixes from
feedback.
Keeping mode as an unsigned long. I'm going to add proper power management
at some point anyway, which would deprecate this attribute.
Signed-off-by: Andrew Chew <achew@nvidia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: hv: Convert vmbus driver interface function pointer table to constant
Convert vmbus driver interface function pointer table to constant
The vmbus interface functions are assigned to a constant - vmbus_ops.
Because the vmbus interface function pointer table is converted to a
constant variable -- vmbus_ops, the function GetChannelInterface(),
VmbusGetChannelInterface() and pointer GetChannelInterface are no longer
in use. The deprecated function's work is done by the initialization of
the newly added constant variable vmbus_ops.
I created the new constant variable vmbus_ops and removed the deprecated
function pointer GetChannelInterface in one patch.
The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.
Here is a staging ready version (i.e warts and all)
0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops
Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.
This is compile tested only, see TODO for what still needs
to be done.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Al Cho [Wed, 8 Sep 2010 07:42:32 +0000 (00:42 -0700)]
Staging: add USB ENE card reader driver
This driver is for the ENE card reader that can be found in many
different laptops. It was written by ENE, but cleaned up to
work properly in the kernel tree by Novell.
Signed-off-by: Al Cho <acho@novell.com> Cc: <yiyingc@ene.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: xgifb: revert a warning fix and resolve it properly
Jiri pointed out that the previous compiler warning fix was incorrect as
the compiler was properly saying that the variable was not being set.
This was due to a #define commenting out all of the logic in the
function.
This patch reverts Javier's previous one, and properly fixes the issue
by making the function actually doing something.
Staging: xgifb: fixed many style issues in XGI_main_26.c
This is a patch to the XGI_main_26 file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: udlfb: fix incorrect fb_defio implementation for multiple framebuffers
Fix fb_defio bug in udlfb for multiple framebuffers
Previously when using fb_defio with multiple DisplayLink attached displays
udlfb incorrectly used a shared datastructure where it needed to have
one per fb_info struct. This was completely broken and caused all kinds of
problems, including rendering to one framebuffer affecting others.
Julia Lawall [Sun, 5 Sep 2010 19:00:24 +0000 (21:00 +0200)]
Staging: comedi: Fix unsigned return type
In each case, the function has an unsigned return type, but returns a
negative constant to indicate an error condition. For move_block_from_dma,
there is only one call and the return value is dropped, so it need not be
unsigned. For labpc_eeprom_write, there is only one call and the result is
stored in a signed variable, so again the unsigned return type is not
necessary.
A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
staging: udlfb: add module options for console and fb_defio
Add module options for console and fb_defio
Convert fb_defio on/off switch to module option and add console option.
>From the command line, pass options to modprobe
modprobe udlfb defio=1 console=1
Or for permanent option, create file like /etc/modprobe.d/options with text
options udlfb defio=1 console=1
Accepted options:
fb_defio Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
module to track changed areas of the framebuffer by page faults.
Standard fbdev applications that use mmap but that do not
report damage, may be able to work with this enabled.
Disabled by default because of overhead and other issues.
console Allow fbcon to attach to udlfb provided framebuffers. This
is disabled by default because fbcon will aggressively consume
the first framebuffer it finds, which isn't usually what the
user wants in the case of USB displays.
staging: udlfb: support for writing backup EDID to sysfs file
Support writing default/backup edid via /sys/class/graphics/fb?/edid
Writing a backup edid blob to the 'edid' file will cause udlfb to
attempt to re-read the edid from hardware.
If we still don't have a good edid, it will use the backup edid instead.
The intent is to 1) enable user-supplied edid
2) enable udev rules to backup the last known good edid
for a device, and then provide that edid as a backup for all future starts
staging: udlfb: enhance EDID and mode handling support
Enhance EDID and mode table handling
* Adds support for lower-end DL chips on higher-end monitors
* Adds support for using fbdev standard EDID parsing and handling
* Adds support for more dynamic reallocation of framebuffer, based on new EDID
Queries EDID from hardware with several retries then
queries DisplayLink chip for max pixel area via vendor descriptor.
Uses existing fbdev mode handling service funcations to build mode list
of common modes between adapter and monitor.
This enables lower-end chips (e.g. DL-125) to successfully pick a compatible
mode on higher end monitors (e.g. whose default mode is over 1280x1024).
Reallocate framebuffer if necessary in response to new max mode.
staging: udlfb: revamp reference handling to insure successful shutdown
Revamp reference handling and synchronization for unload/shutdown
Udlfb is a "virtual" framebuffer device that really exists on
two separate stacks: at the bottom of the framebuffer interface,
and on top of USB. During unload, there's no guarantee which
one will tear down first. So reference counting must be solid
to handle all possibilities and not access anything once its gone.
Previously returned multiple values, which goes against sysfs guidelines.
Had been used for debugging to figure out which of the multiple
fbdev interfaces an app was using, but log file messages are sufficient.
staging: udlfb: fbdev character read and write support
Restore fbdev character read and write support
Enables access to the framebuffer from simple reads and writes
to /dev/fb0 (or fb1, ...). Low performance, because of extra copy
and because udlfb must scan every pixel for changes. But very
useful for testing and simple image display, etc.
Sven Eckelmann [Sat, 4 Sep 2010 23:58:38 +0000 (01:58 +0200)]
Staging: batman-adv: Update mtu of bat device by changing mtu of slave device
We must reduce our own mtu when we reduce the mtu of any device we use
to transfer our packets. Otherwise we may accept to large packets which
gets dropped by the actual device.
Sven Eckelmann [Sat, 4 Sep 2010 23:58:37 +0000 (01:58 +0200)]
Staging: batman-adv: Don't inform about dropped packets in nodebug
Information about dropped packets are usually only interesting for
debugging purposes and otherwise open the possibility to flood the logs
of the target machine with useless information.
pr_debug will not output those information on a nodebug kernel.
Sven Eckelmann [Sat, 4 Sep 2010 23:58:36 +0000 (01:58 +0200)]
Staging: batman-adv: Remove duplicate of attached device name
batman_if has the name of the net_dev as extra string in its own
structure, but also holds a reference to the actual net_device structure
which always has the current name of the device. This makes it
unneccessary and also more complex because we must update the name in
situations when we receive a NETDEV_CHANGENAME event.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Sat, 4 Sep 2010 23:58:35 +0000 (01:58 +0200)]
Staging: batman-adv: multiple mesh clouds
This patch removes all remaining global variables and includes the
necessary bits into the bat_priv structure. It is the last
remaining piece to allow multiple concurrent mesh clouds on the
same device.
A few global variables have been rendered obsolete during the process
and have been removed entirely.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version] Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Sat, 4 Sep 2010 23:58:34 +0000 (01:58 +0200)]
Staging: batman-adv: attach each hard-interface to a soft-interface
This patch replaces the static bat0 interface with a dynamic/abstracted
approach. It is now possible to create multiple batX interfaces by
assigning hard interfaces to them. Each batX interface acts as an
independent mesh network. A soft interface is removed once no hard
interface references it any longer.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version] Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Sat, 4 Sep 2010 23:58:33 +0000 (01:58 +0200)]
Staging: batman-adv: Provide full headers and packets as linear skb
We must ensure that all interesting data is linear and not paged out to
access all information in a header or a full batman-adv related packet.
Otherwise we may drop packets which have non-linear headers but which
hold valid data.
This doesn't affect non-linear skbs which have all headers in a linear
head unless we must process the whole packet like in ogms or vis
packets.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / mv-sheeva.git / log