staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _Set_H2C_MSG and its handler

_Set_H2C_MSG command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _LedBlink and its handler

_LedBlink command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _SetChannelSwitch and its handler

_SetChannelSwitch command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove command _TDLS and its handler

_TDLS command is never issued by driver and its handler is a
dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_[cmd, mlme_ext].h: Remove unused command codes

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_setdatarate_cmd()

rtw_setdatarate_cmd() enqueue _SetDataRate command but there is not
handler mapped in wlancmds[] to handle this command.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_getbbrfreg_cmdrsp_callback()

rtw_getbbrfreg_cmdrsp_callback() is a callback for _Read_BBREG and _Read_RFREG
commands but these commands are never issued by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove members cmd_[allocated,]_buf from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused members rsp_[allocated, ]_buf from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member cmd_done_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member cmd_issued_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member rsp_cnt from struct cmd_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_dequeue_cmd() to rtw_dequeue_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_free_cmd_priv() to rtw_free_cmd_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename _rtw_init_cmd_priv() to rtw_init_cmd_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove wrapper function power_saving_wk_hdl()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove header file cmd_osdep.h

cmd_osdep.h is not required.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove struct Tx_Beacon_param

struct Tx_Beacon_param has only one member.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove struct [join, create]bss_parm

These two structures have only one member.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_cmd_clr_isr()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused structures

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused macros

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_createbss_cmd_ex()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setstandby_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setassocsta_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function rtw_tdls_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_set_csa_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_set_ch_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setrttbl_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_[set, get]rfreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_getbbreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setbbreg_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setphy_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_setbasicrate_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_c2h_wk_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_getrttbl_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_cmd.h: Remove unused macro and structure

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_hal_c2h_id_filter_ccx()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function rtw_hal_c2h_handler()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function c2h_evt_clear()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function c2h_evt_read()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function c2h_evt_hdl()

c2h_evt_hdl() calls a dummy function rtw_hal_c2h_handler() to handle events,
so no use of keeping it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove struct evt_priv and its uses

c2h_wk (work_struct) is naver scheduled to handle events,
so no use of keeping event data.
And also function rtw_hal_c2h_handler() responsible for handling c2h events,
is a dummy function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove P2P support

We've already removed non-standard ioctl handlers used by driver
to support P2P mode.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove mp( mesh point) mode support

We've already removed non-standard ioctl handlers, used by driver
to support mp mode.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove usb_osintf.h header file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove files rtw_mp_ioctl.[c,h]

files are not required after removal of private ioctl handlers.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove WEXT_PRIV private ioctl handlers

Remove WEXT_PRIV (non-standard) ioctl handlers.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: re-use hex_to_bin() instead of custom code

hex_to_bin could be used to convert hexdecimal digit to its binary
representation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: substitute custom hex2bin()

Instead of using custom code to convert hexdecinal strings to their binary
represantation let's use kernel's library function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: re-use mac_pton() helper

The helper mac_pton() validates and converts MAC address from string format to
a number. Originally code uses simple code to do that. With mac_pton() the
driver now validates input as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove #define _workitem struct work_struct

_workitem is just a #define for work_struct.  Remove the #define and
use struct work_struct directly instead.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _set_workitem()

The inline function _set_workitem() simply wraps schedule_work().  Removed.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _init_workitem()

The inline function _init_workitem() is just a wrapper around INIT_WORK().
Oddly, this wrapper accepts 3 parameters while INIT_WORK() only accepts 2.
The third parameter is unused.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: update staging removals and movements

3 sections have been deleted by various commits.  The other, echo, has
been moved to drivers/misc.

The nominal maintainers of the echo subsystem haven't been modifying the
code or acking/signing patches for several years, so don't keep the
section either.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: add missing blank lines after declarations

Fix "Missing blank line after declaration" warnings reported by
checkpatch.pl.

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Register's address offset notation update

In iowrite32() calls, the address of registers was expressed as e.g.
&ep->registers[fpga_msg_ctrl_reg]. This changes to the more common format
e.g. ep->registers + fpga_msg_ctrl_reg.

There is no functional change.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Reorganizing xilly_setupchannels()

Duplicate code in this function was moved into a new function,
xilly_get_dma_buffers().

There is no change in functionality.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Add sanity check in interrupt handler

Data arriving from the hardware is verified prior to its use. The lack of
this check has never been reported to cause a problem, but it's necessary
nevertheless.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Use net_device_stats from struct net_device

Instead of using an own copy of struct net_device_stats in struct
et131x_adapter, use stats from struct net_device.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use GFP_ATOMIC under spinlock

We're holding a spinlock here so we can't do sleeping allocations.
The call tree is:
  rtw_sta_flush() <-- takes spin_lock_bh(&pstapriv->asoc_list_lock);
  --> ap_free_sta()
      --> rtw_clearstakey_cmd()

Originally these calls were rtw_zmalloc() and then we switched them to
kzalloc() in fadbe0cd5292 ('staging: rtl8188eu:Remove rtw_zmalloc(),
wrapper for kzalloc()') and that made the bugs show up for my static
checker.  The original code was buggy as well but my static checker
couldn't parse it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: check the return value of kobject_set_name

Added a check of the return value of the kobject_set_name function.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000-usb: check for errors in card_send_command

kmalloc() result check was lacking. Fixing that required also
changing card_send_command() return type from void to int, and
checking its return code everywhere.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78561
Reported-by: Maksymilian Arciemowicz <max@cert.cx>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: Introduce the use of managed interfaces

This patch introduces the use of managed interfaces like devm_kzalloc,
devm_ioremap, dmam_alloc_coherent, devm_request_irq and does away with
the calls to functions to free the allocated memory in the probe and
remove functions. Also, the labels are removed in the probe function.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: remove unneccessary 'out of memory' message

Fix the following warning reported by checkpatch.pl:

WARNING: Possible unnecessary 'out of memory' message
811: FILE: drivers/staging/nvec/nvec.c:811

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: remove unnecessary 'else' after 'return' statement

Fix the following warning reported by checkpatch.pl:

WARNING: else is not generally useful after a break or return
235: FILE: drivers/staging/nvec/nvec.c:235

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: insert blank lines after declarations

This patch fixes coding style warnings reported by checkpatch.pl:
"Missing a blank line after declarations".

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant memset call

The brd is allocated by kzalloc() in dgnc_found_board()
so do not need to set 0 to member variable.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: removes unreachable code

dgnc_tty_ioctl() cannot reach the end of function.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix unsigned value for less than zero

The "un->un_open_count" is unsigned variable, so it cannot
be less than zero.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant null check for kfree()

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove redundant NULL check in dgap_tty_init()

The brd is already checked by earlier function in dgap_init_one().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: use kzalloc instead of kmalloc/memset

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unused waitqueues

dgap_dl_wait and kme_wait are not used in dgap.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unneccessary dgap_init_pci() function

The dgap_init_pci() calls only pci_register_driver().
It doesn't need to make a function for that.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Adds a blank line after declaration

clean up checkpatch.pl warning:
WARNING: Missing a blank line after declarations

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove "return" statement in void function

clean up checkpatch warning:
WARNING: void function return statements are not generally useful

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: fixed "foo* bar should be foo * bar" in dgap.c

clean up checkpatch.pl error:
ERROR: "foo* bar" should be "foo *bar"

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng/prism2fw.c: Add blank line after declarations

Fix checkpatch.pl warnings due to missing blank line after declarations

Signed-off-by: Matt Kurz <matt@ninezulu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Use net_device_stats from struct net_device

Instead of using an own copy of struct net_device_stats in struct
wlandevice, use stats from struct net_device. Also remove the thus
unnecessary .ndo_get_stats function, as it would now just return
netdev->stats, which is the default in dev_get_stats().

Furthermore, convert prefix increment of stats counters to the more
common postfix increment idiom.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: Remove unnecessary memset of netdev private data

The memory for struct net_device private data is allocated using
kzalloc/vzalloc in alloc_netdev_mqs, thus there is no need to zero it
again in the driver.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: Use net_device_stats from struct net_device

Instead of using an own copy of struct net_device_stats in struct nic,
use stats from struct net_device. Also remove the thus unnecessary
.ndo_get_stats function, as it would now just return netdev->stats,
which is the default in dev_get_stats().

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: add help text to Kconfig

The descriptions are provided by GCT Semiconductor, Inc.

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: remove unused code

Remove code surrounded by otherwise unused #define LOOPBACK_TEST

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: clean up endianness conversions

This patch cleans up the endianness conversions in the gdm72xx driver:
- Directly use the generic byte-reordering macros for endianness
  conversion instead of some custom-defined macros.
- Convert values on the constant side instead of the variable side when
  appropriate.
- Add endianness annotations.

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: use consistent style for header guards

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Fix build error

‘strict_strtol’ is deprecated. Use kstrtol instead. Fixes the following
build error:
drivers/staging/emxx_udc/emxx_udc.c:3288:3: error: implicit declaration of function ‘strict_strtol’

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192ee: Correct bitmask in comparsion

The issue is discovered by static checker. The proposed change (0x000c0
-> 0x000c) is likely correct because:
1. 16-bit `map` holds value coming from struct
ieee80211_vht_mcs_info.tx_mcs_map, which is described so: "TX MCS map 2
bits for each stream, total 8 streams". The changed code refers to case
of 2 TX streams, and 0x000c mask filters two bits related to the second
stream. Some codelines below 0x0003 mask is used to test first stream.
2. Mask 0x000c is used 3 more times in that place.
3. Specifying 5 digits of hex value is uncommon, especially while working
with `u16` variable. So likely the trailing zero is a typo.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78041
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Fix potential NULL pointer dereference

We need to make sure the struct rtllib_device pointer ieee is not NULL
after the goto rx_dropped label since it is dereferenced there.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: speakup_dectlk.c - use time_before_eq()

- this replaces jiffies comparision with safer function using
  time_after_eq()

Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192ee: Pass large struct by const reference

struct rtl_stats is rather huge (152 bytes), and since
rtl92ee_rx_command_packet() does not modify it, it might as
well be passed by const reference.

Reported by Coverity: CID 1222131

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Pass large struct by const reference

struct rtl_stats is rather huge (152 bytes), and since
rtl8812ae_rx_command_packet_handler() does not modify it, it might as
well be passed by const reference.

Reported by Coverity: CID 1167285

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: use ARRAY_SIZE instead of sizeof/sizeof[0]

use macro definition

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: use static const for seq_operations

lprocfs_stats_seq_sops is only used in static int lprocfs_stats_seq_open
with seq_open as const struct seq_operations *

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: fix endianness bug

wHubCharacteristics gets wrong value on big-endian CPUs.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: return transferred bytes only on success

Return transferred bytes only when transfer was successful.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: don't retry on data toggle error

On data toggle error, we don't know if and how many bytes were
successfully transferred by DMA. We should just fail the transaction
instead of trying a retry.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>