From 1f323cfda5feee4e9c1fc09ededaee849f906468 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 19 Jan 2010 15:30:54 +0900 Subject: [PATCH] ARM: SAMSUNG: Move GPIO common functions to plat-samsung This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by: Adityapratap Sharma Signed-off-by: Atul Dahiya Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/gpio-core.h | 28 +++ arch/arm/plat-s3c64xx/Kconfig | 1 + arch/arm/plat-s3c64xx/gpiolib.c | 162 +---------------- arch/arm/plat-samsung/Kconfig | 7 + arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/gpiolib.c | 197 +++++++++++++++++++++ 6 files changed, 236 insertions(+), 160 deletions(-) create mode 100644 arch/arm/plat-samsung/gpiolib.c diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h index 32af612767aa..94fed584d5ae 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -11,6 +11,11 @@ * published by the Free Software Foundation. */ +#define GPIOCON_OFF (0x00) +#define GPIODAT_OFF (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + /* Define the core gpiolib support functions that the s3c platforms may * need to extend or change depending on the hardware and the s3c chip * selected at build or found at run time. @@ -80,6 +85,29 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * and any other necessary functions. */ +/** + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ +extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips); +extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips); + +extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); +extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index 0fba1f956b8a..37b4519fb832 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -22,6 +22,7 @@ config PLAT_S3C64XX select S3C_GPIO_CFG_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI + select SAMSUNG_GPIOLIB_4BIT help Base platform code for any Samsung S3C64XX device diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 778560457277..265e23b6de8e 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -49,150 +49,6 @@ * [2] BANK has two control registers, GPxCON0 and GPxCON1 */ -#define OFF_GPCON (0x00) -#define OFF_GPDAT (0x04) - -#define con_4bit_shift(__off) ((__off) * 4) - -#if 1 -#define gpio_dbg(x...) do { } while(0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + OFF_GPCON); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, base + OFF_GPCON); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. -*/ - -static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; - -} - -static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, regcon); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -399,20 +255,6 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }; -static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) { chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); @@ -432,10 +274,10 @@ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, static __init int s3c64xx_gpiolib_init(void) { s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - s3c64xx_gpiolib_add_4bit); + samsung_gpiolib_add_4bit); s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - s3c64xx_gpiolib_add_4bit2); + samsung_gpiolib_add_4bit2); s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), s3c64xx_gpiolib_add_2bit); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index e6c122967355..6484b5bf82c3 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -33,6 +33,13 @@ config SAMSUNG_IRQ_UART # options for gpio configuration support +config SAMSUNG_GPIOLIB_4BIT + bool + help + GPIOlib file contains the 4 bit modification functions for gpio + configuration. GPIOlib shall be compiled only for S3C64XX and S5P + series of processors. + config S3C_GPIO_CFG_S3C24XX bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index ceac416d80b8..1fc8d471c6ee 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,6 +15,7 @@ obj-y += clock.o obj-y += pwm-clock.o obj-y += gpio-config.o +obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c new file mode 100644 index 000000000000..3419b67f4221 --- /dev/null +++ b/arch/arm/plat-samsung/gpiolib.c @@ -0,0 +1,197 @@ +/* arch/arm/plat-samsung/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +int samsung_gpiolib_4bit_input(struct gpio_chip *chip, unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. +*/ + +int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit2(chip); + s3c_gpiolib_add(chip); + } +} -- 2.39.5