From 01cb087e747538d6a831c3ab370a1e1fd4538d5c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 Dec 2006 12:00:03 +0100 Subject: [PATCH] [AVR32] Set flow handler for external interrupts Make sure that the flow handler for external interrupts is updated whenever they type is changed. Also make sure that the defaults correspond with how the interrupt controller is configured. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/extint.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index 4dff1f988900..b59272e81b9a 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -49,12 +49,25 @@ static void eim_unmask_irq(unsigned int irq) static int eim_set_irq_type(unsigned int irq, unsigned int flow_type) { struct at32_sm *sm = get_irq_chip_data(irq); + struct irq_desc *desc; unsigned int i = irq - sm->eim_first_irq; u32 mode, edge, level; unsigned long flags; int ret = 0; - flow_type &= IRQ_TYPE_SENSE_MASK; + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + desc = &irq_desc[irq]; + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + desc->status |= IRQ_LEVEL; + set_irq_handler(irq, handle_level_irq); + } else { + set_irq_handler(irq, handle_edge_irq); + } spin_lock_irqsave(&sm->lock, flags); @@ -148,10 +161,15 @@ static int __init eim_init(void) pattern = sm_readl(sm, EIM_MODE); nr_irqs = fls(pattern); + /* Trigger on falling edge unless overridden by driver */ + sm_writel(sm, EIM_MODE, 0UL); + sm_writel(sm, EIM_EDGE, 0UL); + sm->eim_chip = &eim_chip; for (i = 0; i < nr_irqs; i++) { - set_irq_chip(sm->eim_first_irq + i, &eim_chip); + set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip, + handle_edge_irq); set_irq_chip_data(sm->eim_first_irq + i, sm); } -- 2.39.5