From 0091abc3a621f4acf41e35ea00a4ab4f064c2fb7 Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Fri, 9 Jun 2017 15:26:09 -0700 Subject: [PATCH] drm/i915/cnl: Enable loadgen_select bit for vswing sequence vswing programming sequence step 2 requires the Loadgen_select bit to be set in PORT_TX_DW4 lane reigsters per table defined by Bit rate and lane width. Implemented the change that was marked as FIXME in the driver. v2: (Rodrigo) checkpatch fixes. Signed-off-by: Clint Taylor Signed-off-by: Rodrigo Vivi Reviewed-by: Manasi Navare Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-12-git-send-email-rodrigo.vivi@intel.com --- drivers/gpu/drm/i915/intel_ddi.c | 38 +++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 9eb2940fc889..721c2e2c12a3 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1846,10 +1846,24 @@ static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv, I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val); } -static void cnl_ddi_vswing_sequence(struct drm_i915_private *dev_priv, - u32 level, enum port port, int type) +static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level) { + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = intel_ddi_get_encoder_port(encoder); + int type = encoder->type; + int width = 0; + int rate = 0; u32 val; + int ln = 0; + + if ((intel_dp) && (type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP)) { + width = intel_dp->lane_count; + rate = intel_dp->link_rate; + } else { + width = 4; + /* Rate is always < than 6GHz for HDMI */ + } /* * 1. If port type is eDP or DP, @@ -1865,8 +1879,21 @@ static void cnl_ddi_vswing_sequence(struct drm_i915_private *dev_priv, /* 2. Program loadgen select */ /* - * FIXME: Program PORT_TX_DW4_LN depending on Bit rate and used lanes + * Program PORT_TX_DW4_LN depending on Bit rate and used lanes + * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) + * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) + * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) */ + for (ln = 0; ln <= 3; ln++) { + val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln)); + val &= ~LOADGEN_SELECT; + + if (((rate < 600000) && (width == 4) && (ln >= 1)) || + ((rate < 600000) && (width < 4) && ((ln == 1) || (ln == 2)))) { + val |= LOADGEN_SELECT; + } + I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val); + } /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ val = I915_READ(CNL_PORT_CL1CM_DW5); @@ -1920,7 +1947,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp) else if (IS_GEN9_LP(dev_priv)) bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); else if (IS_CANNONLAKE(dev_priv)) { - cnl_ddi_vswing_sequence(dev_priv, level, port, encoder->type); + cnl_ddi_vswing_sequence(encoder, level); /* DDI_BUF_CTL bits 27:24 are reserved on CNL */ return 0; } @@ -2022,8 +2049,7 @@ static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, bxt_ddi_vswing_sequence(dev_priv, level, port, INTEL_OUTPUT_HDMI); else if (IS_CANNONLAKE(dev_priv)) - cnl_ddi_vswing_sequence(dev_priv, level, port, - INTEL_OUTPUT_HDMI); + cnl_ddi_vswing_sequence(encoder, level); intel_hdmi->set_infoframes(drm_encoder, has_hdmi_sink, -- 2.39.5