From 0a0752c6ee58f28a29e78f1a8c38f2f1b11cba9f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Date: Sun, 14 Sep 2014 09:22:45 +0900 Subject: [PATCH] ARM: dts: update display related nodes for exynos5800-peach-pi Add DT nodes for panel-simple "auo,b133htn01" panel. Add backlight enable pin and backlight power supply for pwm-backlight. Also, add panel phandle needed by dp to enable display on peach_pi. Signed-off-by: Ajay Kumar Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5800-peach-pi.dts | 27 +++++++++-------------- 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 025a09577414..1d31c8132558 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,11 +29,13 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -99,6 +101,12 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b133htn01"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; }; &adc { @@ -117,22 +125,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; - }; + panel = <&panel>; }; &fimd { -- 2.39.5