From 0c1747a24855f6ce9668283be0b6839f4c0ab4cf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 23 Mar 2016 23:14:16 +0100 Subject: [PATCH] ARM: dts: sun8i: Base Orange Pi Plus dts on the Orange Pi 2 dts The Orange Pi Plus really is an Orange Pi 2 extended with: 1) A sata <-> usb bridge connected to ehci3 2) An eMMC on mmc2 3) An external gigabit ethernet phy instead of the integrated 100Mbit phy This commit changes the dts to reflect this by making it include the Orange Pi 2 dts and then adding the extra bits. Note that the difference in ethernet phy is not taken into account because we do not have an ethernet driver for the H3 yet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 136 +------------------ 1 file changed, 2 insertions(+), 134 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 94f8b0b834cd..b0cb41787e09 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -40,61 +40,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ +#include "sun8i-h3-orangepi-2.dts" / { model = "Xunlong Orange Pi Plus"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - status_led { - label = "orangepi-plus:red:status"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - - pwr_led { - label = "orangepi-plus:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - r_gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; - - sw2 { - label = "sw2"; - linux,code = ; - gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; - }; - - sw4 { - label = "sw4"; - linux,code = ; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; - reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -106,49 +58,12 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ - }; -}; - -&ehci1 { - status = "okay"; }; &ehci3 { status = "okay"; }; -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; - vmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -167,13 +82,6 @@ }; &pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - usb3_vbus_pin_a: usb3_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; @@ -182,46 +90,6 @@ }; }; -&r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -®_usb1_vbus { - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; -}; - &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; usb3_vbus-supply = <®_usb3_vbus>; - status = "okay"; }; -- 2.39.5