From 085d888773632ab757d6cb1e207f6a102feca9a1 Mon Sep 17 00:00:00 2001
From: Philipp Zabel
Date: Mon, 26 May 2014 14:42:56 +0200
Subject: [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator
The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
to power the KSZ9031 PHY DVDDH input and to pull the necessary
pins (including bootstrap pins) high.
It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.
Signed-off-by: Philipp Zabel
Signed-off-by: Shawn Guo
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index faa3494a69d4..2694aa84e187 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -301,6 +301,7 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
--
2.39.5