From 03c33a4f002b2521debf1efc269cade983b6e86a Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Mon, 28 Apr 2008 02:15:38 -0700 Subject: [PATCH] fbdev: platforming metronomefb and am200epd This patch splits metronomefb into the platform independent metronomefb and the platform dependent am200epd. Signed-off-by: Jaya Kumar Cc: "Antonino A. Daplas" Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/metronomefb.txt | 16 +- drivers/video/Kconfig | 16 +- drivers/video/Makefile | 1 + drivers/video/am200epd.c | 295 +++++++++++++++++++++++++++++ drivers/video/metronomefb.c | 314 +++++-------------------------- include/video/metronomefb.h | 62 ++++++ 6 files changed, 422 insertions(+), 282 deletions(-) create mode 100644 drivers/video/am200epd.c create mode 100644 include/video/metronomefb.h diff --git a/Documentation/fb/metronomefb.txt b/Documentation/fb/metronomefb.txt index b9a2e7b7e838..237ca412582d 100644 --- a/Documentation/fb/metronomefb.txt +++ b/Documentation/fb/metronomefb.txt @@ -1,7 +1,7 @@ Metronomefb ----------- Maintained by Jaya Kumar -Last revised: Nov 20, 2007 +Last revised: Mar 10, 2008 Metronomefb is a driver for the Metronome display controller. The controller is from E-Ink Corporation. It is intended to be used to drive the E-Ink @@ -11,20 +11,18 @@ display media here http://www.e-ink.com/products/matrix/metronome.html . Metronome is interfaced to the host CPU through the AMLCD interface. The host CPU generates the control information and the image in a framebuffer which is then delivered to the AMLCD interface by a host specific method. -Currently, that's implemented for the PXA's LCDC controller. The display and -error status are each pulled through individual GPIOs. +The display and error status are each pulled through individual GPIOs. -Metronomefb was written for the PXA255/gumstix/lyre combination and -therefore currently has board set specific code in it. If other boards based on -other architectures are available, then the host specific code can be separated -and abstracted out. +Metronomefb is platform independent and depends on a board specific driver +to do all physical IO work. Currently, an example is implemented for the +PXA board used in the AM-200 EPD devkit. This example is am200epd.c Metronomefb requires waveform information which is delivered via the AMLCD interface to the metronome controller. The waveform information is expected to be delivered from userspace via the firmware class interface. The waveform file can be compressed as long as your udev or hotplug script is aware of the need -to uncompress it before delivering it. metronomefb will ask for waveform.wbf -which would typically go into /lib/firmware/waveform.wbf depending on your +to uncompress it before delivering it. metronomefb will ask for metronome.wbf +which would typically go into /lib/firmware/metronome.wbf depending on your udev/hotplug setup. I have only tested with a single waveform file which was originally labeled 23P01201_60_WT0107_MTC. I do not know what it stands for. Caution should be exercised when manipulating the waveform as there may be diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8da4683c5d20..ff6ea9a9be22 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -173,6 +173,11 @@ config FB_DEFERRED_IO depends on FB default y +config FB_METRONOME + tristate + depends on FB + depends on FB_DEFERRED_IO + config FB_SVGALIB tristate depends on FB @@ -1927,19 +1932,18 @@ config FB_XILINX framebuffer. ML300 carries a 640*480 LCD display on the board, ML403 uses a standard DB15 VGA connector. -config FB_METRONOME - tristate "Metronome display controller support" +config FB_AM200EPD + tristate "AM-200 E-Ink EPD devkit support" depends on FB && ARCH_PXA && MMU select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select FB_METRONOME help - This enables support for the Metronome display controller. Tested - with an E-Ink 800x600 display and Gumstix Connex through an AMLCD - interface. Please read - for more information. + This enables support for the Metronome display controller used on + the E-Ink AM-200 EPD devkit. config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 80d58425c641..04bca35403ff 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o # Hardware specific drivers go first obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o +obj-$(CONFIG_FB_AM200EPD) += am200epd.o obj-$(CONFIG_FB_ARC) += arcfb.o obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c new file mode 100644 index 000000000000..51e26c1f5e8b --- /dev/null +++ b/drivers/video/am200epd.c @@ -0,0 +1,295 @@ +/* + * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This work was made possible by help and equipment support from E-Ink + * Corporation. http://support.eink.com/community + * + * This driver is written to be used with the Metronome display controller. + * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600 + * Vizplex EPD on a Gumstix board using the Lyre interface board. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include