From 14a7b416434a8076afb2dea8bb51c6514b41a47b Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 15 Sep 2015 18:32:58 +0800 Subject: [PATCH] mmc: sdhci: call sdhci_init() before request irq sdhci_init() will clear all irqs and set the needed irqs. So logically sdhci_init() should be called before request irq. If not, some irqs may be triggled and handled wrongly. Take the following into consideration, after request irq, if SDIO card interrupt enabled, a sd card in the sd slot will trigger a mass of interrupt(SDHCI_INT_CARD_INT), because at this time, the vmmc-regulator still not restore, no voltage supply for the sd card, so the pin of data0~data3 change and keep low, interrupt(SDHCI_INT_CARD_INT) will rise up ceaselessly. Due to we already reguest irq, system will be busy in handling this endless irq, can't response to other event. So we should call sdhci_init() before request irq in sd resume. Signed-off-by: Haibo Chen Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fbc7efdddcb5..2cadf0891f15 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2716,17 +2716,6 @@ int sdhci_resume_host(struct sdhci_host *host) host->ops->enable_dma(host); } - if (!device_may_wakeup(mmc_dev(host->mmc))) { - ret = request_threaded_irq(host->irq, sdhci_irq, - sdhci_thread_irq, IRQF_SHARED, - mmc_hostname(host->mmc), host); - if (ret) - return ret; - } else { - sdhci_disable_irq_wakeups(host); - disable_irq_wake(host->irq); - } - if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { /* Card keeps power but host controller does not */ @@ -2739,6 +2728,17 @@ int sdhci_resume_host(struct sdhci_host *host) mmiowb(); } + if (!device_may_wakeup(mmc_dev(host->mmc))) { + ret = request_threaded_irq(host->irq, sdhci_irq, + sdhci_thread_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); + if (ret) + return ret; + } else { + sdhci_disable_irq_wakeups(host); + disable_irq_wake(host->irq); + } + sdhci_enable_card_detection(host); return ret; -- 2.39.2