From 00aee095000c064cd77556050d08ed3f49f2af59 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 11 Nov 2014 20:00:09 +0100 Subject: [PATCH] net: phy: micrel: use BIT macro Use BIT macro for bitmask definitions. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 62ca9613a514..d962a2866bba 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -30,30 +30,30 @@ /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 -#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) -#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) -#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) +#define KSZPHY_OMSO_B_CAST_OFF BIT(9) +#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1) +#define KSZPHY_OMSO_MII_OVERRIDE BIT(0) /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B -#define KSZPHY_INTCS_JABBER (1 << 15) -#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) -#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) -#define KSZPHY_INTCS_PARELLEL (1 << 12) -#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) -#define KSZPHY_INTCS_LINK_DOWN (1 << 10) -#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) -#define KSZPHY_INTCS_LINK_UP (1 << 8) +#define KSZPHY_INTCS_JABBER BIT(15) +#define KSZPHY_INTCS_RECEIVE_ERR BIT(14) +#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13) +#define KSZPHY_INTCS_PARELLEL BIT(12) +#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11) +#define KSZPHY_INTCS_LINK_DOWN BIT(10) +#define KSZPHY_INTCS_REMOTE_FAULT BIT(9) +#define KSZPHY_INTCS_LINK_UP BIT(8) #define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ KSZPHY_INTCS_LINK_DOWN) /* general PHY control reg in vendor specific block. */ #define MII_KSZPHY_CTRL 0x1F /* bitmap of PHY register to set interrupt mode */ -#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) -#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) -#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) -#define KSZ8051_RMII_50MHZ_CLK (1 << 7) +#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9) +#define KSZ9021_CTRL_INT_ACTIVE_HIGH BIT(14) +#define KS8737_CTRL_INT_ACTIVE_HIGH BIT(14) +#define KSZ8051_RMII_50MHZ_CLK BIT(7) /* Write/read to/from extended registers */ #define MII_KSZPHY_EXTREG 0x0b @@ -400,8 +400,8 @@ static int ksz9031_config_init(struct phy_device *phydev) } #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 -#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) -#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) +#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6) +#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4) static int ksz8873mll_read_status(struct phy_device *phydev) { int regval; -- 2.39.5