From 1a7e99c1fe080cc75ab34e1cbf788ed09b2f58b5 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 31 Mar 2014 14:19:21 +0200 Subject: [PATCH] mmc: mmci: Add DT bindings for feedback clock pin The ST Micro variant supports the option of using a feedback clock signal in favor of the clockout pin when latching incoming signals on the data bus. Since this is matter of how pins are being routed we need to provide a new DT binding to be able to configure this through DT. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij --- Documentation/devicetree/bindings/mmc/mmci.txt | 2 ++ drivers/mmc/host/mmci.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 9bd2ffa704a7..2c8756fb7755 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -24,6 +24,7 @@ Optional properties: - st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1]. - st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7]. - st,sig-dir-cmd : cmd signal direction pin used for CMD. +- st,sig-pin-fbclk : feedback clock signal pin used. Example: @@ -47,6 +48,7 @@ sdi0_per1@80126000 { st,sig-dir-dat0; st,sig-dir-dat2; st,sig-dir-cmd; + st,sig-pin-fbclk; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index aa26e810b7ad..2ce9111c4627 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1402,6 +1402,8 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, pdata->sigdir |= MCI_ST_DATA74DIREN; if (of_get_property(np, "st,sig-dir-cmd", NULL)) pdata->sigdir |= MCI_ST_CMDDIREN; + if (of_get_property(np, "st,sig-pin-fbclk", NULL)) + pdata->sigdir |= MCI_ST_FBCLKEN; pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); -- 2.39.2