From 1db97f258966878317ece10868eaca99201d5884 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 28 Aug 2014 13:53:13 -0700 Subject: [PATCH] ntb: conslidate reading of PPD to move platform detection earlier To simplify some of the platform detection code. Move the platform detection to a function to be called earlier. Signed-off-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/ntb_hw.c | 126 +++++++++++++++++++++++++++++++++---------- 1 file changed, 98 insertions(+), 28 deletions(-) diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index 7567452250df..6f1c92182f35 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -702,24 +702,8 @@ static void bwd_link_poll(struct work_struct *work) static int ntb_xeon_setup(struct ntb_device *ndev) { - int rc; - u8 val; - - ndev->hw_type = SNB_HW; - - rc = pci_read_config_byte(ndev->pdev, NTB_PPD_OFFSET, &val); - if (rc) - return rc; - - if (val & SNB_PPD_DEV_TYPE) - ndev->dev_type = NTB_DEV_USD; - else - ndev->dev_type = NTB_DEV_DSD; - - switch (val & SNB_PPD_CONN_TYPE) { + switch (ndev->conn_type) { case NTB_CONN_B2B: - dev_info(&ndev->pdev->dev, "Conn Type = B2B\n"); - ndev->conn_type = NTB_CONN_B2B; ndev->reg_ofs.ldb = ndev->reg_base + SNB_PDOORBELL_OFFSET; ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_PDBMSK_OFFSET; ndev->reg_ofs.spad_read = ndev->reg_base + SNB_SPAD_OFFSET; @@ -835,9 +819,6 @@ static int ntb_xeon_setup(struct ntb_device *ndev) } break; case NTB_CONN_RP: - dev_info(&ndev->pdev->dev, "Conn Type = RP\n"); - ndev->conn_type = NTB_CONN_RP; - if (xeon_errata_workaround) { dev_err(&ndev->pdev->dev, "NTB-RP disabled due to hardware errata. To disregard this warning and potentially lock-up the system, add the parameter 'xeon_errata_workaround=0'.\n"); @@ -867,8 +848,6 @@ static int ntb_xeon_setup(struct ntb_device *ndev) ndev->limits.max_mw = SNB_MAX_MW; break; case NTB_CONN_TRANSPARENT: - dev_info(&ndev->pdev->dev, "Conn Type = TRANSPARENT\n"); - ndev->conn_type = NTB_CONN_TRANSPARENT; /* Scratch pads need to have exclusive access from the primary * or secondary side. Halve the num spads so that each side can * have an equal amount. @@ -890,10 +869,10 @@ static int ntb_xeon_setup(struct ntb_device *ndev) ndev->limits.max_mw = SNB_MAX_MW; break; default: - /* Most likely caused by the remote NTB-RP device not being - * configured + /* + * we should never hit this. the detect function should've + * take cared of everything. */ - dev_err(&ndev->pdev->dev, "Unknown PPD %x\n", val); return -EINVAL; } @@ -977,9 +956,6 @@ static int ntb_device_setup(struct ntb_device *ndev) if (rc) return rc; - dev_info(&ndev->pdev->dev, "Device Type = %s\n", - ndev->dev_type == NTB_DEV_USD ? "USD/DSP" : "DSD/USP"); - if (ndev->conn_type == NTB_CONN_B2B) /* Enable Bus Master and Memory Space on the secondary side */ writew(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, @@ -1519,6 +1495,96 @@ static void ntb_hw_link_down(struct ntb_device *ndev) writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); } +static int ntb_xeon_detect(struct ntb_device *ndev) +{ + int rc; + u8 ppd; + + ndev->hw_type = SNB_HW; + + rc = pci_read_config_byte(ndev->pdev, NTB_PPD_OFFSET, &ppd); + if (rc) + return -EIO; + + if (ppd & SNB_PPD_DEV_TYPE) + ndev->dev_type = NTB_DEV_USD; + else + ndev->dev_type = NTB_DEV_DSD; + + switch (ppd & SNB_PPD_CONN_TYPE) { + case NTB_CONN_B2B: + dev_info(&ndev->pdev->dev, "Conn Type = B2B\n"); + ndev->conn_type = NTB_CONN_B2B; + break; + case NTB_CONN_RP: + dev_info(&ndev->pdev->dev, "Conn Type = RP\n"); + ndev->conn_type = NTB_CONN_RP; + break; + case NTB_CONN_TRANSPARENT: + dev_info(&ndev->pdev->dev, "Conn Type = TRANSPARENT\n"); + ndev->conn_type = NTB_CONN_TRANSPARENT; + /* + * This mode is default to USD/DSP. HW does not report + * properly in transparent mode as it has no knowledge of + * NTB. We will just force correct here. + */ + ndev->dev_type = NTB_DEV_USD; + break; + default: + dev_err(&ndev->pdev->dev, "Unknown PPD %x\n", ppd); + return -ENODEV; + } + + return 0; +} + +static int ntb_atom_detect(struct ntb_device *ndev) +{ + int rc; + u32 ppd; + + ndev->hw_type = BWD_HW; + + rc = pci_read_config_dword(ndev->pdev, NTB_PPD_OFFSET, &ppd); + if (rc) + return rc; + + switch ((ppd & BWD_PPD_CONN_TYPE) >> 8) { + case NTB_CONN_B2B: + dev_info(&ndev->pdev->dev, "Conn Type = B2B\n"); + ndev->conn_type = NTB_CONN_B2B; + break; + case NTB_CONN_RP: + default: + dev_err(&ndev->pdev->dev, "Unsupported NTB configuration\n"); + return -EINVAL; + } + + if (ppd & BWD_PPD_DEV_TYPE) + ndev->dev_type = NTB_DEV_DSD; + else + ndev->dev_type = NTB_DEV_USD; + + return 0; +} + +static int ntb_device_detect(struct ntb_device *ndev) +{ + int rc; + + if (is_ntb_xeon(ndev)) + rc = ntb_xeon_detect(ndev); + else if (is_ntb_atom(ndev)) + rc = ntb_atom_detect(ndev); + else + rc = -ENODEV; + + dev_info(&ndev->pdev->dev, "Device Type = %s\n", + ndev->dev_type == NTB_DEV_USD ? "USD/DSP" : "DSD/USP"); + + return 0; +} + static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ntb_device *ndev; @@ -1539,6 +1605,10 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(ndev->pdev); + rc = ntb_device_detect(ndev); + if (rc) + goto err; + rc = pci_request_selected_regions(pdev, NTB_BAR_MASK, KBUILD_MODNAME); if (rc) goto err1; -- 2.39.5