From 073754dd9e12b6504accb70da83530b65fe46c20 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 19 Apr 2013 13:29:48 +0200 Subject: [PATCH] ARM: shmobile: mackerel: Register pinctrl mapping for FSI Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-mackerel.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 955fefd3e369..f2e8740f44a4 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1328,6 +1328,16 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "flctl_ce0", "flctl"), PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", "flctl_ctrl", "flctl"), + /* FSIA (AK4643) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", + "fsia_data_out", "fsia"), + /* FSIB (HDMI) */ + PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", + "fsib_mclk_in", "fsib"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_data4", "sdhi0"), @@ -1446,11 +1456,7 @@ static void __init mackerel_init(void) gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* FSI2 port A (ak4643) */ gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(9, NULL); @@ -1460,8 +1466,7 @@ static void __init mackerel_init(void) intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); + /* FSI2 port B (HDMI) */ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ /* set SPU2 clock to 119.6 MHz */ -- 2.39.5