From 0396310b0eba71595c1151ce7c8fde7a9f33f719 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Thu, 24 Jan 2013 03:45:10 +0000 Subject: [PATCH] input: ti_am33x_tsc: Add DT support This patch adds DT support to touch driver. It also provides a binding document which is used by the MFD and IIO part of the device. This patch also renames steps_to_configure to coordinate_readouts because the original name misleads the purpose of the variable. Signed-off-by: Pantelis Antoniou Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior --- .../bindings/input/touchscreen/ti-tsc-adc.txt | 44 ++++++++ drivers/input/touchscreen/ti_am335x_tsc.c | 105 ++++++++++++++---- drivers/mfd/ti_am335x_tscadc.c | 1 + 3 files changed, 127 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt new file mode 100644 index 000000000000..491c97b78384 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -0,0 +1,44 @@ +* TI - TSC ADC (Touschscreen and analog digital converter) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: +- child "tsc" + ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen + support on the platform. + ti,x-plate-resistance: X plate resistance + ti,coordiante-readouts: The sequencer supports a total of 16 + programmable steps each step is used to + read a single coordinate. A single + readout is enough but multiple reads can + increase the quality. + A value of 5 means, 5 reads for X, 5 for + Y and 2 for Z (always). This utilises 12 + of the 16 software steps available. The + remaining 4 can be used by the ADC. + ti,wire-config: Different boards could have a different order for + connecting wires on touchscreen. We need to provide an + 8 bit number where in the 1st four bits represent the + analog lines and the next 4 bits represent positive/ + negative terminal on that input line. Notations to + represent the input lines and terminals resoectively + is as follows: + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + XP = 0, XN = 1, YP = 2, YN = 3. +- child "adc" + ti,adc-channels: List of analog inputs available for ADC. + AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + +Example: + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordiante-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; + } diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 7b7de6035af7..449c0fbbe1d6 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include @@ -47,7 +49,7 @@ struct titsc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; - int steps_to_configure; + int coordinate_readouts; u32 config_inp[4]; u32 bit_xp, bit_xn, bit_yp, bit_yn; u32 inp_xp, inp_xn, inp_yp, inp_yn; @@ -123,7 +125,7 @@ static void titsc_step_config(struct titsc *ts_dev) int i, total_steps; /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; + total_steps = 2 * ts_dev->coordinate_readouts; config = STEPCONFIG_MODE_HWSYNC | STEPCONFIG_AVG_16 | ts_dev->bit_xp; @@ -141,7 +143,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = 1; i <= ts_dev->steps_to_configure; i++) { + for (i = 1; i <= ts_dev->coordinate_readouts; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -163,7 +165,7 @@ static void titsc_step_config(struct titsc *ts_dev) break; } - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + for (i = (ts_dev->coordinate_readouts + 1); i <= total_steps; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -218,7 +220,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO0); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { + if ((channel >= 0) && (channel < ts_dev->coordinate_readouts)) { read &= 0xfff; diff = abs(read - prev_val_x); if (diff < prev_diff_x) { @@ -231,8 +233,8 @@ static void titsc_read_coordinates(struct titsc *ts_dev, read = titsc_readl(ts_dev, REG_FIFO1); channel = read & 0xf0000; channel = channel >> 0x10; - if ((channel >= ts_dev->steps_to_configure) && - (channel < (2 * ts_dev->steps_to_configure - 1))) { + if ((channel >= ts_dev->coordinate_readouts) && + (channel < (2 * ts_dev->coordinate_readouts - 1))) { read &= 0xfff; diff = abs(read - prev_val_y); if (diff < prev_diff_y) { @@ -310,6 +312,59 @@ static irqreturn_t titsc_irq(int irq, void *dev) return IRQ_HANDLED; } +static int titsc_parse_dt(struct platform_device *pdev, + struct titsc *ts_dev) +{ + struct device_node *node = pdev->dev.of_node; + int err; + + if (!node) + return -EINVAL; + + err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); + if (err < 0) + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } + + err = of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); + if (err < 0) + return err; + + err = of_property_read_u32(node, "ti,coordiante-readouts", + &ts_dev->coordinate_readouts); + if (err < 0) + return err; + + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); +} + +static int titsc_parse_pdata(struct ti_tscadc_dev *tscadc_dev, + struct titsc *ts_dev) +{ + struct mfd_tscadc_board *pdata = tscadc_dev->dev->platform_data; + + if (!pdata) + return -EINVAL; + + ts_dev->wires = pdata->tsc_init->wires; + ts_dev->x_plate_resistance = + pdata->tsc_init->x_plate_resistance; + ts_dev->steps_to_configure = + pdata->tsc_init->steps_to_configure; + memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, + sizeof(pdata->tsc_init->wire_config)); + return 0; +} + /* * The functions for inserting/removing driver as a module. */ @@ -319,16 +374,8 @@ static int titsc_probe(struct platform_device *pdev) struct titsc *ts_dev; struct input_dev *input_dev; struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev); - struct mfd_tscadc_board *pdata; int err; - pdata = tscadc_dev->dev->platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "Could not find platform data\n"); - return -EINVAL; - } - /* Allocate memory for device */ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); input_dev = input_allocate_device(); @@ -342,11 +389,16 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; ts_dev->irq = tscadc_dev->irq; - ts_dev->wires = pdata->tsc_init->wires; - ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; - ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; - memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, - sizeof(pdata->tsc_init->wire_config)); + + if (tscadc_dev->dev->platform_data) + err = titsc_parse_pdata(tscadc_dev, ts_dev); + else + err = titsc_parse_dt(pdev, ts_dev); + + if (err) { + dev_err(&pdev->dev, "Could not find valid DT data.\n"); + goto err_free_mem; + } err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -362,7 +414,7 @@ static int titsc_probe(struct platform_device *pdev) goto err_free_irq; } titsc_step_config(ts_dev); - titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->coordinate_readouts); input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; @@ -398,7 +450,7 @@ static int titsc_remove(struct platform_device *pdev) free_irq(ts_dev->irq, ts_dev); /* total steps followed by the enable mask */ - steps = 2 * ts_dev->steps_to_configure + 2; + steps = 2 * ts_dev->coordinate_readouts + 2; steps = (1 << steps) - 1; am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps); @@ -439,7 +491,7 @@ static int titsc_resume(struct device *dev) } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, - ts_dev->steps_to_configure); + ts_dev->coordinate_readouts); return 0; } @@ -452,6 +504,12 @@ static const struct dev_pm_ops titsc_pm_ops = { #define TITSC_PM_OPS NULL #endif +static const struct of_device_id ti_tsc_dt_ids[] = { + { .compatible = "ti,am3359-tsc", }, + { } +}; +MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids); + static struct platform_driver ti_tsc_driver = { .probe = titsc_probe, .remove = titsc_remove, @@ -459,6 +517,7 @@ static struct platform_driver ti_tsc_driver = { .name = "tsc", .owner = THIS_MODULE, .pm = TITSC_PM_OPS, + .of_match_table = of_match_ptr(ti_tsc_dt_ids), }, }; module_platform_driver(ti_tsc_driver); diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 90ccfc07e16b..f50976623a01 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -203,6 +203,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) /* TSC Cell */ cell = &tscadc->cells[TSC_CELL]; cell->name = "tsc"; + cell->of_compatible = "ti,am3359-tsc"; cell->platform_data = &tscadc; cell->pdata_size = sizeof(tscadc); -- 2.39.5