From 1623267ab40fb52e33b889cdb5c8b796be454a20 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 16:06:00 +0200 Subject: [PATCH] Staging: rt2860: remove DOT11_N_SUPPORT ifdefs Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/Makefile | 1 - drivers/staging/rt2860/ap.h | 2 - drivers/staging/rt2860/chlist.h | 8 -- drivers/staging/rt2860/common/action.c | 8 -- drivers/staging/rt2860/common/ba_action.c | 5 -- drivers/staging/rt2860/common/cmm_data.c | 38 +-------- drivers/staging/rt2860/common/cmm_info.c | 32 +------- drivers/staging/rt2860/common/cmm_sanity.c | 2 - drivers/staging/rt2860/common/cmm_sync.c | 9 --- drivers/staging/rt2860/common/mlme.c | 94 ++-------------------- drivers/staging/rt2860/common/rtmp_init.c | 15 +--- drivers/staging/rt2860/common/spectrum.c | 4 +- drivers/staging/rt2860/oid.h | 2 - drivers/staging/rt2860/rt_linux.c | 2 - drivers/staging/rt2860/rt_main_dev.c | 17 ---- drivers/staging/rt2860/rt_profile.c | 9 --- drivers/staging/rt2860/rtmp.h | 66 +-------------- drivers/staging/rt2860/rtmp_def.h | 10 +-- drivers/staging/rt2860/sta/assoc.c | 11 +-- drivers/staging/rt2860/sta/connect.c | 39 ++------- drivers/staging/rt2860/sta/rtmp_data.c | 22 +---- drivers/staging/rt2860/sta/sanity.c | 2 - drivers/staging/rt2860/sta/sync.c | 36 ++------- drivers/staging/rt2860/sta_ioctl.c | 44 +--------- 24 files changed, 35 insertions(+), 443 deletions(-) diff --git a/drivers/staging/rt2860/Makefile b/drivers/staging/rt2860/Makefile index 4d2b6b029ca4..6b033cda1d31 100644 --- a/drivers/staging/rt2860/Makefile +++ b/drivers/staging/rt2860/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_RT2860) += rt2860sta.o # TODO: all of these should be removed EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT EXTRA_CFLAGS += -DDBG -EXTRA_CFLAGS += -DDOT11_N_SUPPORT rt2860sta-objs := \ common/md5.o \ diff --git a/drivers/staging/rt2860/ap.h b/drivers/staging/rt2860/ap.h index 56dc67779e70..2da13abb14cc 100644 --- a/drivers/staging/rt2860/ap.h +++ b/drivers/staging/rt2860/ap.h @@ -400,10 +400,8 @@ VOID ApLogEvent( IN PUCHAR pAddr, IN USHORT Event); -#ifdef DOT11_N_SUPPORT VOID APUpdateOperationMode( IN PRTMP_ADAPTER pAd); -#endif // DOT11_N_SUPPORT // VOID APUpdateCapabilityAndErpIe( IN PRTMP_ADAPTER pAd); diff --git a/drivers/staging/rt2860/chlist.h b/drivers/staging/rt2860/chlist.h index 9e15b9daeb80..60f8548a57ea 100644 --- a/drivers/staging/rt2860/chlist.h +++ b/drivers/staging/rt2860/chlist.h @@ -957,16 +957,12 @@ static inline VOID ChBandCheck( switch(PhyMode) { case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AN_MIXED: -#endif // DOT11_N_SUPPORT // *pChType = BAND_5G; break; case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11AGN_MIXED: case PHY_11ABGN_MIXED: -#endif // DOT11_N_SUPPORT // *pChType = BAND_BOTH; break; @@ -1114,8 +1110,6 @@ static inline VOID BuildBeaconChList( } } - -#ifdef DOT11_N_SUPPORT static inline BOOLEAN IsValidChannel( IN PRTMP_ADAPTER pAd, IN UCHAR channel) @@ -1273,8 +1267,6 @@ static inline VOID N_SetCenCh( pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; } } -#endif // DOT11_N_SUPPORT // - static inline UINT8 GetCuntryMaxTxPwr( IN PRTMP_ADAPTER pAd, diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c index 419327fb690f..8d40e158cfc8 100644 --- a/drivers/staging/rt2860/common/action.c +++ b/drivers/staging/rt2860/common/action.c @@ -73,13 +73,11 @@ VOID ActionStateMachineInit( StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction); -#ifdef DOT11_N_SUPPORT StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction); -#endif // DOT11_N_SUPPORT // StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction); StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction); @@ -89,7 +87,6 @@ VOID ActionStateMachineInit( StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction); } -#ifdef DOT11_N_SUPPORT VOID MlmeADDBAAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -254,7 +251,6 @@ VOID MlmeDELBAAction( DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator)); } } -#endif // DOT11_N_SUPPORT // VOID MlmeQOSAction( IN PRTMP_ADAPTER pAd, @@ -282,7 +278,6 @@ VOID PeerQOSAction( { } -#ifdef DOT11_N_SUPPORT VOID PeerBAAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -302,7 +297,6 @@ VOID PeerBAAction( break; } } -#endif // DOT11_N_SUPPORT // VOID PeerPublicAction( IN PRTMP_ADAPTER pAd, @@ -337,7 +331,6 @@ VOID PeerRMAction( return; } -#ifdef DOT11_N_SUPPORT static VOID respond_ht_information_exchange_action( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -547,7 +540,6 @@ VOID SendRefreshBAR( } } } -#endif // DOT11_N_SUPPORT // VOID ActHeaderInit( IN PRTMP_ADAPTER pAd, diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c index 41361a3dca78..8877f815e861 100644 --- a/drivers/staging/rt2860/common/ba_action.c +++ b/drivers/staging/rt2860/common/ba_action.c @@ -25,8 +25,6 @@ ************************************************************************* */ -#ifdef DOT11_N_SUPPORT - #include "../rt_config.h" @@ -1768,6 +1766,3 @@ VOID Indicate_AMPDU_Packet( #endif } } - -#endif // DOT11_N_SUPPORT // - diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index da16b8218616..92f07ff8bad9 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -534,9 +534,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( { // Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode. if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED -#ifdef DOT11_N_SUPPORT || pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED -#endif // DOT11_N_SUPPORT // ) { if (pAd->LatchRfRegs.Channel > 14) @@ -713,9 +711,7 @@ static UCHAR TxPktClassification( UCHAR TxFrameType = TX_UNKOWN_FRAME; UCHAR Wcid; MAC_TABLE_ENTRY *pMacEntry = NULL; -#ifdef DOT11_N_SUPPORT BOOLEAN bHTRate = FALSE; -#endif // DOT11_N_SUPPORT // Wcid = RTMP_GET_PACKET_WCID(pPacket); if (Wcid == MCAST_WCID) @@ -729,7 +725,6 @@ static UCHAR TxPktClassification( { // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame TxFrameType = TX_LEGACY_FRAME; } -#ifdef DOT11_N_SUPPORT else if (IS_HT_RATE(pMacEntry)) { // it's a 11n capable packet @@ -749,7 +744,6 @@ static UCHAR TxPktClassification( else TxFrameType = TX_LEGACY_FRAME; } -#endif // DOT11_N_SUPPORT // else { // it's a legacy b/g packet. if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && @@ -850,7 +844,7 @@ BOOLEAN RTMP_FillTxBlkInfo( ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate. pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode; -#ifdef DOT11_N_SUPPORT + // Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it??? if (IS_HT_STA(pTxBlk->pMacEntry) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) && @@ -859,16 +853,13 @@ BOOLEAN RTMP_FillTxBlkInfo( TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM); TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS); } -#endif // DOT11_N_SUPPORT // } -#ifdef DOT11_N_SUPPORT if ( (IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { // Currently piggy-back only support when peer is operate in b/g mode. TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack); } -#endif // DOT11_N_SUPPORT // if (RTMP_GET_PACKET_MOREDATA(pPacket)) { @@ -1261,7 +1252,6 @@ VOID RTMPWriteTxWI( pTxWI->NSEQ = NSeq; // John tune the performace with Intel Client in 20 MHz performance -#ifdef DOT11_N_SUPPORT BASize = pAd->CommonCfg.TxBASize; if( BASize >7 ) @@ -1269,7 +1259,6 @@ VOID RTMPWriteTxWI( pTxWI->BAWinSize = BASize; pTxWI->ShortGI = pTransmit->field.ShortGI; pTxWI->STBC = pTransmit->field.STBC; -#endif // DOT11_N_SUPPORT // pTxWI->WirelessCliID = WCID; pTxWI->MPDUtotalByteCount = Length; @@ -1282,7 +1271,6 @@ VOID RTMPWriteTxWI( pTxWI->PHYMODE = pTransmit->field.MODE; pTxWI->CFACK = CfAck; -#ifdef DOT11_N_SUPPORT if (pMac) { if (pAd->CommonCfg.bMIMOPSEnable) @@ -1312,7 +1300,6 @@ VOID RTMPWriteTxWI( pTxWI->MpduDensity = pMac->MpduDensity; } } -#endif // DOT11_N_SUPPORT // pTxWI->PacketId = pTxWI->MCS; NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC)); @@ -1326,10 +1313,7 @@ VOID RTMPWriteTxWI_Data( { HTTRANSMIT_SETTING *pTransmit; PMAC_TABLE_ENTRY pMacEntry; -#ifdef DOT11_N_SUPPORT UCHAR BASize; -#endif // DOT11_N_SUPPORT // - ASSERT(pTxWI); @@ -1355,7 +1339,6 @@ VOID RTMPWriteTxWI_Data( // If CCK or OFDM, BW must be 20 pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW); -#ifdef DOT11_N_SUPPORT pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE); // John tune the performace with Intel Client in 20 MHz performance @@ -1372,12 +1355,10 @@ VOID RTMPWriteTxWI_Data( pTxWI->BAWinSize = BASize; pTxWI->ShortGI = pTransmit->field.ShortGI; pTxWI->STBC = pTransmit->field.STBC; -#endif // DOT11_N_SUPPORT // pTxWI->MCS = pTransmit->field.MCS; pTxWI->PHYMODE = pTransmit->field.MODE; -#ifdef DOT11_N_SUPPORT if (pMacEntry) { if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7)) @@ -1404,7 +1385,6 @@ VOID RTMPWriteTxWI_Data( pTxWI->MpduDensity = pMacEntry->MpduDensity; } } -#endif // DOT11_N_SUPPORT // #ifdef DBG_DIAGNOSE if (pTxBlk->QueIdx== 0) @@ -1449,7 +1429,6 @@ VOID RTMPWriteTxWI_Cache( pTxWI->PacketId = pTransmit->field.MCS; } -#ifdef DOT11_N_SUPPORT pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE); pTxWI->MIMOps = 0; @@ -1471,7 +1450,6 @@ VOID RTMPWriteTxWI_Cache( } } } -#endif // DOT11_N_SUPPORT // #ifdef DBG_DIAGNOSE if (pTxBlk->QueIdx== 0) @@ -1586,12 +1564,10 @@ BOOLEAN PeerIsAggreOn( if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags)) { -#ifdef DOT11_N_SUPPORT if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX) { return TRUE; } -#endif // DOT11_N_SUPPORT // #ifdef AGGREGATION_SUPPORT if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) @@ -2431,11 +2407,8 @@ BOOLEAN MacTableDeleteEntry( // Delete this entry from ASIC on-chip WCID Table RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid); -#ifdef DOT11_N_SUPPORT // free resources of BA BASessionTearDownALL(pAd, pEntry->Aid); -#endif // DOT11_N_SUPPORT // - pPrevEntry = NULL; pProbeEntry = pAd->MacTab.Hash[HashIdx]; @@ -2489,9 +2462,7 @@ BOOLEAN MacTableDeleteEntry( //Reset operating mode when no Sta. if (pAd->MacTab.Size == 0) { -#ifdef DOT11_N_SUPPORT pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0; -#endif // DOT11_N_SUPPORT // AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/); } @@ -2519,11 +2490,8 @@ VOID MacTableReset( RT28XX_STA_ENTRY_MAC_RESET(pAd, i); if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) { - -#ifdef DOT11_N_SUPPORT // free resources of BA BASessionTearDownALL(pAd, i); -#endif // DOT11_N_SUPPORT // pAd->MacTab.Content[i].ValidAsCLI = FALSE; @@ -2859,22 +2827,18 @@ VOID CmmRxnonRalinkFrameIndicate( IN RX_BLK *pRxBlk, IN UCHAR FromWhichBSSID) { -#ifdef DOT11_N_SUPPORT if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0)) { Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else -#endif // DOT11_N_SUPPORT // { -#ifdef DOT11_N_SUPPORT if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) { // handle A-MSDU Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else -#endif // DOT11_N_SUPPORT // { Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID); } diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index ba679da55804..dc919160752a 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -63,7 +63,6 @@ INT Show_FragThreshold_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); @@ -103,7 +102,6 @@ INT Show_HtAmsdu_Proc( INT Show_HtAutoBa_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, @@ -182,7 +180,6 @@ static struct { {"BGProtection", Show_BGProtection_Proc}, {"RTSThreshold", Show_RTSThreshold_Proc}, {"FragThreshold", Show_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT {"HtBw", Show_HtBw_Proc}, {"HtMcs", Show_HtMcs_Proc}, {"HtGi", Show_HtGi_Proc}, @@ -193,7 +190,6 @@ static struct { {"HtRdg", Show_HtRdg_Proc}, {"HtAmsdu", Show_HtAmsdu_Proc}, {"HtAutoBa", Show_HtAutoBa_Proc}, -#endif // DOT11_N_SUPPORT // {"CountryRegion", Show_CountryRegion_Proc}, {"CountryRegionABand", Show_CountryRegionABand_Proc}, {"CountryCode", Show_CountryCode_Proc}, @@ -344,14 +340,12 @@ INT Set_WirelessMode_Proc( { INT MaxPhyMode = PHY_11G; -#ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // if (WirelessMode <= MaxPhyMode) { RTMPSetPhyMode(pAd, WirelessMode); -#ifdef DOT11_N_SUPPORT + if (WirelessMode >= PHY_11ABGN_MIXED) { pAd->CommonCfg.BACapability.field.AutoBA = TRUE; @@ -362,7 +356,7 @@ INT Set_WirelessMode_Proc( pAd->CommonCfg.BACapability.field.AutoBA = FALSE; pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE; } -#endif // DOT11_N_SUPPORT // + // Set AdhocMode rates if (pAd->StaCfg.BssType == BSS_ADHOC) { @@ -380,9 +374,7 @@ INT Set_WirelessMode_Proc( // it is needed to set SSID to take effect if (success == TRUE) { -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode)); } else @@ -419,7 +411,6 @@ INT Set_Channel_Proc( if (MONITOR_ON(pAd)) { -#ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) @@ -431,7 +422,6 @@ INT Set_Channel_Proc( pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); } else -#endif // DOT11_N_SUPPORT // { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); @@ -1209,12 +1199,10 @@ VOID RTMPSetPhyMode( case PHY_11G: case PHY_11BG_MIXED: case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11N_2_4G: case PHY_11ABGN_MIXED: case PHY_11BGN_MIXED: case PHY_11GN_MIXED: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate @@ -1244,11 +1232,9 @@ VOID RTMPSetPhyMode( break; case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AN_MIXED: case PHY_11AGN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate @@ -1278,8 +1264,6 @@ VOID RTMPSetPhyMode( pAd->CommonCfg.BandState = UNKNOWN_BAND; } - -#ifdef DOT11_N_SUPPORT /* ======================================================================== Routine Description: @@ -1659,7 +1643,6 @@ VOID RTMPUpdateHTIE( DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n")); } -#endif // DOT11_N_SUPPORT // /* ======================================================================== @@ -1938,9 +1921,7 @@ VOID RTMPIoctlGetMacTable( COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr); MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid; MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode; -#ifdef DOT11_N_SUPPORT MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode; -#endif // DOT11_N_SUPPORT // // Fill in RSSI per entry MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0; @@ -2001,7 +1982,6 @@ VOID RTMPIoctlGetMacTable( kfree(msg); } -#ifdef DOT11_N_SUPPORT INT Set_BASetup_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) @@ -2685,10 +2665,7 @@ INT Set_HtMimoPs_Proc( return TRUE; } -#endif // DOT11_N_SUPPORT // - -#ifdef DOT11_N_SUPPORT INT SetCommonHT( IN PRTMP_ADAPTER pAd) { @@ -2710,7 +2687,6 @@ INT SetCommonHT( return TRUE; } -#endif // DOT11_N_SUPPORT // INT Set_FixedTxMode_Proc( IN PRTMP_ADAPTER pAd, @@ -2839,7 +2815,6 @@ INT Show_WirelessMode_Proc( case PHY_11G: sprintf(pBuf, "\t11G"); break; -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: sprintf(pBuf, "\t11A/B/G/N"); break; @@ -2861,7 +2836,6 @@ INT Show_WirelessMode_Proc( case PHY_11N_5G: sprintf(pBuf, "\t11N only with 5G"); break; -#endif // DOT11_N_SUPPORT // default: sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode); break; @@ -2955,7 +2929,6 @@ INT Show_FragThreshold_Proc( return 0; } -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3077,7 +3050,6 @@ INT Show_HtAutoBa_Proc( sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE"); return 0; } -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c index fdd4b0c71b7b..e5bebd5de93b 100644 --- a/drivers/staging/rt2860/common/cmm_sanity.c +++ b/drivers/staging/rt2860/common/cmm_sanity.c @@ -557,7 +557,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( else *pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag. } -#ifdef DOT11_N_SUPPORT // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP, @@ -576,7 +575,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *AddHtInfoLen = SIZE_ADD_HT_INFO_IE; } } -#endif // DOT11_N_SUPPORT // else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)) { // Copy to pVIE which will report to microsoft bssid list. diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c index a3f9395150ac..cdbc8a34d3fc 100644 --- a/drivers/staging/rt2860/common/cmm_sync.c +++ b/drivers/staging/rt2860/common/cmm_sync.c @@ -95,9 +95,7 @@ VOID BuildChannelList( // if not 11a-only mode, channel list starts from 2.4Ghz band if ((pAd->CommonCfg.PhyMode != PHY_11A) -#ifdef DOT11_N_SUPPORT && (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G) -#endif // DOT11_N_SUPPORT // ) { switch (pAd->CommonCfg.CountryRegion & 0x7f) @@ -146,10 +144,8 @@ VOID BuildChannelList( } if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) -#ifdef DOT11_N_SUPPORT || (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G) -#endif // DOT11_N_SUPPORT // ) { switch (pAd->CommonCfg.CountryRegionForABand & 0x7f) @@ -499,9 +495,7 @@ VOID ScanNextChannel( else // must be SCAN_PASSIVE or SCAN_ACTIVE { if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) -#ifdef DOT11_N_SUPPORT || (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) -#endif // DOT11_N_SUPPORT // ) { if (pAd->MlmeAux.Channel > 14) @@ -560,7 +554,6 @@ VOID ScanNextChannel( FrameLen += Tmp; } -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { ULONG Tmp; @@ -590,8 +583,6 @@ VOID ScanNextChannel( } FrameLen += Tmp; } -#endif // DOT11_N_SUPPORT // - MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen); MlmeFreeMemory(pAd, pOutBuffer); diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index e089ea8ea3bd..81332673437e 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -50,9 +50,7 @@ UCHAR Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04}; UCHAR RALINK_OUI[] = {0x00, 0x0c, 0x43}; UCHAR BROADCOM_OUI[] = {0x00, 0x90, 0x4c}; UCHAR WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04}; -#ifdef DOT11_N_SUPPORT UCHAR PRE_N_HT_OUI[] = {0x00, 0x90, 0x4c}; -#endif // DOT11_N_SUPPORT // UCHAR RateSwitchTable[] = { // Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) @@ -128,7 +126,6 @@ UCHAR RateSwitchTable11G[] = { 0x07, 0x10, 7, 10, 13, }; -#ifdef DOT11_N_SUPPORT UCHAR RateSwitchTable11N1S[] = { // Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) 0x09, 0x00, 0, 0, 0, // Initial used item after association @@ -285,7 +282,6 @@ UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3 0x0a, 0x20, 23, 8, 25, 0x0b, 0x22, 23, 8, 25, }; -#endif // DOT11_N_SUPPORT // PUCHAR ReasonString[] = { /* 0 */ "Reserved", @@ -332,11 +328,9 @@ USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, UCHAR SsidIe = IE_SSID; UCHAR SupRateIe = IE_SUPP_RATES; UCHAR ExtRateIe = IE_EXT_SUPP_RATES; -#ifdef DOT11_N_SUPPORT UCHAR HtCapIe = IE_HT_CAP; UCHAR AddHtInfoIe = IE_ADD_HT; UCHAR NewExtChanIe = IE_SECONDARY_CH_OFFSET; -#endif // DOT11_N_SUPPORT // UCHAR ErpIe = IE_ERP; UCHAR DsIe = IE_DS_PARM; UCHAR TimIe = IE_TIM; @@ -932,12 +926,8 @@ VOID MlmePeriodicExec( // the dynamic tuning mechanism below are based on most up-to-date information NICUpdateRawCounters(pAd); - -#ifdef DOT11_N_SUPPORT // Need statistics after read counter. So put after NICUpdateRawCounters ORIBATimerTimeout(pAd); -#endif // DOT11_N_SUPPORT // - // The time period for checking antenna is according to traffic if (pAd->Mlme.bEnableAutoAntennaCheck) @@ -1162,7 +1152,6 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.AdhocBOnlyJoined = FALSE; } -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { if ((pAd->StaCfg.AdhocBGJoined) && @@ -1179,7 +1168,6 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.Adhoc20NJoined = FALSE; } } -#endif // DOT11_N_SUPPORT // //radar detect if ((pAd->CommonCfg.Channel > 14) @@ -1251,7 +1239,6 @@ VOID STAMlmePeriodicExec( SKIP_AUTO_SCAN_CONN: -#ifdef DOT11_N_SUPPORT if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE)) { pAd->MacTab.fAnyBASession = TRUE; @@ -1262,7 +1249,6 @@ SKIP_AUTO_SCAN_CONN: pAd->MacTab.fAnyBASession = FALSE; AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // return; } @@ -1372,7 +1358,6 @@ VOID MlmeSelectTxRateTable( if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd)) { -#ifdef DOT11_N_SUPPORT if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && !pAd->StaCfg.AdhocBOnlyJoined && !pAd->StaCfg.AdhocBGJoined && @@ -1406,7 +1391,6 @@ VOID MlmeSelectTxRateTable( } else -#endif // DOT11_N_SUPPORT // if (pAd->CommonCfg.PhyMode == PHY_11B) { *ppTable = RateSwitchTable11B; @@ -1439,7 +1423,6 @@ VOID MlmeSelectTxRateTable( break; } -#ifdef DOT11_N_SUPPORT if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) {// 11BGN 1S AP @@ -1496,12 +1479,10 @@ VOID MlmeSelectTxRateTable( break; } -#endif // DOT11_N_SUPPORT // + //else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen == 4) -#ifdef DOT11_N_SUPPORT && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // ) {// B only AP *ppTable = RateSwitchTable11B; @@ -1513,9 +1494,7 @@ VOID MlmeSelectTxRateTable( //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen > 8) -#ifdef DOT11_N_SUPPORT && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // ) {// B/G mixed AP *ppTable = RateSwitchTable11BG; @@ -1527,9 +1506,7 @@ VOID MlmeSelectTxRateTable( //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen == 8) -#ifdef DOT11_N_SUPPORT && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // ) {// G only AP *ppTable = RateSwitchTable11G; @@ -1538,15 +1515,11 @@ VOID MlmeSelectTxRateTable( break; } -#ifdef DOT11_N_SUPPORT -#endif // DOT11_N_SUPPORT // IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef DOT11_N_SUPPORT //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) -#endif // DOT11_N_SUPPORT // { // Legacy mode if (pAd->CommonCfg.MaxTxRate <= RATE_11) { @@ -1569,7 +1542,7 @@ VOID MlmeSelectTxRateTable( } break; } -#ifdef DOT11_N_SUPPORT + if (pAd->LatchRfRegs.Channel <= 14) { if (pAd->CommonCfg.TxStream == 1) @@ -1604,7 +1577,7 @@ VOID MlmeSelectTxRateTable( DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n")); } } -#endif // DOT11_N_SUPPORT // + DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n", pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1])); } @@ -1828,13 +1801,11 @@ VOID MlmeSetTxRate( { UCHAR MaxMode = MODE_OFDM; -#ifdef DOT11_N_SUPPORT MaxMode = MODE_HTGREENFIELD; if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2)) pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE; else -#endif // DOT11_N_SUPPORT // pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE; if (pTxRate->CurrMCS < MCS_AUTO) @@ -1864,14 +1835,11 @@ VOID MlmeSetTxRate( if (pTxRate->Mode <= MaxMode) pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode; -#ifdef DOT11_N_SUPPORT if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI)) pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400; else -#endif // DOT11_N_SUPPORT // pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; -#ifdef DOT11_N_SUPPORT // Reexam each bandwidth's SGI support. if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400) { @@ -1915,17 +1883,15 @@ VOID MlmeSetTxRate( { AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); } -#endif // DOT11_N_SUPPORT // pEntry->HTPhyMode.field.STBC = pAd->StaCfg.HTPhyMode.field.STBC; pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI; pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE; -#ifdef DOT11_N_SUPPORT + if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) && pAd->WIFItestbed.bGreenField) pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD; -#endif // DOT11_N_SUPPORT // } pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word); @@ -2070,14 +2036,12 @@ VOID MlmeDynamicTxRateSwitching( pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; -#ifdef DOT11_N_SUPPORT if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) { TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); } else -#endif // DOT11_N_SUPPORT // { TrainUp = pCurrTxRate->TrainUp; TrainDown = pCurrTxRate->TrainDown; @@ -2201,7 +2165,7 @@ VOID MlmeDynamicTxRateSwitching( RssiOffset = 8; } } -#ifdef DOT11_N_SUPPORT + /*if (MCS15)*/ if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || @@ -2267,7 +2231,6 @@ VOID MlmeDynamicTxRateSwitching( TxRateIdx = MCS0; } else -#endif // DOT11_N_SUPPORT // {// Legacy mode if (MCS7 && (Rssi > -70)) TxRateIdx = MCS7; @@ -2495,14 +2458,12 @@ VOID StaQuickResponeForRateUpExec( pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; -#ifdef DOT11_N_SUPPORT if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) { TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); } else -#endif // DOT11_N_SUPPORT // { TrainUp = pCurrTxRate->TrainUp; TrainDown = pCurrTxRate->TrainDown; @@ -3033,9 +2994,7 @@ VOID MlmeUpdateTxRates( { case PHY_11BG_MIXED: case PHY_11B: -#ifdef DOT11_N_SUPPORT case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.MlmeRate = RATE_1; pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1; @@ -3043,22 +3002,18 @@ VOID MlmeUpdateTxRates( break; case PHY_11G: case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AGN_MIXED: case PHY_11GN_MIXED: case PHY_11N_2_4G: case PHY_11AN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.MlmeRate = RATE_6; pAd->CommonCfg.RtsRate = RATE_6; pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; break; case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: -#endif // DOT11_N_SUPPORT // if (pAd->CommonCfg.Channel <= 14) { pAd->CommonCfg.MlmeRate = RATE_1; @@ -3101,7 +3056,6 @@ VOID MlmeUpdateTxRates( pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word )); } -#ifdef DOT11_N_SUPPORT /* ========================================================================== Description: @@ -3252,7 +3206,6 @@ VOID MlmeUpdateHtTxRates( pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE)); DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n")); } -#endif // DOT11_N_SUPPORT // // IRQL = DISPATCH_LEVEL VOID MlmeRadioOff( @@ -3297,7 +3250,6 @@ VOID BssTableInit( } } -#ifdef DOT11_N_SUPPORT VOID BATableInit( IN PRTMP_ADAPTER pAd, IN BA_TABLE *Tab) @@ -3317,7 +3269,6 @@ VOID BATableInit( Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE; } } -#endif // DOT11_N_SUPPORT // /*! \brief search the BSS table by SSID * \param p_tab pointer to the bss table @@ -3427,7 +3378,6 @@ VOID BssTableDeleteEntry( } } -#ifdef DOT11_N_SUPPORT /* ======================================================================== Routine Description: @@ -3459,7 +3409,6 @@ VOID BATableDeleteORIEntry( NdisReleaseSpinLock(&pAd->BATabLock); } } -#endif // DOT11_N_SUPPORT // /*! \brief * \param @@ -3576,7 +3525,7 @@ VOID BssEntrySet( pBss->AddHtInfoLen = 0; pBss->HtCapabilityLen = 0; -#ifdef DOT11_N_SUPPORT + if (HtCapabilityLen> 0) { pBss->HtCapabilityLen = HtCapabilityLen; @@ -3596,7 +3545,6 @@ VOID BssEntrySet( } } } -#endif // DOT11_N_SUPPORT // BssCipherParse(pBss); @@ -3787,7 +3735,7 @@ VOID BssTableSsidSort( (SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded)) { BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; -#ifdef DOT11_N_SUPPORT + // 2.4G/5G N only mode if ((pInBss->HtCapabilityLen == 0) && ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) @@ -3795,7 +3743,6 @@ VOID BssTableSsidSort( DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); continue; } -#endif // DOT11_N_SUPPORT // // New for WPA2 // Check the Authmode first @@ -3868,7 +3815,6 @@ VOID BssTableSsidSort( if (SsidLen == 0) continue; -#ifdef DOT11_N_SUPPORT // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, if ((pInBss->CentralChannel != pInBss->Channel) && @@ -3888,7 +3834,6 @@ VOID BssTableSsidSort( } } } -#endif // DOT11_N_SUPPORT // // copy matching BSS from InTab to OutTab NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); @@ -3899,8 +3844,6 @@ VOID BssTableSsidSort( { BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; - -#ifdef DOT11_N_SUPPORT // 2.4G/5G N only mode if ((pInBss->HtCapabilityLen == 0) && ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) @@ -3908,7 +3851,6 @@ VOID BssTableSsidSort( DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); continue; } -#endif // DOT11_N_SUPPORT // // New for WPA2 // Check the Authmode first @@ -3964,7 +3906,6 @@ VOID BssTableSsidSort( else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) continue; -#ifdef DOT11_N_SUPPORT // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, if ((pInBss->CentralChannel != pInBss->Channel) && @@ -3977,7 +3918,6 @@ VOID BssTableSsidSort( pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; } } -#endif // DOT11_N_SUPPORT // // copy matching BSS from InTab to OutTab NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); @@ -5175,7 +5115,6 @@ VOID AsicUpdateAutoFallBackTable( } } break; -#ifdef DOT11_N_SUPPORT case 2: //HT-MIX case 3: //HT-GF { @@ -5237,7 +5176,6 @@ VOID AsicUpdateAutoFallBackTable( } } break; -#endif // DOT11_N_SUPPORT // } pNextTxRate = pCurrTxRate; @@ -5279,7 +5217,6 @@ VOID AsicUpdateProtect( UCHAR i; UINT32 MacReg = 0; -#ifdef DOT11_N_SUPPORT if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8)) { return; @@ -5293,7 +5230,6 @@ VOID AsicUpdateProtect( SetMask = ALLN_SETPROTECT; OperationMode = 8; } -#endif // DOT11_N_SUPPORT // // Config ASIC RTS threshold register RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg); @@ -5303,9 +5239,7 @@ VOID AsicUpdateProtect( #else // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096 if (( -#ifdef DOT11_N_SUPPORT (pAd->CommonCfg.BACapability.field.AmsduEnable) || -#endif // DOT11_N_SUPPORT // (pAd->CommonCfg.bAggregationCapable == TRUE)) && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD) { @@ -5354,7 +5288,6 @@ VOID AsicUpdateProtect( Protect[1] = ProtCfg.word; } -#ifdef DOT11_N_SUPPORT // Decide HT frame protection. if ((SetMask & ALLN_SETPROTECT) != 0) { @@ -5485,7 +5418,6 @@ VOID AsicUpdateProtect( break; } } -#endif // DOT11_N_SUPPORT // offset = CCK_PROT_CFG; for (i = 0;i < 6;i++) @@ -6235,9 +6167,7 @@ VOID AsicDisableRDG( Data &= 0xFFFFFF00; if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE) -#ifdef DOT11_N_SUPPORT && (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE) -#endif // DOT11_N_SUPPORT // ) { // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode @@ -6656,9 +6586,7 @@ VOID AsicSetSlotTime( { // force using short SLOT time for FAE to demo performance when TxBurst is ON if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) -#ifdef DOT11_N_SUPPORT || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)) -#endif // DOT11_N_SUPPORT // ) { // In this case, we will think it is doing Wi-Fi test @@ -7299,7 +7227,6 @@ VOID RTMPCheckRates( NdisMoveMemory(SupRate, NewRate, NewRateLen); } -#ifdef DOT11_N_SUPPORT BOOLEAN RTMPCheckChannel( IN PRTMP_ADAPTER pAd, IN UCHAR CentralChannel, @@ -7445,7 +7372,6 @@ BOOLEAN RTMPCheckHt( COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability); return TRUE; } -#endif // DOT11_N_SUPPORT // /* ======================================================================== @@ -7478,10 +7404,8 @@ VOID RTMPUpdateMlmeRate( MinimumRate = RATE_1; break; case PHY_11BG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // if ((pAd->MlmeAux.SupRateLen == 4) && (pAd->MlmeAux.ExtRateLen == 0)) // B only AP @@ -7495,13 +7419,11 @@ VOID RTMPUpdateMlmeRate( MinimumRate = RATE_6; break; case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n case PHY_11GN_MIXED: case PHY_11AGN_MIXED: case PHY_11AN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // ProperMlmeRate = RATE_24; MinimumRate = RATE_6; break; @@ -8164,13 +8086,11 @@ VOID RTMPSetAGCInitValue( R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); } -#ifdef DOT11_N_SUPPORT else { R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); } -#endif // DOT11_N_SUPPORT // } } diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index e150c546a57d..4d2b9db2bcfe 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -1305,13 +1305,11 @@ VOID NICReadEEPROMParameters( if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11A)) pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; -#ifdef DOT11_N_SUPPORT else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)) pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED; -#endif // DOT11_N_SUPPORT // } // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly @@ -1402,9 +1400,7 @@ VOID NICReadEEPROMParameters( TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } // @@ -2212,10 +2208,8 @@ VOID NICUpdateFifoStaCounters( pEntry->DebugFIFOCount++; -#ifdef DOT11_N_SUPPORT if (StaFifo.field.TxBF) // 3*3 pEntry->TxBFCount++; -#endif // DOT11_N_SUPPORT // #ifdef UAPSD_AP_SUPPORT UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess); @@ -2233,19 +2227,15 @@ VOID NICUpdateFifoStaCounters( SendRefreshBAR(pAd, pEntry); pEntry->NoBADataCountDown = 64; #else -#ifdef DOT11_N_SUPPORT pEntry->NoBADataCountDown = 64; -#endif // DOT11_N_SUPPORT // if(pEntry->PsMode == PWR_ACTIVE) { -#ifdef DOT11_N_SUPPORT int tid; for (tid=0; tidAid, tid, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // // Update the continuous transmission counter except PS mode pEntry->ContinueTxFailCnt++; @@ -2264,7 +2254,6 @@ VOID NICUpdateFifoStaCounters( } else { -#ifdef DOT11_N_SUPPORT if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0)) { pEntry->NoBADataCountDown--; @@ -2273,7 +2262,7 @@ VOID NICUpdateFifoStaCounters( DBGPRINT(RT_DEBUG_TRACE, ("@\n")); } } -#endif // DOT11_N_SUPPORT // + pEntry->FIFOCount = 0; pEntry->OneSecTxNoRetryOkCount++; // update NoDataIdleCount when sucessful send packet to STA. @@ -2942,7 +2931,6 @@ VOID UserCfgInit( NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI)); -#ifdef DOT11_N_SUPPORT NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); pAd->HTCEnable = FALSE; pAd->bBroadComHT = FALSE; @@ -2968,7 +2956,6 @@ VOID UserCfgInit( pAd->CommonCfg.TxBASize = 7; pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word; -#endif // DOT11_N_SUPPORT // //pAd->CommonCfg.HTPhyMode.field.BW = BW_20; //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c index 598259e13845..c658bf3082c3 100644 --- a/drivers/staging/rt2860/common/spectrum.c +++ b/drivers/staging/rt2860/common/spectrum.c @@ -1069,9 +1069,9 @@ static VOID StartDFSProcedure( { // start DFS procedure pAd->CommonCfg.Channel = Channel; -#ifdef DOT11_N_SUPPORT + N_ChannelCheck(pAd); -#endif // DOT11_N_SUPPORT // + pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE; pAd->CommonCfg.RadarDetect.CSCount = 0; } diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h index ad4cc74e582b..b4d32a7e4317 100644 --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -698,7 +698,6 @@ typedef enum _RT_802_11_PHY_MODE { PHY_11A, PHY_11ABG_MIXED, PHY_11G, -#ifdef DOT11_N_SUPPORT PHY_11ABGN_MIXED, // both band 5 PHY_11N_2_4G, // 11n-only with 2.4G band 6 PHY_11GN_MIXED, // 2.4G band 7 @@ -706,7 +705,6 @@ typedef enum _RT_802_11_PHY_MODE { PHY_11BGN_MIXED, // if check 802.11b. 9 PHY_11AGN_MIXED, // if check 802.11b. 10 PHY_11N_5G, // 11n-only with 5G band 11 -#endif // DOT11_N_SUPPORT // } RT_802_11_PHY_MODE; // put all proprietery for-query objects here to reduce # of Query_OID diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c index 046d68b57928..a8c637a60785 100644 --- a/drivers/staging/rt2860/rt_linux.c +++ b/drivers/staging/rt2860/rt_linux.c @@ -942,13 +942,11 @@ void send_monitor_packets( ph->noise.len = 4; ph->noise.data = 0; -#ifdef DOT11_N_SUPPORT if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX) { rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS); } else -#endif // DOT11_N_SUPPORT // if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM) rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4; else diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 677c28507c21..7a09b7573b52 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -54,10 +54,8 @@ MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr"); /*---------------------------------------------------------------------*/ /* Prototypes of Functions Used */ /*---------------------------------------------------------------------*/ -#ifdef DOT11_N_SUPPORT extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num); extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd); -#endif // DOT11_N_SUPPORT // extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd); extern void init_thread_task(PRTMP_ADAPTER pAd); @@ -294,11 +292,8 @@ int rt28xx_close(IN PNET_DEV dev) RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); -#ifdef DOT11_N_SUPPORT // Free BA reorder resource ba_reordering_resource_release(pAd); -#endif // DOT11_N_SUPPORT // - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP); @@ -313,11 +308,8 @@ static int rt28xx_init(IN struct net_device *net_dev) NDIS_STATUS Status; UINT32 MacCsr0 = 0; - -#ifdef DOT11_N_SUPPORT // Allocate BA Reordering memory ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM); -#endif // DOT11_N_SUPPORT // // Make sure MAC gets ready. index = 0; @@ -415,7 +407,6 @@ static int rt28xx_init(IN struct net_device *net_dev) //Init Ba Capability parameters. -#ifdef DOT11_N_SUPPORT pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; @@ -424,7 +415,6 @@ static int rt28xx_init(IN struct net_device *net_dev) pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; -#endif // DOT11_N_SUPPORT // printk("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode); @@ -439,9 +429,7 @@ static int rt28xx_init(IN struct net_device *net_dev) TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // // No valid channels. if (pAd->ChannelListNum == 0) @@ -450,11 +438,9 @@ static int rt28xx_init(IN struct net_device *net_dev) goto err4; } -#ifdef DOT11_N_SUPPORT printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0], pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2], pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]); -#endif // DOT11_N_SUPPORT // #ifdef IKANOS_VX_1X0 VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress); @@ -501,10 +487,7 @@ err3: err2: RTMPFreeTxRxRingMemory(pAd); err1: - -#ifdef DOT11_N_SUPPORT os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool -#endif // DOT11_N_SUPPORT // RT28XX_IRQ_RELEASE(net_dev); // shall not set ml_priv to NULL here because the ml_priv didn't been free yet. diff --git a/drivers/staging/rt2860/rt_profile.c b/drivers/staging/rt2860/rt_profile.c index 47180557eff6..d89a1c716245 100644 --- a/drivers/staging/rt2860/rt_profile.c +++ b/drivers/staging/rt2860/rt_profile.c @@ -27,12 +27,10 @@ #include "rt_config.h" -#ifdef DOT11_N_SUPPORT static void HTParametersHook( IN PRTMP_ADAPTER pAd, IN CHAR *pValueStr, IN CHAR *pInput); -#endif // DOT11_N_SUPPORT // #define ETH_MAC_ADDR_STR_LEN 17 // in format of xx:xx:xx:xx:xx:xx @@ -1009,9 +1007,7 @@ NDIS_STATUS RTMPReadParametersHook( { int value = 0, maxPhyMode = PHY_11G; -#ifdef DOT11_N_SUPPORT maxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // value = simple_strtol(tmpbuf, 0, 10); @@ -1362,9 +1358,7 @@ NDIS_STATUS RTMPReadParametersHook( //DefaultKeyID, KeyType, KeyStr rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer); -#ifdef DOT11_N_SUPPORT HTParametersHook(pAd, tmpbuf, buffer); -#endif // DOT11_N_SUPPORT // IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { @@ -1481,7 +1475,6 @@ NDIS_STATUS RTMPReadParametersHook( return (NDIS_STATUS_SUCCESS); } -#ifdef DOT11_N_SUPPORT static void HTParametersHook( IN PRTMP_ADAPTER pAd, IN CHAR *pValueStr, @@ -1888,5 +1881,3 @@ static void HTParametersHook( } } -#endif // DOT11_N_SUPPORT // - diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index ae8f13d36ada..51e58db50f59 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -133,11 +133,9 @@ extern UCHAR SsidIe; extern UCHAR SupRateIe; extern UCHAR ExtRateIe; -#ifdef DOT11_N_SUPPORT extern UCHAR HtCapIe; extern UCHAR AddHtInfoIe; extern UCHAR NewExtChanIe; -#endif // DOT11_N_SUPPORT // extern UCHAR ErpIe; extern UCHAR DsIe; @@ -162,7 +160,6 @@ extern UCHAR RateSwitchTable11B[]; extern UCHAR RateSwitchTable11G[]; extern UCHAR RateSwitchTable11BG[]; -#ifdef DOT11_N_SUPPORT extern UCHAR RateSwitchTable11BGN1S[]; extern UCHAR RateSwitchTable11BGN2S[]; extern UCHAR RateSwitchTable11BGN2SForABand[]; @@ -171,11 +168,9 @@ extern UCHAR RateSwitchTable11N2S[]; extern UCHAR RateSwitchTable11N2SForABand[]; extern UCHAR PRE_N_HT_OUI[]; -#endif // DOT11_N_SUPPORT // #define MAXSEQ (0xFFF) -#ifdef DOT11_N_SUPPORT struct reordering_mpdu { struct reordering_mpdu *next; @@ -196,7 +191,6 @@ struct reordering_mpdu_pool NDIS_SPIN_LOCK lock; struct reordering_list freelist; }; -#endif // DOT11_N_SUPPORT // typedef struct _RSSI_SAMPLE { CHAR LastRssi0; // last received RSSI @@ -344,7 +338,6 @@ typedef struct _QUEUE_HEADER { } \ } -#ifdef DOT11_N_SUPPORT // StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. #define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \ { \ @@ -368,7 +361,6 @@ typedef struct _QUEUE_HEADER { _pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs); \ _pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \ } -#endif // DOT11_N_SUPPORT // // // MACRO for 32-bit PCI register read / write @@ -1358,7 +1350,6 @@ typedef enum _ORI_BLOCKACK_STATUS Originator_Done } ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS; -#ifdef DOT11_N_SUPPORT typedef struct _BA_ORI_ENTRY{ UCHAR Wcid; UCHAR TID; @@ -1437,7 +1428,6 @@ typedef union _BACAP_STRUC { } field; UINT32 word; } BACAP_STRUC, *PBACAP_STRUC; -#endif // DOT11_N_SUPPORT // //This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) typedef struct _IOT_STRUC { @@ -1688,10 +1678,9 @@ typedef struct _COMMON_CONFIG { ULONG TxPowerPercentage; // 0~100 % ULONG TxPowerDefault; // keep for TxPowerPercentage -#ifdef DOT11_N_SUPPORT BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 -#endif // DOT11_N_SUPPORT // + IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter; ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable @@ -1703,9 +1692,8 @@ typedef struct _COMMON_CONFIG { BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec. ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect -#ifdef DOT11_N_SUPPORT BOOLEAN bRdg; -#endif // DOT11_N_SUPPORT // + BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP @@ -1724,7 +1712,6 @@ typedef struct _COMMON_CONFIG { // IEEE802.11H--DFS. RADAR_DETECT_STRUCT RadarDetect; -#ifdef DOT11_N_SUPPORT // HT UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability //RT_HT_CAPABILITY SupportedHtPhy; @@ -1745,7 +1732,6 @@ typedef struct _COMMON_CONFIG { ULONG LastRcvBSSWidthTriggerEventsTime; UCHAR TxBASize; -#endif // DOT11_N_SUPPORT // // Enable wireless event BOOLEAN bWirelessEvent; @@ -2073,14 +2059,11 @@ typedef struct _MAC_TABLE_ENTRY { UINT32 StaConnectTime; // the live time of this station since associated with AP - -#ifdef DOT11_N_SUPPORT BOOLEAN bSendBAR; USHORT NoBADataCountDown; UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment UINT TxBFCount; // 3*3 -#endif // DOT11_N_SUPPORT // UINT FIFOCount; UINT DebugFIFOCount; UINT DebugTxCount; @@ -2117,10 +2100,8 @@ typedef struct _MAC_TABLE_ENTRY { // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED ULONG ClientStatusFlags; - // TODO: Shall we move that to DOT11_N_SUPPORT??? HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. -#ifdef DOT11_N_SUPPORT // HT EWC MIMO-N used parameters USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI @@ -2137,7 +2118,6 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR MmpsMode; // MIMO power save more. HT_CAPABILITY_IE HTCapability; -#endif // DOT11_N_SUPPORT // BOOLEAN bAutoTxRateSwitch; @@ -2163,16 +2143,13 @@ typedef struct _MAC_TABLE { BOOLEAN fAnyStationInPsm; BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP -#ifdef DOT11_N_SUPPORT BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/ BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF. BOOLEAN fAnyStation20Only; // Check if any Station can't support GF. BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS -#endif // DOT11_N_SUPPORT // } MAC_TABLE, *PMAC_TABLE; -#ifdef DOT11_N_SUPPORT #define IS_HT_STA(_pMacEntry) \ (_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX) @@ -2181,7 +2158,6 @@ typedef struct _MAC_TABLE { #define PEER_IS_HT_RATE(_pMacEntry) \ (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX) -#endif // DOT11_N_SUPPORT // typedef struct _WDS_ENTRY { BOOLEAN Valid; @@ -2569,9 +2545,8 @@ typedef struct _RTMP_ADAPTER MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. NDIS_SPIN_LOCK MacTabLock; -#ifdef DOT11_N_SUPPORT BA_TABLE BATable; -#endif // DOT11_N_SUPPORT // + NDIS_SPIN_LOCK BATabLock; RALINK_TIMER_STRUCT RECBATimer; @@ -2662,9 +2637,7 @@ typedef struct _RTMP_ADAPTER struct wificonf WIFItestbed; -#ifdef DOT11_N_SUPPORT struct reordering_mpdu_pool mpdu_blk_pool; -#endif // DOT11_N_SUPPORT // ULONG OneSecondnonBEpackets; // record non BE packets per second @@ -3129,7 +3102,6 @@ VOID MlmeQOSAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); -#ifdef DOT11_N_SUPPORT VOID PeerAddBAReqAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); @@ -3145,7 +3117,6 @@ VOID PeerDelBAAction( VOID PeerBAAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); -#endif // DOT11_N_SUPPORT // VOID SendPSMPAction( IN PRTMP_ADAPTER pAd, @@ -3168,17 +3139,14 @@ VOID PeerBSSTranAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); -#ifdef DOT11_N_SUPPORT VOID PeerHTAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); -#endif // DOT11_N_SUPPORT // VOID PeerQOSAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem); -#ifdef DOT11_N_SUPPORT VOID RECBATimerTimeout( IN PVOID SystemSpecific1, IN PVOID FunctionContext, @@ -3191,7 +3159,6 @@ VOID ORIBATimerTimeout( VOID SendRefreshBAR( IN PRTMP_ADAPTER pAd, IN MAC_TABLE_ENTRY *pEntry); -#endif // DOT11_N_SUPPORT // VOID ActHeaderInit( IN PRTMP_ADAPTER pAd, @@ -3224,7 +3191,6 @@ BOOLEAN QosBADataParse( IN USHORT Datasize, IN UINT CurRxIndex); -#ifdef DOT11_N_SUPPORT BOOLEAN CntlEnqueueForRecv( IN PRTMP_ADAPTER pAd, IN ULONG Wcid, @@ -3233,7 +3199,6 @@ BOOLEAN CntlEnqueueForRecv( VOID BaAutoManSwitch( IN PRTMP_ADAPTER pAd); -#endif // DOT11_N_SUPPORT // VOID HTIOTCheck( IN PRTMP_ADAPTER pAd, @@ -3700,11 +3665,9 @@ VOID MlmeRadioOn( VOID BssTableInit( IN BSS_TABLE *Tab); -#ifdef DOT11_N_SUPPORT VOID BATableInit( IN PRTMP_ADAPTER pAd, IN BA_TABLE *Tab); -#endif // DOT11_N_SUPPORT // ULONG BssTableSearch( IN BSS_TABLE *Tab, @@ -3730,7 +3693,6 @@ VOID BssTableDeleteEntry( IN PUCHAR pBssid, IN UCHAR Channel); -#ifdef DOT11_N_SUPPORT VOID BATableDeleteORIEntry( IN OUT PRTMP_ADAPTER pAd, IN BA_ORI_ENTRY *pBAORIEntry); @@ -3751,7 +3713,6 @@ VOID BATableTearRECEntry( IN UCHAR TID, IN UCHAR WCID, IN BOOLEAN ALL); -#endif // DOT11_N_SUPPORT // VOID BssEntrySet( IN PRTMP_ADAPTER pAd, @@ -3813,7 +3774,6 @@ ULONG BssTableSetEntry( IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE); -#ifdef DOT11_N_SUPPORT VOID BATableInsertEntry( IN PRTMP_ADAPTER pAd, IN USHORT Aid, @@ -3823,7 +3783,6 @@ VOID BATableInsertEntry( IN UCHAR BAWinSize, IN UCHAR OriginatorStatus, IN BOOLEAN IsRecipient); -#endif // DOT11_N_SUPPORT // VOID BssTableSsidSort( IN PRTMP_ADAPTER pAd, @@ -4550,11 +4509,9 @@ VOID MlmeUpdateTxRates( IN BOOLEAN bLinkUp, IN UCHAR apidx); -#ifdef DOT11_N_SUPPORT VOID MlmeUpdateHtTxRates( IN PRTMP_ADAPTER pAd, IN UCHAR apidx); -#endif // DOT11_N_SUPPORT // VOID RTMPCheckRates( IN PRTMP_ADAPTER pAd, @@ -4811,7 +4768,6 @@ VOID RTMPAddBSSIDCipher( IN PNDIS_802_11_KEY pKey, IN UCHAR CipherAlg); -#ifdef DOT11_N_SUPPORT VOID RTMPSetHT( IN PRTMP_ADAPTER pAd, IN OID_SET_HT_PHYMODE *pHTPhyMode); @@ -4819,7 +4775,6 @@ VOID RTMPSetHT( VOID RTMPSetIndividualHT( IN PRTMP_ADAPTER pAd, IN UCHAR apidx); -#endif // DOT11_N_SUPPORT // VOID RTMPSendWirelessEvent( IN PRTMP_ADAPTER pAd, @@ -5459,7 +5414,6 @@ UCHAR VLAN_8023_Header_Copy( OUT PUCHAR pData, IN UCHAR FromWhichBSSID); -#ifdef DOT11_N_SUPPORT void ba_flush_reordering_timeout_mpdus( IN PRTMP_ADAPTER pAd, IN PBA_REC_ENTRY pBAEntry, @@ -5477,7 +5431,6 @@ VOID BAOriSessionSetUp( VOID BASessionTearDownALL( IN OUT PRTMP_ADAPTER pAd, IN UCHAR Wcid); -#endif // DOT11_N_SUPPORT // BOOLEAN OS_Need_Clone_Packet(void); @@ -5625,7 +5578,6 @@ INT Set_ResetStatCounter_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#ifdef DOT11_N_SUPPORT INT Set_BASetup_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); @@ -5726,19 +5678,16 @@ INT Set_HtMIMOPSmode_Proc( INT Set_HtTxBASize_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#endif // DOT11_N_SUPPORT // //Dls , kathy VOID RTMPSendDLSTearDownFrame( IN PRTMP_ADAPTER pAd, IN PUCHAR pDA); -#ifdef DOT11_N_SUPPORT //Block ACK VOID QueryBATABLE( IN PRTMP_ADAPTER pAd, OUT PQUERYBA_TABLE pBAT); -#endif // DOT11_N_SUPPORT // INT WpaCheckEapCode( IN PRTMP_ADAPTER pAd, @@ -5756,15 +5705,12 @@ VOID SendAssocIEsToWpaSupplicant( int wext_notify_event_assoc( IN RTMP_ADAPTER *pAd); -#ifdef DOT11_N_SUPPORT VOID Handle_BSS_Width_Trigger_Events( IN PRTMP_ADAPTER pAd); void build_ext_channel_switch_ie( IN PRTMP_ADAPTER pAd, IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE); -#endif // DOT11_N_SUPPORT // - BOOLEAN APRxDoneInterruptHandle( IN PRTMP_ADAPTER pAd); @@ -5773,7 +5719,6 @@ BOOLEAN STARxDoneInterruptHandle( IN PRTMP_ADAPTER pAd, IN BOOLEAN argc); -#ifdef DOT11_N_SUPPORT // AMPDU packet indication VOID Indicate_AMPDU_Packet( IN PRTMP_ADAPTER pAd, @@ -5785,7 +5730,6 @@ VOID Indicate_AMSDU_Packet( IN PRTMP_ADAPTER pAd, IN RX_BLK *pRxBlk, IN UCHAR FromWhichBSSID); -#endif // DOT11_N_SUPPORT // // Normal legacy Rx packet indication VOID Indicate_Legacy_Packet( @@ -6033,13 +5977,11 @@ static inline char* GetPhyMode( case MODE_OFDM: return "OFDM"; -#ifdef DOT11_N_SUPPORT case MODE_HTMIX: return "HTMIX"; case MODE_HTGREENFIELD: return "GREEN"; -#endif // DOT11_N_SUPPORT // default: return "N/A"; } @@ -6056,10 +5998,8 @@ static inline char* GetBW( case BW_20: return "20M"; -#ifdef DOT11_N_SUPPORT case BW_40: return "40M"; -#endif // DOT11_N_SUPPORT // default: return "N/A"; } diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index 2a709166f74d..5abe8d746e27 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -1003,10 +1003,9 @@ // Preamble MODE in TxD #define MODE_CCK 0 #define MODE_OFDM 1 -#ifdef DOT11_N_SUPPORT #define MODE_HTMIX 2 #define MODE_HTGREENFIELD 3 -#endif // DOT11_N_SUPPORT // + // MCS for CCK. BW.SGI.STBC are reserved #define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps #define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps @@ -1053,12 +1052,10 @@ #define MCS_32 32 #define MCS_AUTO 33 -#ifdef DOT11_N_SUPPORT // OID_HTPHYMODE // MODE #define HTMODE_MM 0 #define HTMODE_GF 1 -#endif // DOT11_N_SUPPORT // // Fixed Tx MODE - HT, CCK or OFDM #define FIXED_TXMODE_HT 0 @@ -1070,15 +1067,12 @@ #define BW_BOTH BAND_WIDTH_BOTH #define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. -#ifdef DOT11_N_SUPPORT // SHORTGI #define GI_400 GAP_INTERVAL_400 // only support in HT mode #define GI_BOTH GAP_INTERVAL_BOTH -#endif // DOT11_N_SUPPORT // #define GI_800 GAP_INTERVAL_800 // STBC #define STBC_NONE 0 -#ifdef DOT11_N_SUPPORT #define STBC_USE 1 // limited use in rt2860b phy #define RXSTBC_ONE 1 // rx support of one spatial stream #define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream @@ -1100,8 +1094,6 @@ #define AMSDU_0 0 #define AMSDU_1 1 -#endif // DOT11_N_SUPPORT // - // MCS use 7 bits #define TXRATEMIMO 0x80 #define TXRATEMCS 0x7F diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c index b6092d16d966..e5bfb0fb8d51 100644 --- a/drivers/staging/rt2860/sta/assoc.c +++ b/drivers/staging/rt2860/sta/assoc.c @@ -341,7 +341,6 @@ VOID MlmeAssocReqAction( FrameLen += tmp; } -#ifdef DOT11_N_SUPPORT // HT if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) { @@ -368,7 +367,6 @@ VOID MlmeAssocReqAction( } FrameLen += TmpLen; } -#endif // DOT11_N_SUPPORT // // add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION // Case I: (Aggregation + Piggy-Back) @@ -676,7 +674,6 @@ VOID MlmeReassocReqAction( FrameLen += tmp; } -#ifdef DOT11_N_SUPPORT // HT if ((pAd->MlmeAux.HtCapabilityLen > 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) { @@ -703,7 +700,6 @@ VOID MlmeReassocReqAction( } FrameLen += TmpLen; } -#endif // DOT11_N_SUPPORT // // add Ralink proprietary IE to inform AP this STA is going to use AGGREGATION or PIGGY-BACK+AGGREGATION // Case I: (Aggregation + Piggy-Back) @@ -882,9 +878,7 @@ VOID PeerAssocRspAction( if(MAC_ADDR_EQUAL(Addr2, pAd->MlmeAux.Bssid)) { DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=%d)\n", Status)); -#ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_TRACE, ("PeerAssocRspAction():MacTable [%d].AMsduSize = %d. ClientStatusFlags = 0x%lx \n",Elem->Wcid, pAd->MacTab.Content[BSSID_WCID].AMsduSize, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags)); -#endif // DOT11_N_SUPPORT // RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled); if(Status == MLME_SUCCESS) { @@ -1028,7 +1022,7 @@ VOID AssocPostProc( COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2); pAd->MlmeAux.Aid = Aid; pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; -#ifdef DOT11_N_SUPPORT + // Some HT AP might lost WMM IE. We add WMM ourselves. beacuase HT requires QoS on. if ((HtCapabilityLen > 0) && (pEdcaParm->bValid == FALSE)) { @@ -1054,7 +1048,6 @@ VOID AssocPostProc( pEdcaParm->Txop[3] = 48; } -#endif // DOT11_N_SUPPORT // NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM)); @@ -1068,7 +1061,6 @@ VOID AssocPostProc( NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen); RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen); -#ifdef DOT11_N_SUPPORT if (HtCapabilityLen > 0) { RTMPCheckHt(pAd, BSSID_WCID, pHtCapability, pAddHtInfo); @@ -1077,7 +1069,6 @@ VOID AssocPostProc( DBGPRINT(RT_DEBUG_TRACE, ("AssocPostProc===> (Mmps=%d, AmsduSize=%d, )\n", pAd->MacTab.Content[BSSID_WCID].MmpsMode, pAd->MacTab.Content[BSSID_WCID].AMsduSize)); -#endif // DOT11_N_SUPPORT // // Set New WPA information Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel); diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index 7cede82cc5b7..01521032635d 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -783,7 +783,7 @@ VOID CntlWaitStartProc( DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel)); return; } -#ifdef DOT11_N_SUPPORT + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { N_ChannelCheck(pAd); @@ -807,7 +807,6 @@ VOID CntlWaitStartProc( } } else -#endif // DOT11_N_SUPPORT // { pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE; } @@ -1065,9 +1064,8 @@ VOID LinkUp( COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd); -#ifdef DOT11_N_SUPPORT COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd); -#endif // DOT11_N_SUPPORT // + // It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS // is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place // to examine if cipher algorithm switching is required. @@ -1114,7 +1112,6 @@ VOID LinkUp( Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF; RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); -#ifdef DOT11_N_SUPPORT // Change to AP channel if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) { @@ -1180,7 +1177,6 @@ VOID LinkUp( DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel )); } else -#endif // DOT11_N_SUPPORT // { pAd->CommonCfg.BBPCurrentBW = BW_20; pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; @@ -1220,9 +1216,7 @@ VOID LinkUp( DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n", BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); -#ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity)); -#endif // DOT11_N_SUPPORT // AsicSetBssid(pAd, pAd->CommonCfg.Bssid); @@ -1232,7 +1226,6 @@ VOID LinkUp( // Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE); -#ifdef DOT11_N_SUPPORT if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) { // Update HT protectionfor based on AP's operating mode. @@ -1243,7 +1236,6 @@ VOID LinkUp( else AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS)); @@ -1493,10 +1485,8 @@ VOID LinkUp( pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags)); MlmeUpdateTxRates(pAd, TRUE, BSS0); -#ifdef DOT11_N_SUPPORT MlmeUpdateHtTxRates(pAd, BSS0); DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable)); -#endif // DOT11_N_SUPPORT // if (pAd->CommonCfg.bAggregationCapable) { @@ -1516,12 +1506,11 @@ VOID LinkUp( if (pAd->MlmeAux.APRalinkIe != 0x0) { -#ifdef DOT11_N_SUPPORT if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE)) { AsicEnableRDG(pAd); } -#endif // DOT11_N_SUPPORT // + OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET); CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET); } @@ -1532,9 +1521,7 @@ VOID LinkUp( } } -#ifdef DOT11_N_SUPPORT DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags)); -#endif // DOT11_N_SUPPORT // // Set LED RTMPSetLED(pAd, LED_LINK_UP); @@ -1559,13 +1546,13 @@ VOID LinkUp( if (pAd->StaCfg.bAutoTxRateSwitch == FALSE) { pEntry->bAutoTxRateSwitch = FALSE; -#ifdef DOT11_N_SUPPORT + if (pEntry->HTPhyMode.field.MCS == 32) pEntry->HTPhyMode.field.ShortGI = GI_800; if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32)) pEntry->HTPhyMode.field.STBC = STBC_NONE; -#endif // DOT11_N_SUPPORT // + // If the legacy mode is set, overwrite the transmit setting of this entry. if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM) RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry); @@ -1594,7 +1581,6 @@ VOID LinkUp( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value); } -#ifdef DOT11_N_SUPPORT if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) { } @@ -1604,7 +1590,6 @@ VOID LinkUp( // Because our Init value is 1 at MACRegTable. RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff); } -#endif // DOT11_N_SUPPORT // // Patch for Marvel AP to gain high throughput // Need to set as following, @@ -1616,7 +1601,6 @@ VOID LinkUp( // Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable // // if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is. -#ifdef DOT11_N_SUPPORT if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))) { @@ -1628,7 +1612,6 @@ VOID LinkUp( DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n")); } else -#endif // DOT11_N_SUPPORT // if (pAd->CommonCfg.bEnableTxBurst) { RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); @@ -1650,7 +1633,6 @@ VOID LinkUp( DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n")); } -#ifdef DOT11_N_SUPPORT // Re-check to turn on TX burst or not. if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd)))) { @@ -1670,7 +1652,6 @@ VOID LinkUp( { pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE; } -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE; COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid); @@ -1862,12 +1843,11 @@ VOID LinkDown( NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID); pAd->CommonCfg.SsidLen = 0; } -#ifdef DOT11_N_SUPPORT + NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE)); NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE)); pAd->MlmeAux.HtCapabilityLen = 0; pAd->MlmeAux.NewExtChannelOffset = 0xff; -#endif // DOT11_N_SUPPORT // // Reset WPA-PSK state. Only reset when supplicant enabled if (pAd->StaCfg.WpaState != SS_NOTUSE) @@ -1946,7 +1926,6 @@ VOID LinkDown( pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate; pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate; -#ifdef DOT11_N_SUPPORT // // After Link down, reset piggy-back setting in ASIC. Disable RDG. // @@ -1957,7 +1936,7 @@ VOID LinkDown( ByteValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue); } -#endif // DOT11_N_SUPPORT // + // Reset DAC RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue); ByteValue &= (~0x18); @@ -1970,9 +1949,7 @@ VOID LinkDown( RTMPSetPiggyBack(pAd,FALSE); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED); -#ifdef DOT11_N_SUPPORT pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word; -#endif // DOT11_N_SUPPORT // // Restore all settings in the following. AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE); @@ -2361,7 +2338,6 @@ ULONG MakeIbssBeacon( FrameLen += tmp; } -#ifdef DOT11_N_SUPPORT if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) { ULONG TmpLen; @@ -2382,7 +2358,6 @@ ULONG MakeIbssBeacon( FrameLen += TmpLen; } -#endif // DOT11_N_SUPPORT // //beacon use reserved WCID 0xff if (pAd->CommonCfg.Channel > 14) diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index fc5b75a5c966..b5cceaa3ae7b 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -170,13 +170,12 @@ VOID STARxDataFrameAnnounce( else { RX_BLK_SET_FLAG(pRxBlk, fRX_EAP); -#ifdef DOT11_N_SUPPORT + if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0)) { Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else -#endif // DOT11_N_SUPPORT // { // Determin the destination of the EAP frame // to WPA state machine or upper layer @@ -427,12 +426,10 @@ VOID STAHandleRxDataFrame( else #endif { -#ifdef DOT11_N_SUPPORT RX_BLK_SET_FLAG(pRxBlk, fRX_HTC); // skip HTC contorl field pRxBlk->pData += 4; pRxBlk->DataSize -= 4; -#endif // DOT11_N_SUPPORT // } } @@ -445,13 +442,10 @@ VOID STAHandleRxDataFrame( pRxBlk->pData += 2; } -#ifdef DOT11_N_SUPPORT if (pRxD->BA) { RX_BLK_SET_FLAG(pRxBlk, fRX_AMPDU); } -#endif // DOT11_N_SUPPORT // - // // Case I Process Broadcast & Multicast data frame @@ -580,21 +574,17 @@ VOID STAHandleRxControlFrame( IN PRTMP_ADAPTER pAd, IN RX_BLK *pRxBlk) { -#ifdef DOT11_N_SUPPORT PRXWI_STRUC pRxWI = pRxBlk->pRxWI; -#endif // DOT11_N_SUPPORT // PHEADER_802_11 pHeader = pRxBlk->pHeader; PNDIS_PACKET pRxPacket = pRxBlk->pRxPacket; switch (pHeader->FC.SubType) { case SUBTYPE_BLOCK_ACK_REQ: -#ifdef DOT11_N_SUPPORT { CntlEnqueueForRecv(pAd, pRxWI->WirelessCliID, (pRxWI->MPDUtotalByteCount), (PFRAME_BA_REQ)pHeader); } break; -#endif // DOT11_N_SUPPORT // case SUBTYPE_BLOCK_ACK: case SUBTYPE_ACK: default: @@ -983,10 +973,8 @@ NDIS_STATUS STASendPacket( NumberOfFrag = 1; // Aggregation overwhelms fragmentation else if (CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED)) NumberOfFrag = 1; // Aggregation overwhelms fragmentation -#ifdef DOT11_N_SUPPORT else if ((pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTMIX) || (pAd->StaCfg.HTPhyMode.field.MODE == MODE_HTGREENFIELD)) NumberOfFrag = 1; // MIMO RATE overwhelms fragmentation -#endif // DOT11_N_SUPPORT // else { // The calculated "NumberOfFrag" is a rough estimation because of various @@ -1086,7 +1074,6 @@ NDIS_STATUS STASendPacket( } RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); -#ifdef DOT11_N_SUPPORT if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&& (pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) { @@ -1104,7 +1091,6 @@ NDIS_STATUS STASendPacket( BAOriSessionSetUp(pAd, pEntry, 0, 0, 10, FALSE); } } -#endif // DOT11_N_SUPPORT // pAd->RalinkCounters.OneSecOsTxCount[QueIdx]++; // TODO: for debug only. to be removed return NDIS_STATUS_SUCCESS; @@ -1414,7 +1400,6 @@ VOID STABuildCommon802_11Header( pHeader_802_11->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE); } -#ifdef DOT11_N_SUPPORT VOID STABuildCache802_11Header( IN RTMP_ADAPTER *pAd, IN TX_BLK *pTxBlk, @@ -1456,7 +1441,6 @@ VOID STABuildCache802_11Header( else pHeader80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE); } -#endif // DOT11_N_SUPPORT // static inline PUCHAR STA_Build_ARalink_Frame_Header( IN RTMP_ADAPTER *pAd, @@ -1516,7 +1500,6 @@ static inline PUCHAR STA_Build_ARalink_Frame_Header( } -#ifdef DOT11_N_SUPPORT static inline PUCHAR STA_Build_AMSDU_Frame_Header( IN RTMP_ADAPTER *pAd, IN TX_BLK *pTxBlk) @@ -1840,7 +1823,6 @@ VOID STA_AMSDU_Frame_Tx( if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } -#endif // DOT11_N_SUPPORT // VOID STA_Legacy_Frame_Tx( IN PRTMP_ADAPTER pAd, @@ -2353,14 +2335,12 @@ NDIS_STATUS STAHardTransmit( switch (pTxBlk->TxFrameType) { -#ifdef DOT11_N_SUPPORT case TX_AMPDU_FRAME: STA_AMPDU_Frame_Tx(pAd, pTxBlk); break; case TX_AMSDU_FRAME: STA_AMSDU_Frame_Tx(pAd, pTxBlk); break; -#endif // DOT11_N_SUPPORT // case TX_LEGACY_FRAME: STA_Legacy_Frame_Tx(pAd, pTxBlk); break; diff --git a/drivers/staging/rt2860/sta/sanity.c b/drivers/staging/rt2860/sta/sanity.c index 239872464bed..7d530f601602 100644 --- a/drivers/staging/rt2860/sta/sanity.c +++ b/drivers/staging/rt2860/sta/sanity.c @@ -184,7 +184,6 @@ BOOLEAN PeerAssocRspSanity( } break; -#ifdef DOT11_N_SUPPORT case IE_ADD_HT: case IE_ADD_HT2: if (pEid->Len >= sizeof(ADD_HT_INFO_IE)) @@ -213,7 +212,6 @@ BOOLEAN PeerAssocRspSanity( { DBGPRINT(RT_DEBUG_WARN, ("PeerAssocRspSanity - wrong IE_SECONDARY_CH_OFFSET. \n")); } -#endif // DOT11_N_SUPPORT // break; case IE_AIRONET_CKIP: // 0. Check Aironet IE length, it must be larger or equal to 28 diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c index fe80bb1a94f7..f80c21dfd120 100644 --- a/drivers/staging/rt2860/sta/sync.c +++ b/drivers/staging/rt2860/sta/sync.c @@ -141,7 +141,6 @@ VOID BeaconTimeout( if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) return; -#ifdef DOT11_N_SUPPORT if ((pAd->CommonCfg.BBPCurrentBW == BW_40) ) { @@ -154,7 +153,6 @@ VOID BeaconTimeout( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr)); } -#endif // DOT11_N_SUPPORT // MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_BEACON_TIMEOUT, 0, NULL); RT28XX_MLME_HANDLER(pAd); @@ -522,7 +520,7 @@ VOID MlmeStartReqAction( pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen; NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES); RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen); -#ifdef DOT11_N_SUPPORT + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo); @@ -531,7 +529,6 @@ VOID MlmeStartReqAction( DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n")); } else -#endif // DOT11_N_SUPPORT // { pAd->MlmeAux.HtCapabilityLen = 0; pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE; @@ -599,10 +596,9 @@ VOID PeerBeaconAtScanAction( // Init Variable IE structure pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE; pVIE->Length = 0; -#ifdef DOT11_N_SUPPORT + RTMPZeroMemory(&HtCapability, sizeof(HtCapability)); RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE)); -#endif // DOT11_N_SUPPORT // if (PeerBeaconAndProbeRspSanity(pAd, Elem->Msg, @@ -653,11 +649,9 @@ VOID PeerBeaconAtScanAction( Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2)); - -#ifdef DOT11_N_SUPPORT if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0)) HtCapabilityLen = SIZE_HT_CAP_IE; -#endif // DOT11_N_SUPPORT // + if ((pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) && (Channel == pAd->StaCfg.CCXScanChannel)) { Idx = BssTableSetEntry(pAd, &pAd->StaCfg.CCXBssTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod, @@ -727,9 +721,7 @@ VOID PeerBeaconAtJoinAction( UCHAR HtCapabilityLen = 0, PreNHtCapabilityLen = 0; UCHAR AddHtInfoLen; UCHAR NewExtChannelOffset = 0xff; -#ifdef DOT11_N_SUPPORT UCHAR CentralChannel; -#endif // DOT11_N_SUPPORT // // Init Variable IE structure pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE; @@ -845,7 +837,7 @@ VOID PeerBeaconAtJoinAction( RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen); NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16); -#ifdef DOT11_N_SUPPORT + pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset; pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen; @@ -890,7 +882,6 @@ VOID PeerBeaconAtJoinAction( } else -#endif // DOT11_N_SUPPORT // { // To prevent error, let legacy AP must have same CentralChannel and Channel. if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0)) @@ -905,9 +896,7 @@ VOID PeerBeaconAtJoinAction( // copy QOS related information if ((pAd->CommonCfg.bWmmCapable) -#ifdef DOT11_N_SUPPORT || (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) -#endif // DOT11_N_SUPPORT // ) { NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM)); @@ -1048,14 +1037,12 @@ VOID PeerBeacon( if (pAd->Mlme.CntlMachine.CurrState == CNTL_WAIT_DISASSOC) return; -#ifdef DOT11_N_SUPPORT // Copy Control channel for this BSSID. if (AddHtInfoLen != 0) Channel = AddHtInfo.ControlChan; if ((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0)) HtCapabilityLen = SIZE_HT_CAP_IE; -#endif // DOT11_N_SUPPORT // // // Housekeeping "SsidBssTab" table for later-on ROAMing usage. @@ -1215,7 +1202,7 @@ VOID PeerBeacon( pAd->StaCfg.Last11bBeaconRxTime = Now; break; } -#ifdef DOT11_N_SUPPORT + // Update Ht Phy. if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) { @@ -1271,7 +1258,6 @@ VOID PeerBeacon( } else -#endif // DOT11_N_SUPPORT // { RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE); RTMPZeroMemory(&pAd->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE); @@ -1285,7 +1271,6 @@ VOID PeerBeacon( MakeIbssBeacon(pAd); // re-build BEACON frame AsicEnableIbssSync(pAd); // copy to on-chip memory } -#ifdef DOT11_N_SUPPORT else if ((bRestart == TRUE) && (bnRestart == TRUE)) { MlmeUpdateTxRates(pAd, FALSE, BSS0); @@ -1293,7 +1278,6 @@ VOID PeerBeacon( MakeIbssBeacon(pAd); // re-build BEACON frame AsicEnableIbssSync(pAd); // copy to on-chip memory } -#endif // DOT11_N_SUPPORT // // At least another peer in this IBSS, declare MediaState as CONNECTED if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) @@ -1357,13 +1341,11 @@ VOID PeerBeacon( } MlmeUpdateTxRates(pAd, FALSE, 0); } -#ifdef DOT11_N_SUPPORT else { MlmeUpdateTxRates(pAd, FALSE, 0); MlmeUpdateHtTxRates(pAd, BSS0); } -#endif // DOT11_N_SUPPORT // { union iwreq_data wrqu; @@ -1415,7 +1397,6 @@ VOID PeerBeacon( DBGPRINT(RT_DEBUG_WARN, ("SYNC - AP changed B/G protection to %d\n", bUseBGProtection)); } -#ifdef DOT11_N_SUPPORT // check Ht protection mode. and adhere to the Non-GF device indication by AP. if ((AddHtInfoLen != 0) && ((AddHtInfo.AddHtInfo2.OperaionMode != pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode) || @@ -1432,7 +1413,6 @@ VOID PeerBeacon( DBGPRINT(RT_DEBUG_TRACE, ("SYNC - AP changed N OperaionMode to %d\n", pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode)); } -#endif // DOT11_N_SUPPORT // if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED) && ERP_IS_USE_BARKER_PREAMBLE(Erp)) @@ -1542,9 +1522,7 @@ VOID PeerProbeReqAction( UCHAR Addr2[MAC_ADDR_LEN]; CHAR Ssid[MAX_LEN_OF_SSID]; UCHAR SsidLen; -#ifdef DOT11_N_SUPPORT UCHAR HtLen, AddHtLen, NewExtLen; -#endif // DOT11_N_SUPPORT // HEADER_802_11 ProbeRspHdr; NDIS_STATUS NStatus; PUCHAR pOutBuffer = NULL; @@ -1617,7 +1595,7 @@ VOID PeerProbeReqAction( END_OF_ARGS); FrameLen += tmp; } -#ifdef DOT11_N_SUPPORT + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { ULONG TmpLen; @@ -1650,7 +1628,7 @@ VOID PeerProbeReqAction( } FrameLen += TmpLen; } -#endif // DOT11_N_SUPPORT // + MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen); MlmeFreeMemory(pAd, pOutBuffer); } diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index 217f01f8b251..a2644a92f6f9 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -187,11 +187,9 @@ INT Set_FragTest_Proc( IN PRTMP_ADAPTER pAdapter, IN PUCHAR arg); -#ifdef DOT11_N_SUPPORT INT Set_TGnWifiTest_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#endif // DOT11_N_SUPPORT // INT Set_LongRetryLimit_Proc( IN PRTMP_ADAPTER pAdapter, @@ -217,7 +215,6 @@ static struct { {"BGProtection", Set_BGProtection_Proc}, {"RTSThreshold", Set_RTSThreshold_Proc}, {"FragThreshold", Set_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT {"HtBw", Set_HtBw_Proc}, {"HtMcs", Set_HtMcs_Proc}, {"HtGi", Set_HtGi_Proc}, @@ -231,8 +228,6 @@ static struct { {"HtBaDecline", Set_BADecline_Proc}, {"HtProtect", Set_HtProtect_Proc}, {"HtMimoPs", Set_HtMimoPs_Proc}, -#endif // DOT11_N_SUPPORT // - #ifdef AGGREGATION_SUPPORT {"PktAggregate", Set_PktAggregate_Proc}, #endif @@ -257,10 +252,8 @@ static struct { #endif {"WpaSupport", Set_Wpa_Support}, {"FixedTxMode", Set_FixedTxMode_Proc}, -#ifdef DOT11_N_SUPPORT {"TGnWifiTest", Set_TGnWifiTest_Proc}, {"ForceGF", Set_ForceGF_Proc}, -#endif // DOT11_N_SUPPORT // {"LongRetry", Set_LongRetryLimit_Proc}, {"ShortRetry", Set_ShortRetryLimit_Proc}, {NULL,} @@ -1893,7 +1886,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, return Status; } -#ifdef DOT11_N_SUPPORT void getBaInfo( IN PRTMP_ADAPTER pAd, IN PUCHAR pOutBuf) @@ -1940,7 +1932,6 @@ void getBaInfo( return; } -#endif // DOT11_N_SUPPORT // static int rt_private_show(struct net_device *dev, struct iw_request_info *info, @@ -1986,12 +1977,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, case SHOW_CONN_STATUS: if (MONITOR_ON(pAd)) { -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAd->CommonCfg.RegTransmitSetting.field.BW) sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel); else -#endif // DOT11_N_SUPPORT // sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel); } else @@ -2025,12 +2014,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ ); wrq->length = strlen(extra) + 1; // 1: size of '\0' break; -#ifdef DOT11_N_SUPPORT case SHOW_BA_INFO: getBaInfo(pAd, extra); wrq->length = strlen(extra) + 1; // 1: size of '\0' break; -#endif // DOT11_N_SUPPORT // case SHOW_DESC_INFO: { Show_DescInfo_Proc(pAd, NULL); @@ -2864,9 +2851,7 @@ int rt_ioctl_siwrate(struct net_device *dev, (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)) RTMPSetDesiredRates(pAd, -1); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } else { @@ -2879,9 +2864,7 @@ int rt_ioctl_siwrate(struct net_device *dev, else { pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS)); } @@ -2929,13 +2912,11 @@ int rt_ioctl_giwrate(struct net_device *dev, else ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word; -#ifdef DOT11_N_SUPPORT if (ht_setting.field.MODE >= MODE_HTMIX) { rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS); } else -#endif // DOT11_N_SUPPORT // if (ht_setting.field.MODE == MODE_OFDM) rate_index = (UCHAR)(ht_setting.field.MCS) + 4; else if (ht_setting.field.MODE == MODE_CCK) @@ -3100,18 +3081,13 @@ INT RTMPSetInformation( ULONG PowerTemp; BOOLEAN RadioState; BOOLEAN StateMachineTouched = FALSE; -#ifdef DOT11_N_SUPPORT OID_SET_HT_PHYMODE HT_PhyMode; //11n ,kathy -#endif // DOT11_N_SUPPORT // PNDIS_802_11_PMKID pPmkId = NULL; BOOLEAN IEEE8021xState = FALSE; BOOLEAN IEEE8021x_required_keys = FALSE; UCHAR wpa_supplicant_enable = 0; -#ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // - DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(), 0x%08x\n", cmd&0x7FFF)); switch(cmd & 0x7FFF) { @@ -3131,9 +3107,7 @@ INT RTMPSetInformation( pAdapter->CommonCfg.PhyMode = 0xff; // Build all corresponding channel information RTMPSetPhyMode(pAdapter, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand, pAdapter->CommonCfg.CountryRegion)); } @@ -3311,9 +3285,7 @@ INT RTMPSetInformation( if (PhyMode <= MaxPhyMode) { RTMPSetPhyMode(pAdapter, PhyMode); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // } DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode)); } @@ -3582,10 +3554,10 @@ INT RTMPSetInformation( RTMPSetPhyMode(pAdapter, PHY_11A); else Status = -EINVAL; -#ifdef DOT11_N_SUPPORT + if (Status == NDIS_STATUS_SUCCESS) SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType)); } break; @@ -3729,7 +3701,6 @@ INT RTMPSetInformation( pAdapter->bConfigChanged = TRUE; } break; -#ifdef DOT11_N_SUPPORT case RT_OID_802_11_SET_HT_PHYMODE: if (wrq->u.data.length != sizeof(OID_SET_HT_PHYMODE)) Status = -EINVAL; @@ -3748,7 +3719,6 @@ INT RTMPSetInformation( pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI, pAdapter->StaCfg.HTPhyMode.field.STBC)); break; -#endif // DOT11_N_SUPPORT // case RT_OID_802_11_SET_APSD_SETTING: if (wrq->u.data.length != sizeof(ULONG)) Status = -EINVAL; @@ -3831,8 +3801,6 @@ INT RTMPSetInformation( StateMachineTouched = TRUE; } break; - -#ifdef DOT11_N_SUPPORT case RT_OID_802_11_SET_IMME_BA_CAP: if (wrq->u.data.length != sizeof(OID_BACAP_STRUC)) Status = -EINVAL; @@ -3987,8 +3955,6 @@ INT RTMPSetInformation( } } break; -#endif // DOT11_N_SUPPORT // - // For WPA_SUPPLICANT to set static wep key case OID_802_11_ADD_WEP: pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG); @@ -5325,19 +5291,14 @@ INT Set_NetworkType_Proc( DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n")); if (pAdapter->CommonCfg.CentralChannel == 0) { -#ifdef DOT11_N_SUPPORT if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED) pAdapter->CommonCfg.CentralChannel = 36; else -#endif // DOT11_N_SUPPORT // pAdapter->CommonCfg.CentralChannel = 6; } -#ifdef DOT11_N_SUPPORT else N_ChannelCheck(pAdapter); -#endif // DOT11_N_SUPPORT // -#ifdef DOT11_N_SUPPORT if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 && pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE) @@ -5388,7 +5349,6 @@ INT Set_NetworkType_Proc( pAdapter->CommonCfg.CentralChannel)); } else -#endif // DOT11_N_SUPPORT // { // 20MHz RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue); -- 2.39.5