From 1db5aa05629820445deab2c65c872dd7b7284104 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Sun, 23 Jun 2013 06:15:15 +0300 Subject: [PATCH] staging: rtl8192u: limit line size in r819xU_phy.c This patch limits the line size below 80 characters, when possible without producing new checkpatch errors. This is done by adjusting identation, replacing hardcoded function names in messages with __func__, merging some trailing comments with the header comments when they both refer to the same line and removing some unnecessary parenthesis. Also, changes slightly some RT_TRACE messages to make them shorter without altering their content. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r819xU_phy.c | 877 +++++++++++++++----------- 1 file changed, 505 insertions(+), 372 deletions(-) diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index 627165a33620..9931b171f2d3 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -154,25 +154,31 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, if (offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; /* Switch to Reg_Mode2 for Reg 31-45 */ - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); /* Modify offset */ new_offset = offset - 30; } else if (offset >= 16) { priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); /* Switch to Reg_Mode1 for Reg16-30 */ - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); new_offset = offset - 15; } else { new_offset = offset; } } else { - RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); + RT_TRACE((COMP_PHY|COMP_ERR), + "check RF type here, need to be 8256\n"); new_offset = offset; } /* Put desired read addr to LSSI control Register */ - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, new_offset); + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, + new_offset); /* Issue a posedge trigger */ rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); @@ -181,18 +187,16 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, /* TODO: we should not delay such a long time. Ask for help from SD3 */ msleep(1); - ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, + bLSSIReadBackData); /* Switch back to Reg_Mode0 */ if (priv->rf_chip == RF_8256) { priv->RfReg0Value[eRFPath] &= 0xebf; - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); } return ret; @@ -231,18 +235,23 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, if (offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); new_offset = offset - 30; } else if (offset >= 16) { priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); new_offset = offset - 15; } else { new_offset = offset; } } else { - RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); + RT_TRACE((COMP_PHY|COMP_ERR), + "check RF type here, need to be 8256\n"); new_offset = offset; } @@ -260,11 +269,9 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, if (priv->rf_chip == RF_8256) { if (offset != 0) { priv->RfReg0Value[eRFPath] &= 0xebf; - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16)); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); } } return; @@ -495,9 +502,11 @@ void rtl8192_phy_configmac(struct net_device *dev) pdwArray[i+2] = 0x00000800; } - RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n", - pdwArray[i], pdwArray[i+1], pdwArray[i+2]); - rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + RT_TRACE(COMP_DBG, + "Rtl8190MACPHY_Array[0]=%x Rtl8190MACPHY_Array[1]=%x Rtl8190MACPHY_Array[2]=%x\n", + pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], + pdwArray[i+2]); } return; @@ -528,13 +537,22 @@ void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType) #endif if (ConfigType == BaseBand_Config_PHY_REG) { for (i = 0; i < PHY_REG_1T2RArrayLength; i += 2) { - rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], bMaskDWord, rtl819XPHY_REG_1T2RArray[i+1]); - RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n", i, rtl819XPHY_REG_1T2RArray[i], rtl819XPHY_REG_1T2RArray[i+1]); + rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], + bMaskDWord, + rtl819XPHY_REG_1T2RArray[i+1]); + RT_TRACE(COMP_DBG, + "i: %x, Rtl819xUsbPHY_REGArray[0]=%x Rtl819xUsbPHY_REGArray[1]=%x\n", + i, rtl819XPHY_REG_1T2RArray[i], + rtl819XPHY_REG_1T2RArray[i+1]); } } else if (ConfigType == BaseBand_Config_AGC_TAB) { for (i = 0; i < AGCTAB_ArrayLength; i += 2) { - rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], bMaskDWord, rtl819XAGCTAB_Array[i+1]); - RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n", i, rtl819XAGCTAB_Array[i], rtl819XAGCTAB_Array[i+1]); + rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], + bMaskDWord, rtl819XAGCTAB_Array[i+1]); + RT_TRACE(COMP_DBG, + "i: %x, rtl819XAGCTAB_Array[0]=%x rtl819XAGCTAB_Array[1]=%x\n", + i, rtl819XAGCTAB_Array[i], + rtl819XAGCTAB_Array[i+1]); } } return; @@ -699,28 +717,34 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, WriteAddr[HW90_BLOCK_PHY0] = 0x900; WriteAddr[HW90_BLOCK_PHY1] = 0x800; WriteAddr[HW90_BLOCK_RF] = 0x3; - RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock); + RT_TRACE(COMP_PHY, "%s(), CheckBlock: %d\n", __FUNCTION__, CheckBlock); for (i = 0; i < CheckTimes; i++) { /* Write data to register and readback */ switch (CheckBlock) { case HW90_BLOCK_MAC: - RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!"); + RT_TRACE(COMP_ERR, + "PHY_CheckBBRFOK(): Never Write 0x100 here!"); break; case HW90_BLOCK_PHY0: case HW90_BLOCK_PHY1: - write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]); + write_nic_dword(dev, WriteAddr[CheckBlock], + WriteData[i]); read_nic_dword(dev, WriteAddr[CheckBlock], &dwRegRead); break; case HW90_BLOCK_RF: WriteData[i] &= 0xfff; - rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]); + rtl8192_phy_SetRFReg(dev, eRFPath, + WriteAddr[HW90_BLOCK_RF], + bMask12Bits, WriteData[i]); /* TODO: we should not delay for such a long time. Ask SD3 */ msleep(1); - dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits); + dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, + WriteAddr[HW90_BLOCK_RF], + bMask12Bits); msleep(1); break; @@ -732,7 +756,9 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, /* Check whether readback data is correct */ if (dwRegRead != WriteData[i]) { - RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]); + RT_TRACE((COMP_PHY|COMP_ERR), + "error dwRegRead: %x, WriteData: %x\n", + dwRegRead, WriteData[i]); ret = 1; break; } @@ -769,10 +795,15 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) /* ----Ckeck FPGAPHY0 and PHY1 board is OK---- */ /* TODO: this function should be removed on ASIC */ - for (eCheckItem = (HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) { - rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); /* don't care RF path */ + for (eCheckItem = (HW90_BLOCK_E)HW90_BLOCK_PHY0; + eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) { + /* don't care RF path */ + rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, + (RF90_RADIO_PATH_E)0); if (rtStatus != 0) { - RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1); + RT_TRACE((COMP_ERR | COMP_PHY), + "PHY_RF8256_Config(): Check PHY%d Fail!!\n", + eCheckItem-1); return; } } @@ -794,17 +825,22 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) write_nic_byte_E(dev, 0x5e, 0x00); if (priv->card_8192_version == (u8)VERSION_819xU_A) { /* Antenna gain offset from B/C/D to A */ - reg_u32 = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]); - rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), reg_u32); + reg_u32 = (priv->AntennaTxPwDiff[1]<<4 | + priv->AntennaTxPwDiff[0]); + rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), + reg_u32); /* XSTALLCap */ reg_u32 = priv->CrystalCap & 0xf; - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, reg_u32); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, + reg_u32); } /* Check if the CCK HighPower is turned ON. This is used to calculate PWDB. */ - priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200)); + priv->bCckHighPower = (u8)rtl8192_QueryBBReg(dev, + rFPGA0_XA_HSSIParameter2, + 0x200); return; } /****************************************************************************** @@ -836,21 +872,28 @@ void rtl8192_phy_getTxPower(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); u8 tmp; - read_nic_dword(dev, rTxAGC_Rate18_06, &priv->MCSTxPowerLevelOriginalOffset[0]); - read_nic_dword(dev, rTxAGC_Rate54_24, &priv->MCSTxPowerLevelOriginalOffset[1]); - read_nic_dword(dev, rTxAGC_Mcs03_Mcs00, &priv->MCSTxPowerLevelOriginalOffset[2]); - read_nic_dword(dev, rTxAGC_Mcs07_Mcs04, &priv->MCSTxPowerLevelOriginalOffset[3]); - read_nic_dword(dev, rTxAGC_Mcs11_Mcs08, &priv->MCSTxPowerLevelOriginalOffset[4]); - read_nic_dword(dev, rTxAGC_Mcs15_Mcs12, &priv->MCSTxPowerLevelOriginalOffset[5]); + read_nic_dword(dev, rTxAGC_Rate18_06, + &priv->MCSTxPowerLevelOriginalOffset[0]); + read_nic_dword(dev, rTxAGC_Rate54_24, + &priv->MCSTxPowerLevelOriginalOffset[1]); + read_nic_dword(dev, rTxAGC_Mcs03_Mcs00, + &priv->MCSTxPowerLevelOriginalOffset[2]); + read_nic_dword(dev, rTxAGC_Mcs07_Mcs04, + &priv->MCSTxPowerLevelOriginalOffset[3]); + read_nic_dword(dev, rTxAGC_Mcs11_Mcs08, + &priv->MCSTxPowerLevelOriginalOffset[4]); + read_nic_dword(dev, rTxAGC_Mcs15_Mcs12, + &priv->MCSTxPowerLevelOriginalOffset[5]); /* Read rx initial gain */ read_nic_byte(dev, rOFDM0_XAAGCCore1, &priv->DefaultInitialGain[0]); read_nic_byte(dev, rOFDM0_XBAGCCore1, &priv->DefaultInitialGain[1]); read_nic_byte(dev, rOFDM0_XCAGCCore1, &priv->DefaultInitialGain[2]); read_nic_byte(dev, rOFDM0_XDAGCCore1, &priv->DefaultInitialGain[3]); - RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", - priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], - priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); + RT_TRACE(COMP_INIT, + "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n", + priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], + priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); /* Read framesync */ read_nic_byte(dev, rOFDM0_RxDetector3, &priv->framesync); @@ -881,11 +924,14 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel) switch (priv->rf_chip) { case RF_8256: - PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement + /* need further implement */ + PHY_SetRF8256CCKTxPower(dev, powerlevel); PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); break; default: - RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__); + RT_TRACE((COMP_PHY|COMP_ERR), + "error RF chipID(8225 or 8258) in function %s()\n", + __FUNCTION__); break; } return; @@ -944,10 +990,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, for (i = 0; i < RadioA_ArrayLength; i = i+2) { if (rtl819XRadioA_Array[i] == 0xfe) { - mdelay(100); - continue; + mdelay(100); + continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]); + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioA_Array[i], + bMask12Bits, + rtl819XRadioA_Array[i+1]); mdelay(1); } @@ -956,10 +1005,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, for (i = 0; i < RadioB_ArrayLength; i = i+2) { if (rtl819XRadioB_Array[i] == 0xfe) { - mdelay(100); - continue; + mdelay(100); + continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]); + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioB_Array[i], + bMask12Bits, + rtl819XRadioB_Array[i+1]); mdelay(1); } @@ -968,10 +1020,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, for (i = 0; i < RadioC_ArrayLength; i = i+2) { if (rtl819XRadioC_Array[i] == 0xfe) { - mdelay(100); - continue; + mdelay(100); + continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]); + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioC_Array[i], + bMask12Bits, + rtl819XRadioC_Array[i+1]); mdelay(1); } @@ -980,10 +1035,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, for (i = 0; i < RadioD_ArrayLength; i = i+2) { if (rtl819XRadioD_Array[i] == 0xfe) { - mdelay(100); - continue; + mdelay(100); + continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]); + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioD_Array[i], + bMask12Bits, + rtl819XRadioD_Array[i+1]); mdelay(1); } @@ -1025,7 +1083,7 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) case RF_8258: break; default: - RT_TRACE(COMP_ERR, "unknown rf chip ID in rtl8192_SetTxPowerLevel()\n"); + RT_TRACE(COMP_ERR, "unknown rf chip ID in %s()\n", __func__); break; } return; @@ -1054,90 +1112,103 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, priv->SetRFPowerStateInProgress = true; switch (priv->rf_chip) { - case RF_8256: + case RF_8256: switch (eRFPowerState) { - case eRfOn: - /* RF-A, RF-B */ - /* enable RF-Chip A/B */ - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); /* 0x860[4] */ - /* analog to digital on */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3); /* 0x88c[9:8] */ - /* digital to analog on */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); /* 0x880[4:3] */ - /* rx antenna on */ - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3); /* 0xc04[1:0] */ - /* rx antenna on */ - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3); /* 0xd04[1:0] */ - /* analog to digital part2 on */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); /* 0x880[6:5] */ + case eRfOn: + /* RF-A, RF-B */ + /* enable RF-Chip A/B - 0x860[4] */ + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, + 0x1); + /* analog to digital on - 0x88c[9:8] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, + 0x3); + /* digital to analog on - 0x880[4:3] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, + 0x3); + /* rx antenna on - 0xc04[1:0] */ + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3); + /* rx antenna on - 0xd04[1:0] */ + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3); + /* analog to digital part2 on - 0x880[6:5] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, + 0x3); - break; - - case eRfSleep: + break; - break; + case eRfSleep: - case eRfOff: - /* RF-A, RF-B */ - /* disable RF-Chip A/B */ - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); /* 0x860[4] */ - /* analog to digital off, for power save */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0); /* 0x88c[11:8] */ - /* digital to analog off, for power save */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); /* 0x880[4:3] */ - /* rx antenna off */ - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0); /* 0xc04[3:0] */ - /* rx antenna off */ - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); /* 0xd04[3:0] */ - /* analog to digital part2 off, for power save */ - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); /* 0x880[6:5] */ + break; - break; + case eRfOff: + /* RF-A, RF-B */ + /* disable RF-Chip A/B - 0x860[4] */ + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, + 0x0); + /* analog to digital off, for power save */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, + 0x0); /* 0x88c[11:8] */ + /* digital to analog off, for power save - 0x880[4:3] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, + 0x0); + /* rx antenna off - 0xc04[3:0] */ + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0); + /* rx antenna off - 0xd04[3:0] */ + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); + /* analog to digital part2 off, for power save */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, + 0x0); /* 0x880[6:5] */ - default: - bResult = false; - RT_TRACE(COMP_ERR, "SetRFPowerState819xUsb(): unknow state to set: 0x%X!!!\n", eRFPowerState); - break; - } break; + default: - RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip); + bResult = false; + RT_TRACE(COMP_ERR, "%s(): unknown state to set: 0x%X\n", + __func__, eRFPowerState); break; + } + break; + default: + RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip); + break; } #ifdef TO_DO_LIST if (bResult) { /* Update current RF state variable. */ pHalData->eRFPowerState = eRFPowerState; switch (pHalData->RFChipID) { - case RF_8256: - switch (pHalData->eRFPowerState) { - case eRfOff: - /* If Rf off reason is from IPS, LED should blink with no link */ - if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS) - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); - else - /* Turn off LED if RF is not ON. */ - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); - break; - - case eRfOn: - /* Turn on RF we are still linked, which might happen when we quickly turn off and on HW RF. */ - if (pMgntInfo->bMediaConnect == TRUE) - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); - else - /* Turn off LED if RF is not ON. */ - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); - break; - - default: - break; - } + case RF_8256: + switch (pHalData->eRFPowerState) { + case eRfOff: + /* If Rf off reason is from IPS, + LED should blink with no link */ + if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS) + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + else + /* Turn off LED if RF is not ON. */ + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); break; - default: - RT_TRACE(COMP_RF, DBG_LOUD, ("SetRFPowerState8190(): Unknown RF type\n")); - break; + case eRfOn: + /* Turn on RF we are still linked, which might + happen when we quickly turn off and on HW RF. + */ + if (pMgntInfo->bMediaConnect == TRUE) + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); + else + /* Turn off LED if RF is not ON. */ + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + break; + + default: + break; } + break; + + default: + RT_TRACE(COMP_RF, DBG_LOUD, "%s(): Unknown RF type\n", + __func__); + break; + } } #endif @@ -1166,12 +1237,12 @@ u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx, SwChnlCmd *pCmd; if (CmdTable == NULL) { - RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"); + RT_TRACE(COMP_ERR, "%s(): CmdTable cannot be NULL\n", __func__); return false; } if (CmdTableIdx >= CmdTableSz) { - RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", - CmdTableIdx, CmdTableSz); + RT_TRACE(COMP_ERR, "%s(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", + __func__, CmdTableIdx, CmdTableSz); return false; } @@ -1199,124 +1270,145 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u8 *step, u32 *delay) { struct r8192_priv *priv = ieee80211_priv(dev); - SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; - u32 PreCommonCmdCnt; - SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; - u32 PostCommonCmdCnt; - SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; - u32 RfDependCmdCnt; - SwChnlCmd *CurrentCmd = NULL; + SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; + u32 PreCommonCmdCnt; + SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; + u32 PostCommonCmdCnt; + SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; + u32 RfDependCmdCnt; + SwChnlCmd *CurrentCmd = NULL; u8 eRFPath; - RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel); + RT_TRACE(COMP_CH, "%s() stage: %d, step: %d, channel: %d\n", + __FUNCTION__, *stage, *step, channel); if (!IsLegalChannel(priv->ieee80211, channel)) { - RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); + RT_TRACE(COMP_ERR, "set to illegal channel: %d\n", channel); /* return true to tell upper caller function this channel setting is finished! Or it will in while loop. */ return true; } -/* FIXME: need to check whether channel is legal or not here */ + /* FIXME: need to check whether channel is legal or not here */ - /* <1> Fill up pre common command. */ - PreCommonCmdCnt = 0; - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, - CmdID_SetTxPowerLevel, 0, 0, 0); - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, - CmdID_End, 0, 0, 0); + /* <1> Fill up pre common command. */ + PreCommonCmdCnt = 0; + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, + MAX_PRECMD_CNT, CmdID_SetTxPowerLevel, + 0, 0, 0); + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, + MAX_PRECMD_CNT, CmdID_End, 0, 0, 0); - /* <2> Fill up post common command. */ - PostCommonCmdCnt = 0; + /* <2> Fill up post common command. */ + PostCommonCmdCnt = 0; - rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, - CmdID_End, 0, 0, 0); + rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, + MAX_POSTCMD_CNT, CmdID_End, 0, 0, 0); - /* <3> Fill up RF dependent command. */ - RfDependCmdCnt = 0; - switch (priv->rf_chip) { - case RF_8225: - if (!(channel >= 1 && channel <= 14)) { - RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel); - return true; - } - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_RF_WriteReg, rZebra1_Channel, RF_CHANNEL_TABLE_ZEBRA[channel], 10); - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_End, 0, 0, 0); - break; - - case RF_8256: - /* TEST!! This is not the table for 8256!! */ - if (!(channel >= 1 && channel <= 14)) { - RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel); - return true; - } - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_RF_WriteReg, rZebra1_Channel, channel, 10); - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_End, 0, 0, 0); - break; - - case RF_8258: - break; + /* <3> Fill up RF dependent command. */ + RfDependCmdCnt = 0; + switch (priv->rf_chip) { + case RF_8225: + if (!(channel >= 1 && channel <= 14)) { + RT_TRACE(COMP_ERR, + "illegal channel for Zebra 8225: %d\n", + channel); + return true; + } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, + rZebra1_Channel, + RF_CHANNEL_TABLE_ZEBRA[channel], + 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; - default: - RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + case RF_8256: + /* TEST!! This is not the table for 8256!! */ + if (!(channel >= 1 && channel <= 14)) { + RT_TRACE(COMP_ERR, + "illegal channel for Zebra 8256: %d\n", + channel); return true; - break; } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, + rZebra1_Channel, channel, 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + case RF_8258: + break; - do { - switch (*stage) { - case 0: - CurrentCmd = &PreCommonCmd[*step]; - break; - case 1: - CurrentCmd = &RfDependCmd[*step]; - break; - case 2: - CurrentCmd = &PostCommonCmd[*step]; - break; - } + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + return true; + break; + } - if (CurrentCmd->CmdID == CmdID_End) { - if ((*stage) == 2) { - (*delay) = CurrentCmd->msDelay; - return true; - } else { - (*stage)++; - (*step) = 0; - continue; - } - } - switch (CurrentCmd->CmdID) { - case CmdID_SetTxPowerLevel: - if (priv->card_8192_version == (u8)VERSION_819xU_A) - /* consider it later! */ - rtl8192_SetTxPowerLevel(dev, channel); - break; - case CmdID_WritePortUlong: - write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2); - break; - case CmdID_WritePortUshort: - write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2); - break; - case CmdID_WritePortUchar: - write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2); - break; - case CmdID_RF_WriteReg: - for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) { - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2); - } - break; - default: - break; + do { + switch (*stage) { + case 0: + CurrentCmd = &PreCommonCmd[*step]; + break; + case 1: + CurrentCmd = &RfDependCmd[*step]; + break; + case 2: + CurrentCmd = &PostCommonCmd[*step]; + break; + } + + if (CurrentCmd->CmdID == CmdID_End) { + if ((*stage) == 2) { + (*delay) = CurrentCmd->msDelay; + return true; + } else { + (*stage)++; + (*step) = 0; + continue; } + } + switch (CurrentCmd->CmdID) { + case CmdID_SetTxPowerLevel: + if (priv->card_8192_version == (u8)VERSION_819xU_A) + /* consider it later! */ + rtl8192_SetTxPowerLevel(dev, channel); break; - } while (true); + case CmdID_WritePortUlong: + write_nic_dword(dev, CurrentCmd->Para1, + CurrentCmd->Para2); + break; + case CmdID_WritePortUshort: + write_nic_word(dev, CurrentCmd->Para1, + (u16)CurrentCmd->Para2); + break; + case CmdID_WritePortUchar: + write_nic_byte(dev, CurrentCmd->Para1, + (u8)CurrentCmd->Para2); + break; + case CmdID_RF_WriteReg: + for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) { + rtl8192_phy_SetRFReg(dev, + (RF90_RADIO_PATH_E)eRFPath, + CurrentCmd->Para1, + bZebra1_ChannelNum, + CurrentCmd->Para2); + } + break; + default: + break; + } + + break; + } while (true); (*delay) = CurrentCmd->msDelay; (*step)++; @@ -1336,7 +1428,8 @@ void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) struct r8192_priv *priv = ieee80211_priv(dev); u32 delay = 0; - while (!rtl8192_phy_SwChnlStepByStep(dev, channel, &priv->SwChnlStage, &priv->SwChnlStep, &delay)) { + while (!rtl8192_phy_SwChnlStepByStep(dev, channel, &priv->SwChnlStage, + &priv->SwChnlStep, &delay)) { if (!priv->up) break; } @@ -1353,7 +1446,8 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); - RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", priv->chan); + RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", + priv->chan); rtl8192_phy_FinishSwChnlNow(dev, priv->chan); @@ -1372,7 +1466,8 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev) u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) { struct r8192_priv *priv = ieee80211_priv(dev); - RT_TRACE(COMP_CH, "=====>%s(), SwChnlInProgress:%d\n", __FUNCTION__, priv->SwChnlInProgress); + RT_TRACE(COMP_CH, "%s(), SwChnlInProgress: %d\n", __FUNCTION__, + priv->SwChnlInProgress); if (!priv->up) return false; if (priv->SwChnlInProgress) @@ -1412,7 +1507,7 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) priv->SwChnlStage = 0; priv->SwChnlStep = 0; if (priv->up) - rtl8192_SwChnl_WorkItem(dev); + rtl8192_SwChnl_WorkItem(dev); priv->SwChnlInProgress = false; return true; @@ -1433,7 +1528,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); u8 regBwOpMode; - RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", \ + RT_TRACE(COMP_SWBW, "%s() Switch to %s bandwidth\n", __func__, priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); @@ -1446,80 +1541,93 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) read_nic_byte(dev, BW_OPMODE, ®BwOpMode); switch (priv->CurrentChannelBW) { - case HT_CHANNEL_WIDTH_20: - regBwOpMode |= BW_OPMODE_20MHZ; - /* We have not verify whether this register works */ - write_nic_byte(dev, BW_OPMODE, regBwOpMode); - break; + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + /* We have not verify whether this register works */ + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; - case HT_CHANNEL_WIDTH_20_40: - regBwOpMode &= ~BW_OPMODE_20MHZ; - /* We have not verify whether this register works */ - write_nic_byte(dev, BW_OPMODE, regBwOpMode); - break; + case HT_CHANNEL_WIDTH_20_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + /* We have not verify whether this register works */ + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; - default: - RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", priv->CurrentChannelBW); - break; + default: + RT_TRACE(COMP_ERR, + "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", + priv->CurrentChannelBW); + break; } /* <2> Set PHY related register */ switch (priv->CurrentChannelBW) { - case HT_CHANNEL_WIDTH_20: - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); - - /* Correct the tx power for CCK rate in 20M. */ - priv->cck_present_attentuation = - priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference; - - if (priv->cck_present_attentuation > 22) - priv->cck_present_attentuation = 22; - if (priv->cck_present_attentuation < 0) - priv->cck_present_attentuation = 0; - RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - - if (priv->chan == 14 && !priv->bcck_in_ch14) { - priv->bcck_in_ch14 = TRUE; - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } else if (priv->chan != 14 && priv->bcck_in_ch14) { - priv->bcck_in_ch14 = FALSE; - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } else { - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } + case HT_CHANNEL_WIDTH_20: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, + 0x00100000, 1); + + /* Correct the tx power for CCK rate in 20M. */ + priv->cck_present_attentuation = + priv->cck_present_attentuation_20Mdefault + + priv->cck_present_attentuation_difference; + + if (priv->cck_present_attentuation > 22) + priv->cck_present_attentuation = 22; + if (priv->cck_present_attentuation < 0) + priv->cck_present_attentuation = 0; + RT_TRACE(COMP_INIT, + "20M, pHalData->CCKPresentAttentuation = %d\n", + priv->cck_present_attentuation); + + if (priv->chan == 14 && !priv->bcck_in_ch14) { + priv->bcck_in_ch14 = TRUE; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else if (priv->chan != 14 && priv->bcck_in_ch14) { + priv->bcck_in_ch14 = FALSE; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else { + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } - break; - case HT_CHANNEL_WIDTH_20_40: - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); - rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); - rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); - priv->cck_present_attentuation = - priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference; - - if (priv->cck_present_attentuation > 22) - priv->cck_present_attentuation = 22; - if (priv->cck_present_attentuation < 0) - priv->cck_present_attentuation = 0; - - RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - if (priv->chan == 14 && !priv->bcck_in_ch14) { - priv->bcck_in_ch14 = true; - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } else if (priv->chan != 14 && priv->bcck_in_ch14) { - priv->bcck_in_ch14 = false; - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } else { - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); - } + break; + case HT_CHANNEL_WIDTH_20_40: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, + priv->nCur40MhzPrimeSC>>1); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, + priv->nCur40MhzPrimeSC); + priv->cck_present_attentuation = + priv->cck_present_attentuation_40Mdefault + + priv->cck_present_attentuation_difference; + + if (priv->cck_present_attentuation > 22) + priv->cck_present_attentuation = 22; + if (priv->cck_present_attentuation < 0) + priv->cck_present_attentuation = 0; + + RT_TRACE(COMP_INIT, + "40M, pHalData->CCKPresentAttentuation = %d\n", + priv->cck_present_attentuation); + if (priv->chan == 14 && !priv->bcck_in_ch14) { + priv->bcck_in_ch14 = true; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else if (priv->chan != 14 && priv->bcck_in_ch14) { + priv->bcck_in_ch14 = false; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else { + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } - break; - default: - RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", priv->CurrentChannelBW); - break; + break; + default: + RT_TRACE(COMP_ERR, + "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", + priv->CurrentChannelBW); + break; } /* Skip over setting of J-mode in BB register here. @@ -1527,29 +1635,30 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) /* <3> Set RF related register */ switch (priv->rf_chip) { - case RF_8225: + case RF_8225: #ifdef TO_DO_LIST - PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); + PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); #endif - break; + break; - case RF_8256: - PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); - break; + case RF_8256: + PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; - case RF_8258: - break; + case RF_8258: + break; - case RF_PSEUDO_11N: - break; + case RF_PSEUDO_11N: + break; - default: - RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); - break; + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + break; } priv->SetBWModeInProgress = false; - RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw))); + RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", + atomic_read(&priv->ieee80211->atm_swbw)); } /****************************************************************************** @@ -1596,9 +1705,11 @@ void InitialGain819xUsb(struct net_device *dev, u8 Operation) extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) { - struct delayed_work *dwork = container_of(work, struct delayed_work, work); - struct r8192_priv *priv = container_of(dwork, struct r8192_priv, initialgain_operate_wq); - struct net_device *dev = priv->ieee80211->dev; + struct delayed_work *dwork = container_of(work, struct delayed_work, + work); + struct r8192_priv *priv = container_of(dwork, struct r8192_priv, + initialgain_operate_wq); + struct net_device *dev = priv->ieee80211->dev; #define SCAN_RX_INITIAL_GAIN 0x17 #define POWER_DETECTION_TH 0x08 u32 bitmask; @@ -1608,68 +1719,90 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) Operation = priv->InitialGainOperateType; switch (Operation) { - case IG_Backup: - RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); - initial_gain = SCAN_RX_INITIAL_GAIN; - bitmask = bMaskByte0; - if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - /* FW DIG OFF */ - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); - priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bitmask); - priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bitmask); - priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bitmask); - priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bitmask); - bitmask = bMaskByte2; - priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bitmask); - - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n", priv->initgain_backup.xaagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n", priv->initgain_backup.xbagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n", priv->initgain_backup.xcagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n", priv->initgain_backup.xdagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n", priv->initgain_backup.cca); - - RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain); - write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); - RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH); - write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); - break; - case IG_Restore: - RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); - bitmask = 0x7f; /* Bit0 ~ Bit6 */ - if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - /* FW DIG OFF */ - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); - - rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bitmask, (u32)priv->initgain_backup.xaagccore1); - rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bitmask, (u32)priv->initgain_backup.xbagccore1); - rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bitmask, (u32)priv->initgain_backup.xcagccore1); - rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bitmask, (u32)priv->initgain_backup.xdagccore1); - bitmask = bMaskByte2; - rtl8192_setBBreg(dev, rCCK0_CCA, bitmask, (u32)priv->initgain_backup.cca); - - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n", priv->initgain_backup.xaagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n", priv->initgain_backup.xbagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n", priv->initgain_backup.xcagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n", priv->initgain_backup.xdagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n", priv->initgain_backup.cca); + case IG_Backup: + RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); + initial_gain = SCAN_RX_INITIAL_GAIN; + bitmask = bMaskByte0; + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG OFF */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); + priv->initgain_backup.xaagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bitmask); + priv->initgain_backup.xbagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bitmask); + priv->initgain_backup.xcagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bitmask); + priv->initgain_backup.xdagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bitmask); + bitmask = bMaskByte2; + priv->initgain_backup.cca = + (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bitmask); + + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n", + priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n", + priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n", + priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n", + priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n", + priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", + initial_gain); + write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); + RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", + POWER_DETECTION_TH); + write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); + break; + case IG_Restore: + RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); + bitmask = 0x7f; /* Bit0 ~ Bit6 */ + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG OFF */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); + + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bitmask, + (u32)priv->initgain_backup.xaagccore1); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bitmask, + (u32)priv->initgain_backup.xbagccore1); + rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bitmask, + (u32)priv->initgain_backup.xcagccore1); + rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bitmask, + (u32)priv->initgain_backup.xdagccore1); + bitmask = bMaskByte2; + rtl8192_setBBreg(dev, rCCK0_CCA, bitmask, + (u32)priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n", + priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n", + priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n", + priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n", + priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n", + priv->initgain_backup.cca); #ifdef RTL8190P - SetTxPowerLevel8190(Adapter, priv->CurrentChannel); + SetTxPowerLevel8190(Adapter, priv->CurrentChannel); #endif #ifdef RTL8192E - SetTxPowerLevel8190(Adapter, priv->CurrentChannel); + SetTxPowerLevel8190(Adapter, priv->CurrentChannel); #endif - rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel); + rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel); - if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - /* FW DIG ON */ - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); - break; - default: - RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n"); - break; + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG ON */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); + break; + default: + RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n"); + break; } } -- 2.39.5