From 0c76706967dd15b58dfc132d1dc46e13edb86424 Mon Sep 17 00:00:00 2001 From: Haneen Mohammed Date: Sun, 22 Mar 2015 21:23:23 +0300 Subject: [PATCH] Staging: iio: use the BIT macro in .h files This patch replace bit shifting on 1, 2, and 3 with the BIT(x) macro. Issue addressed by checkpatch.pl with --strict flag. This was done with the help of Coccninelle: @r1@ constant int g; @@ ( 0< Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/accel/adis16201.h | 18 ++++++------ drivers/staging/iio/accel/adis16203.h | 24 ++++++++-------- drivers/staging/iio/accel/adis16204.h | 22 +++++++-------- drivers/staging/iio/accel/adis16209.h | 22 +++++++-------- drivers/staging/iio/accel/adis16220.h | 40 +++++++++++++-------------- drivers/staging/iio/accel/adis16240.h | 30 ++++++++++---------- drivers/staging/iio/adc/ad7280a.h | 8 +++--- 7 files changed, 82 insertions(+), 82 deletions(-) diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h index 8747de5a9805..e6b8c9af6e22 100644 --- a/drivers/staging/iio/accel/adis16201.h +++ b/drivers/staging/iio/accel/adis16201.h @@ -34,24 +34,24 @@ #define ADIS16201_GLOB_CMD 0x3E /* Operation, system command register */ /* MSC_CTRL */ -#define ADIS16201_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */ -#define ADIS16201_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16201_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */ +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ /* DIAG_STAT */ -#define ADIS16201_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16201_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ #define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ #define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */ #define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */ #define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */ /* GLOB_CMD */ -#define ADIS16201_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16201_GLOB_CMD_FACTORY_CAL (1<<1) +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16201_ERROR_ACTIVE (1<<14) +#define ADIS16201_ERROR_ACTIVE BIT(14) enum adis16201_scan { ADIS16201_SCAN_ACC_X, diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h index acc688d7ea9e..6426e38bf006 100644 --- a/drivers/staging/iio/accel/adis16203.h +++ b/drivers/staging/iio/accel/adis16203.h @@ -25,16 +25,16 @@ #define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */ /* MSC_CTRL */ -#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */ -#define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */ -#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ +#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ +#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9) /* Reverses rotation of both inclination outputs */ +#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */ +#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ /* DIAG_STAT */ -#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16203_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16203_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ #define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */ #define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ #define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */ @@ -42,11 +42,11 @@ #define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */ /* GLOB_CMD */ -#define ADIS16203_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16203_GLOB_CMD_CLEAR_STAT (1<<4) -#define ADIS16203_GLOB_CMD_FACTORY_CAL (1<<1) +#define ADIS16203_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16203_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16203_ERROR_ACTIVE (1<<14) +#define ADIS16203_ERROR_ACTIVE BIT(14) enum adis16203_scan { ADIS16203_SCAN_INCLI_X, diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 9ff950c1e8db..0b23f0b5c52f 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -33,15 +33,15 @@ #define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */ /* MSC_CTRL */ -#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16204_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */ -#define ADIS16204_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16204_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 (1 << 0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ +#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ +#define ADIS16204_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */ +#define ADIS16204_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16204_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ /* DIAG_STAT */ -#define ADIS16204_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16204_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ #define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */ #define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ @@ -50,11 +50,11 @@ #define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 2.975 V */ /* GLOB_CMD */ -#define ADIS16204_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16204_GLOB_CMD_CLEAR_STAT (1<<4) -#define ADIS16204_GLOB_CMD_FACTORY_CAL (1<<1) +#define ADIS16204_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16204_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16204_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16204_ERROR_ACTIVE (1<<14) +#define ADIS16204_ERROR_ACTIVE BIT(14) enum adis16204_scan { ADIS16204_SCAN_ACC_X, diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h index ad3945a06292..813698d18ec8 100644 --- a/drivers/staging/iio/accel/adis16209.h +++ b/drivers/staging/iio/accel/adis16209.h @@ -60,21 +60,21 @@ /* MSC_CTRL */ /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) +#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test enable */ -#define ADIS16209_MSC_CTRL_SELF_TEST_EN (1 << 8) +#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16209_MSC_CTRL_DATA_RDY_EN (1 << 2) +#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16209_MSC_CTRL_ACTIVE_HIGH (1 << 1) +#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ -#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 (1 << 0) +#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* DIAG_STAT */ /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM2 (1<<9) +#define ADIS16209_DIAG_STAT_ALARM2 BIT(9) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM1 (1<<8) +#define ADIS16209_DIAG_STAT_ALARM1 BIT(8) /* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */ #define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* SPI communications failure */ @@ -87,11 +87,11 @@ #define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0 /* GLOB_CMD */ -#define ADIS16209_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16209_GLOB_CMD_CLEAR_STAT (1<<4) -#define ADIS16209_GLOB_CMD_FACTORY_CAL (1<<1) +#define ADIS16209_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16209_ERROR_ACTIVE (1<<14) +#define ADIS16209_ERROR_ACTIVE BIT(14) #define ADIS16209_SCAN_SUPPLY 0 #define ADIS16209_SCAN_ACC_X 1 diff --git a/drivers/staging/iio/accel/adis16220.h b/drivers/staging/iio/accel/adis16220.h index a894ad7fb26d..eab86331124f 100644 --- a/drivers/staging/iio/accel/adis16220.h +++ b/drivers/staging/iio/accel/adis16220.h @@ -71,35 +71,35 @@ #define ADIS16220_CAPTURE_SIZE 2048 /* MSC_CTRL */ -#define ADIS16220_MSC_CTRL_SELF_TEST_EN (1 << 8) -#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN1 (1 << 1) -#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN2 (1 << 0) +#define ADIS16220_MSC_CTRL_SELF_TEST_EN BIT(8) +#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN1 BIT(1) +#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN2 BIT(0) /* DIO_CTRL */ -#define ADIS16220_MSC_CTRL_DIO2_BUSY_IND (3<<4) -#define ADIS16220_MSC_CTRL_DIO1_BUSY_IND (3<<2) -#define ADIS16220_MSC_CTRL_DIO2_ACT_HIGH (1<<1) -#define ADIS16220_MSC_CTRL_DIO1_ACT_HIGH (1<<0) +#define ADIS16220_MSC_CTRL_DIO2_BUSY_IND (BIT(5) | BIT(4)) +#define ADIS16220_MSC_CTRL_DIO1_BUSY_IND (BIT(3) | BIT(2)) +#define ADIS16220_MSC_CTRL_DIO2_ACT_HIGH BIT(1) +#define ADIS16220_MSC_CTRL_DIO1_ACT_HIGH BIT(0) /* DIAG_STAT */ /* AIN2 sample > ALM_MAG2 */ -#define ADIS16220_DIAG_STAT_ALM_MAG2 (1<<14) +#define ADIS16220_DIAG_STAT_ALM_MAG2 BIT(14) /* AIN1 sample > ALM_MAG1 */ -#define ADIS16220_DIAG_STAT_ALM_MAG1 (1<<13) +#define ADIS16220_DIAG_STAT_ALM_MAG1 BIT(13) /* Acceleration sample > ALM_MAGA */ -#define ADIS16220_DIAG_STAT_ALM_MAGA (1<<12) +#define ADIS16220_DIAG_STAT_ALM_MAGA BIT(12) /* Error condition programmed into ALM_MAGS[11:0] and ALM_CTRL[5:4] is true */ -#define ADIS16220_DIAG_STAT_ALM_MAGS (1<<11) +#define ADIS16220_DIAG_STAT_ALM_MAGS BIT(11) /* |Peak value in AIN2 data capture| > ALM_MAG2 */ -#define ADIS16220_DIAG_STAT_PEAK_AIN2 (1<<10) +#define ADIS16220_DIAG_STAT_PEAK_AIN2 BIT(10) /* |Peak value in AIN1 data capture| > ALM_MAG1 */ -#define ADIS16220_DIAG_STAT_PEAK_AIN1 (1<<9) +#define ADIS16220_DIAG_STAT_PEAK_AIN1 BIT(9) /* |Peak value in acceleration data capture| > ALM_MAGA */ -#define ADIS16220_DIAG_STAT_PEAK_ACCEL (1<<8) +#define ADIS16220_DIAG_STAT_PEAK_ACCEL BIT(8) /* Data ready, capture complete */ -#define ADIS16220_DIAG_STAT_DATA_RDY (1<<7) -#define ADIS16220_DIAG_STAT_FLASH_CHK (1<<6) -#define ADIS16220_DIAG_STAT_SELF_TEST (1<<5) +#define ADIS16220_DIAG_STAT_DATA_RDY BIT(7) +#define ADIS16220_DIAG_STAT_FLASH_CHK BIT(6) +#define ADIS16220_DIAG_STAT_SELF_TEST BIT(5) /* Capture period violation/interruption */ #define ADIS16220_DIAG_STAT_VIOLATION_BIT 4 /* SPI communications failure */ @@ -112,9 +112,9 @@ #define ADIS16220_DIAG_STAT_POWER_LOW_BIT 0 /* GLOB_CMD */ -#define ADIS16220_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16220_GLOB_CMD_SELF_TEST (1<<2) -#define ADIS16220_GLOB_CMD_PWR_DOWN (1<<1) +#define ADIS16220_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16220_GLOB_CMD_SELF_TEST BIT(2) +#define ADIS16220_GLOB_CMD_PWR_DOWN BIT(1) #define ADIS16220_MAX_TX 2048 #define ADIS16220_MAX_RX 2048 diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h index d442d49f51f4..66b5ad2f42c5 100644 --- a/drivers/staging/iio/accel/adis16240.h +++ b/drivers/staging/iio/accel/adis16240.h @@ -74,31 +74,31 @@ /* MSC_CTRL */ /* Enables sum-of-squares output (XYZPEAK_OUT) */ -#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN (1 << 15) +#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN BIT(15) /* Enables peak tracking output (XPEAK_OUT, YPEAK_OUT, and ZPEAK_OUT) */ -#define ADIS16240_MSC_CTRL_X_Y_ZPEAK_OUT_EN (1 << 14) +#define ADIS16240_MSC_CTRL_X_Y_ZPEAK_OUT_EN BIT(14) /* Self-test enable: 1 = apply electrostatic force, 0 = disabled */ -#define ADIS16240_MSC_CTRL_SELF_TEST_EN (1 << 8) +#define ADIS16240_MSC_CTRL_SELF_TEST_EN BIT(8) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16240_MSC_CTRL_DATA_RDY_EN (1 << 2) +#define ADIS16240_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16240_MSC_CTRL_ACTIVE_HIGH (1 << 1) +#define ADIS16240_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ -#define ADIS16240_MSC_CTRL_DATA_RDY_DIO2 (1 << 0) +#define ADIS16240_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* DIAG_STAT */ /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16240_DIAG_STAT_ALARM2 (1<<9) +#define ADIS16240_DIAG_STAT_ALARM2 BIT(9) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16240_DIAG_STAT_ALARM1 (1<<8) +#define ADIS16240_DIAG_STAT_ALARM1 BIT(8) /* Capture buffer full: 1 = capture buffer is full */ -#define ADIS16240_DIAG_STAT_CPT_BUF_FUL (1<<7) +#define ADIS16240_DIAG_STAT_CPT_BUF_FUL BIT(7) /* Flash test, checksum flag: 1 = mismatch, 0 = match */ -#define ADIS16240_DIAG_STAT_CHKSUM (1<<6) +#define ADIS16240_DIAG_STAT_CHKSUM BIT(6) /* Power-on, self-test flag: 1 = failure, 0 = pass */ #define ADIS16240_DIAG_STAT_PWRON_FAIL_BIT 5 /* Power-on self-test: 1 = in-progress, 0 = complete */ -#define ADIS16240_DIAG_STAT_PWRON_BUSY (1<<4) +#define ADIS16240_DIAG_STAT_PWRON_BUSY BIT(4) /* SPI communications failure */ #define ADIS16240_DIAG_STAT_SPI_FAIL_BIT 3 /* Flash update failure */ @@ -109,11 +109,11 @@ #define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0 /* GLOB_CMD */ -#define ADIS16240_GLOB_CMD_RESUME (1<<8) -#define ADIS16240_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16240_GLOB_CMD_STANDBY (1<<2) +#define ADIS16240_GLOB_CMD_RESUME BIT(8) +#define ADIS16240_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16240_GLOB_CMD_STANDBY BIT(2) -#define ADIS16240_ERROR_ACTIVE (1<<14) +#define ADIS16240_ERROR_ACTIVE BIT(14) /* At the moment triggers are only used for ring buffer * filling. This may change! diff --git a/drivers/staging/iio/adc/ad7280a.h b/drivers/staging/iio/adc/ad7280a.h index 20400b0045e5..732347a9bce4 100644 --- a/drivers/staging/iio/adc/ad7280a.h +++ b/drivers/staging/iio/adc/ad7280a.h @@ -23,10 +23,10 @@ #define AD7280A_CONV_AVG_4 2 #define AD7280A_CONV_AVG_8 3 -#define AD7280A_ALERT_REMOVE_VIN5 (1 << 2) -#define AD7280A_ALERT_REMOVE_VIN4_VIN5 (2 << 2) -#define AD7280A_ALERT_REMOVE_AUX5 (1 << 0) -#define AD7280A_ALERT_REMOVE_AUX4_AUX5 (2 << 0) +#define AD7280A_ALERT_REMOVE_VIN5 BIT(2) +#define AD7280A_ALERT_REMOVE_VIN4_VIN5 BIT(3) +#define AD7280A_ALERT_REMOVE_AUX5 BIT(0) +#define AD7280A_ALERT_REMOVE_AUX4_AUX5 BIT(1) struct ad7280_platform_data { unsigned acquisition_time; -- 2.39.5