From 06947494bea31e536eba1d5c7d95791a9d2b5a99 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 2 Jun 2011 15:54:08 +0400 Subject: [PATCH] mtd: drop ceiva map driver It's a Ceiva/Polaroid PhotoMax Digital Picture Frame. Support for it was commited before 2.6.12-rc2, current git contains no functional changes since it's start. Driver containing MTD support for that board was broken for some time already. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Artem Bityutskiy --- drivers/mtd/maps/Kconfig | 8 - drivers/mtd/maps/Makefile | 1 - drivers/mtd/maps/ceiva.c | 341 -------------------------------------- 3 files changed, 350 deletions(-) delete mode 100644 drivers/mtd/maps/ceiva.c diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index c0c328c5b133..11cc2307c2ca 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -412,14 +412,6 @@ config MTD_IMPA7 This enables access to the NOR Flash on the impA7 board of implementa GmbH. If you have such a board, say 'Y' here. -config MTD_CEIVA - tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame" - depends on MTD_JEDECPROBE && ARCH_CEIVA - help - This enables access to the flash chips on the Ceiva/Polaroid - PhotoMax Digital Picture Frame. - If you have such a device, say 'Y'. - config MTD_H720X tristate "Hynix evaluation board mappings" depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index cb48b11affff..d6379fea42b8 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o obj-$(CONFIG_MTD_MBX860) += mbx860.o -obj-$(CONFIG_MTD_CEIVA) += ceiva.o obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c deleted file mode 100644 index 06f9c9815720..000000000000 --- a/drivers/mtd/maps/ceiva.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Ceiva flash memory driver. - * Copyright (C) 2002 Rob Scott - * - * Note: this driver supports jedec compatible devices. Modification - * for CFI compatible devices should be straight forward: change - * jedec_probe to cfi_probe. - * - * Based on: sa1100-flash.c, which has the following copyright: - * Flash memory access on SA11x0 based devices - * - * (C) 2000 Nicolas Pitre - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * This isn't complete yet, so... - */ -#define CONFIG_MTD_CEIVA_STATICMAP - -#ifdef CONFIG_MTD_CEIVA_STATICMAP -/* - * See include/linux/mtd/partitions.h for definition of the mtd_partition - * structure. - * - * Please note: - * 1. The flash size given should be the largest flash size that can - * be accommodated. - * - * 2. The bus width must defined in clps_setup_flash. - * - * The MTD layer will detect flash chip aliasing and reduce the size of - * the map accordingly. - * - */ - -#ifdef CONFIG_ARCH_CEIVA -/* Flash / Partition sizing */ -/* For the 28F8003, we use the block mapping to calcuate the sizes */ -#define MAX_SIZE_KiB (16 + 8 + 8 + 96 + (7*128)) -#define BOOT_PARTITION_SIZE_KiB (16) -#define PARAMS_PARTITION_SIZE_KiB (8) -#define KERNEL_PARTITION_SIZE_KiB (4*128) -/* Use both remaining portion of first flash, and all of second flash */ -#define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128) - -static struct mtd_partition ceiva_partitions[] = { - { - .name = "Ceiva BOOT partition", - .size = BOOT_PARTITION_SIZE_KiB*1024, - .offset = 0, - - },{ - .name = "Ceiva parameters partition", - .size = PARAMS_PARTITION_SIZE_KiB*1024, - .offset = (16 + 8) * 1024, - },{ - .name = "Ceiva kernel partition", - .size = (KERNEL_PARTITION_SIZE_KiB)*1024, - .offset = 0x20000, - - },{ - .name = "Ceiva root filesystem partition", - .offset = MTDPART_OFS_APPEND, - .size = (ROOT_PARTITION_SIZE_KiB)*1024, - } -}; -#endif - -static int __init clps_static_partitions(struct mtd_partition **parts) -{ - int nb_parts = 0; - -#ifdef CONFIG_ARCH_CEIVA - if (machine_is_ceiva()) { - *parts = ceiva_partitions; - nb_parts = ARRAY_SIZE(ceiva_partitions); - } -#endif - return nb_parts; -} -#endif - -struct clps_info { - unsigned long base; - unsigned long size; - int width; - void *vbase; - struct map_info *map; - struct mtd_info *mtd; - struct resource *res; -}; - -#define NR_SUBMTD 4 - -static struct clps_info info[NR_SUBMTD]; - -static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd) -{ - struct mtd_info *subdev[nr]; - struct map_info *maps; - int i, found = 0, ret = 0; - - /* - * Allocate the map_info structs in one go. - */ - maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL); - if (!maps) - return -ENOMEM; - /* - * Claim and then map the memory regions. - */ - for (i = 0; i < nr; i++) { - if (clps[i].base == (unsigned long)-1) - break; - - clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash"); - if (!clps[i].res) { - ret = -EBUSY; - break; - } - - clps[i].map = maps + i; - - clps[i].map->name = "clps flash"; - clps[i].map->phys = clps[i].base; - - clps[i].vbase = ioremap(clps[i].base, clps[i].size); - if (!clps[i].vbase) { - ret = -ENOMEM; - break; - } - - clps[i].map->virt = (void __iomem *)clps[i].vbase; - clps[i].map->bankwidth = clps[i].width; - clps[i].map->size = clps[i].size; - - simple_map_init(&clps[i].map); - - clps[i].mtd = do_map_probe("jedec_probe", clps[i].map); - if (clps[i].mtd == NULL) { - ret = -ENXIO; - break; - } - clps[i].mtd->owner = THIS_MODULE; - subdev[i] = clps[i].mtd; - - printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, " - "%d-bit\n", clps[i].base, clps[i].mtd->size >> 20, - clps[i].width * 8); - found += 1; - } - - /* - * ENXIO is special. It means we didn't find a chip when - * we probed. We need to tear down the mapping, free the - * resource and mark it as such. - */ - if (ret == -ENXIO) { - iounmap(clps[i].vbase); - clps[i].vbase = NULL; - release_resource(clps[i].res); - clps[i].res = NULL; - } - - /* - * If we found one device, don't bother with concat support. - * If we found multiple devices, use concat if we have it - * available, otherwise fail. - */ - if (ret == 0 || ret == -ENXIO) { - if (found == 1) { - *rmtd = subdev[0]; - ret = 0; - } else if (found > 1) { - /* - * We detected multiple devices. Concatenate - * them together. - */ - *rmtd = mtd_concat_create(subdev, found, - "clps flash"); - if (*rmtd == NULL) - ret = -ENXIO; - } - } - - /* - * If we failed, clean up. - */ - if (ret) { - do { - if (clps[i].mtd) - map_destroy(clps[i].mtd); - if (clps[i].vbase) - iounmap(clps[i].vbase); - if (clps[i].res) - release_resource(clps[i].res); - } while (i--); - - kfree(maps); - } - - return ret; -} - -static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd) -{ - int i; - - mtd_device_unregister(mtd); - - if (mtd != clps[0].mtd) - mtd_concat_destroy(mtd); - - for (i = NR_SUBMTD; i >= 0; i--) { - if (clps[i].mtd) - map_destroy(clps[i].mtd); - if (clps[i].vbase) - iounmap(clps[i].vbase); - if (clps[i].res) - release_resource(clps[i].res); - } - kfree(clps[0].map); -} - -/* - * We define the memory space, size, and width for the flash memory - * space here. - */ - -static int __init clps_setup_flash(void) -{ - int nr = 0; - -#ifdef CONFIG_ARCH_CEIVA - if (machine_is_ceiva()) { - info[0].base = CS0_PHYS_BASE; - info[0].size = SZ_32M; - info[0].width = CEIVA_FLASH_WIDTH; - info[1].base = CS1_PHYS_BASE; - info[1].size = SZ_32M; - info[1].width = CEIVA_FLASH_WIDTH; - nr = 2; - } -#endif - return nr; -} - -static struct mtd_partition *parsed_parts; -static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; - -static void __init clps_locate_partitions(struct mtd_info *mtd) -{ - const char *part_type = NULL; - int nr_parts = 0; - do { - /* - * Partition selection stuff. - */ - nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0); - if (nr_parts > 0) { - part_type = "command line"; - break; - } -#ifdef CONFIG_MTD_CEIVA_STATICMAP - nr_parts = clps_static_partitions(&parsed_parts); - if (nr_parts > 0) { - part_type = "static"; - break; - } - printk("found: %d partitions\n", nr_parts); -#endif - } while (0); - - if (nr_parts == 0) { - printk(KERN_NOTICE "clps flash: no partition info " - "available, registering whole flash\n"); - mtd_device_register(mtd, NULL, 0); - } else { - printk(KERN_NOTICE "clps flash: using %s partition " - "definition\n", part_type); - mtd_device_register(mtd, parsed_parts, nr_parts); - } - - /* Always succeeds. */ -} - -static void __exit clps_destroy_partitions(void) -{ - kfree(parsed_parts); -} - -static struct mtd_info *mymtd; - -static int __init clps_mtd_init(void) -{ - int ret; - int nr; - - nr = clps_setup_flash(); - if (nr < 0) - return nr; - - ret = clps_setup_mtd(info, nr, &mymtd); - if (ret) - return ret; - - clps_locate_partitions(mymtd); - - return 0; -} - -static void __exit clps_mtd_cleanup(void) -{ - clps_destroy_mtd(info, mymtd); - clps_destroy_partitions(); -} - -module_init(clps_mtd_init); -module_exit(clps_mtd_cleanup); - -MODULE_AUTHOR("Rob Scott"); -MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver"); -MODULE_LICENSE("GPL"); -- 2.39.5