From 18f63bf60d507b4588f33ecfd8657f5d5e2a7b45 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Fri, 23 Mar 2012 10:02:17 +0100 Subject: [PATCH] hwmon: (fam15h_power) Increase output resolution commit 941a956b0e387b21f385f486c34ef67576775cfc upstream. On high CPU load the accumulating values in the running_avg_cap register are very low (below 10), so averaging them too early leads to unnecessary poor output resolution. Since we pretend to output micro-Watt we better keep all the bits we have as long as possible. Signed-off-by: Andre Przywara Signed-off-by: Andreas Herrmann Acked-by: Guenter Roeck Signed-off-by: Jean Delvare Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/fam15h_power.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 9a4c3abc9d92..e8e18cab1fb8 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -61,14 +61,14 @@ static ssize_t show_power(struct device *dev, REG_TDP_RUNNING_AVERAGE, &val); running_avg_capture = (val >> 4) & 0x3fffff; running_avg_capture = sign_extend32(running_avg_capture, 21); - running_avg_range = val & 0xf; + running_avg_range = (val & 0xf) + 1; pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), REG_TDP_LIMIT3, &val); tdp_limit = val >> 16; - curr_pwr_watts = tdp_limit + data->base_tdp - - (s32)(running_avg_capture >> (running_avg_range + 1)); + curr_pwr_watts = (tdp_limit + data->base_tdp) << running_avg_range; + curr_pwr_watts -= running_avg_capture; curr_pwr_watts *= data->tdp_to_watts; /* @@ -78,7 +78,7 @@ static ssize_t show_power(struct device *dev, * scaling factor 1/(2^16). For conversion we use * (10^6)/(2^16) = 15625/(2^10) */ - curr_pwr_watts = (curr_pwr_watts * 15625) >> 10; + curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range); return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts); } static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL); -- 2.39.5