From 07bb46be5306d27c8d8ce7b287688554b9ca1569 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Mon, 29 Feb 2016 17:04:05 -0500 Subject: [PATCH] rtl8xxxu: Init page boundaries before starting the firmware This reorganizes the device initialization to init page boundaries before starting the firmware. This matches the flow in the 8192eu vendor driver. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 68 +++++++++---------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index b2e4eac4d14f..65994e938a17 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -4313,6 +4313,40 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) goto exit; } + dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); + if (!macpower) { + if (priv->ep_tx_normal_queue) + val8 = TX_PAGE_NUM_NORM_PQ; + else + val8 = 0; + + rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); + + val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD; + + if (priv->ep_tx_high_queue) + val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); + if (priv->ep_tx_low_queue) + val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); + + rtl8xxxu_write32(priv, REG_RQPN, val32); + + /* + * Set TX buffer boundary + */ + val8 = TX_TOTAL_PAGE_NUM + 1; + rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); + rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); + rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8); + rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8); + rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8); + } + + ret = rtl8xxxu_init_queue_priority(priv); + dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); + if (ret) + goto exit; + dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); if (!macpower) { ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); @@ -4392,40 +4426,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) priv->rf_mode_ag[0] = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG); - dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); - if (!macpower) { - if (priv->ep_tx_normal_queue) - val8 = TX_PAGE_NUM_NORM_PQ; - else - val8 = 0; - - rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); - - val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD; - - if (priv->ep_tx_high_queue) - val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); - if (priv->ep_tx_low_queue) - val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); - - rtl8xxxu_write32(priv, REG_RQPN, val32); - - /* - * Set TX buffer boundary - */ - val8 = TX_TOTAL_PAGE_NUM + 1; - rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); - rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); - rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8); - rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8); - rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8); - } - - ret = rtl8xxxu_init_queue_priority(priv); - dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); - if (ret) - goto exit; - /* * Set RX page boundary */ -- 2.39.5