From 0be7d969b0efef085ed6497d462ba16a875ca737 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Tue, 24 Dec 2013 15:12:11 +0800 Subject: [PATCH] powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M When booting above the 64M for a secondary cpu, we also face the same issue as the boot cpu that the PAGE_OFFSET map two different physical address for the init tlb and the final map. So we have to use switch_to_as1/restore_to_as0 between the conversion of these two maps. When restoring to as0 for a secondary cpu, we only need to return to the caller. So add a new parameter for function restore_to_as0 for this purpose. Use LOAD_REG_ADDR_PIC to get the address of variables which may be used before we set the final map in cams for the secondary cpu. Move the setting of cams a bit earlier in order to avoid the unnecessary using of LOAD_REG_ADDR_PIC. Signed-off-by: Kevin Hao Signed-off-by: Scott Wood --- arch/powerpc/kernel/head_fsl_booke.S | 41 +++++++++++++++++++--------- arch/powerpc/mm/fsl_booke_mmu.c | 4 +-- arch/powerpc/mm/mmu_decl.h | 2 +- arch/powerpc/mm/tlb_nohash_low.S | 4 ++- 4 files changed, 34 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index b1f7edc3c360..b497188a94a1 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -216,8 +216,7 @@ set_ivor: /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - lis r24, boot_cpuid@h - ori r24, r24, boot_cpuid@l + LOAD_REG_ADDR_PIC(r24, boot_cpuid) lwz r24, 0(r24) cmpwi r24, -1 mfspr r24,SPRN_PIR @@ -1146,24 +1145,36 @@ _GLOBAL(__flush_disable_L1) /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start __secondary_start: - lis r3,__secondary_hold_acknowledge@h - ori r3,r3,__secondary_hold_acknowledge@l - stw r24,0(r3) - - li r3,0 - mr r4,r24 /* Why? */ - bl call_setup_cpu - - lis r3,tlbcam_index@ha - lwz r3,tlbcam_index@l(r3) + LOAD_REG_ADDR_PIC(r3, tlbcam_index) + lwz r3,0(r3) mtctr r3 li r26,0 /* r26 safe? */ + bl switch_to_as1 + mr r27,r3 /* tlb entry */ /* Load each CAM entry */ 1: mr r3,r26 bl loadcam_entry addi r26,r26,1 bdnz 1b + mr r3,r27 /* tlb entry */ + LOAD_REG_ADDR_PIC(r4, memstart_addr) + lwz r4,0(r4) + mr r5,r25 /* phys kernel start */ + rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ + subf r4,r5,r4 /* memstart_addr - phys kernel start */ + li r5,0 /* no device tree */ + li r6,0 /* not boot cpu */ + bl restore_to_as0 + + + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1253,6 +1264,7 @@ _GLOBAL(switch_to_as1) * r3 - the tlb entry which should be invalidated * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0) * r5 - device tree virtual address. If r4 is 0, r5 is ignored. + * r6 - boot cpu */ _GLOBAL(restore_to_as0) mflr r0 @@ -1268,6 +1280,7 @@ _GLOBAL(restore_to_as0) */ add r9,r9,r4 add r5,r5,r4 + add r0,r0,r4 2: mfmsr r7 li r8,(MSR_IS | MSR_DS) @@ -1290,7 +1303,9 @@ _GLOBAL(restore_to_as0) isync cmpwi r4,0 - bne 3f + cmpwi cr1,r6,0 + cror eq,4*cr1+eq,eq + bne 3f /* offset != 0 && is_boot_cpu */ mtlr r0 blr diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 95deb9fdf92f..a68671c18ad4 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -231,7 +231,7 @@ void __init adjust_total_lowmem(void) i = switch_to_as1(); __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); - restore_to_as0(i, 0, 0); + restore_to_as0(i, 0, 0, 1); pr_info("Memory CAM mapping: "); for (i = 0; i < tlbcam_index - 1; i++) @@ -302,7 +302,7 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) else map_mem_in_cams_addr(start, PAGE_OFFSET + offset, 0x4000000, CONFIG_LOWMEM_CAM_NUM); - restore_to_as0(n, offset, __va(dt_ptr)); + restore_to_as0(n, offset, __va(dt_ptr), 1); /* We should never reach here */ panic("Relocation error"); } diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 91da910210cb..9615d82919b8 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -149,7 +149,7 @@ extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); extern int switch_to_as1(void); -extern void restore_to_as0(int esel, int offset, void *dt_ptr); +extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); #endif extern void loadcam_entry(unsigned int index); diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 626ad081639f..43ff3c797fbf 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -402,7 +402,9 @@ _GLOBAL(set_context) * Load TLBCAM[index] entry in to the L2 CAM MMU */ _GLOBAL(loadcam_entry) - LOAD_REG_ADDR(r4, TLBCAM) + mflr r5 + LOAD_REG_ADDR_PIC(r4, TLBCAM) + mtlr r5 mulli r5,r3,TLBCAM_SIZE add r3,r5,r4 lwz r4,TLBCAM_MAS0(r3) -- 2.39.5