From 1aa1d858f582c7b1c245e8990ab21e1d9d8d00b1 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 21 May 2017 18:44:36 +0200 Subject: [PATCH] ARM: dts: bcm283x: Add dtsi for OTG mode The Raspberry Pi Zero also supports OTG mode. So provide a dtsi file to configure the USB interface accordingly. The fifo sizes are optimized for device endpoint 6 and 7 with the maximum of 768. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi new file mode 100644 index 000000000000..e7d217c967a1 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -0,0 +1,10 @@ +&usb { + dr_mode = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + /* + * According to dwc2 the sum of all device EP + * fifo sizes shouldn't exceed 3776 bytes. + */ + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; -- 2.39.5