From 23500189d7e03a071f0746f43f2cce875a62c91c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 21:40:52 -0700 Subject: [PATCH] Bluetooth: Introduce new HCI socket channel for user operation This patch introcuces a new HCI socket channel that allows user applications to take control over a specific HCI device. The application gains exclusive access to this device and forces the kernel to stay away and not manage it. In case of the management interface it will actually hide the device. Such operation is useful for security testing tools that need to operate underneath the Bluetooth stack and need full control over a device. The advantage here is that the kernel still provides the service of hardware abstraction and HCI level access. The use of Bluetooth drivers for hardware access also means that sniffing tools like btmon or hcidump are still working and the whole set of transaction can be traced with existing tools. With the new channel it is possible to send HCI commands, ACL and SCO data packets and receive HCI events, ACL and SCO packets from the device. The format follows the well established H:4 protocol. The new HCI user channel can only be established when a device has been through its setup routine and is currently powered down. This is enforced to not cause any problems with current operations. In addition only one user channel per HCI device is allowed. It is exclusive access for one user application. Access to this channel is limited to process with CAP_NET_RAW capability. Using this new facility does not require any external library or special ioctl or socket filters. Just create the socket and bind it. After that the file descriptor is ready to speak H:4 protocol. struct sockaddr_hci addr; int fd; fd = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI); memset(&addr, 0, sizeof(addr)); addr.hci_family = AF_BLUETOOTH; addr.hci_dev = 0; addr.hci_channel = HCI_CHANNEL_USER; bind(fd, (struct sockaddr *) &addr, sizeof(addr)); The example shows on how to create a user channel for hci0 device. Error handling has been left out of the example. However with the limitations mentioned above it is advised to handle errors. Binding of the user cahnnel socket can fail for various reasons. Specifically if the device is currently activated by BlueZ or if the access permissions are not present. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 1 + net/bluetooth/hci_sock.c | 86 ++++++++++++++++++++++++++++++++++--- 2 files changed, 82 insertions(+), 5 deletions(-) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 128157db0680..30c88b585c1b 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1571,6 +1571,7 @@ struct sockaddr_hci { #define HCI_DEV_NONE 0xffff #define HCI_CHANNEL_RAW 0 +#define HCI_CHANNEL_USER 1 #define HCI_CHANNEL_MONITOR 2 #define HCI_CHANNEL_CONTROL 3 diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 59e68f199178..c09e97638065 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -126,11 +126,20 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb) if (skb->sk == sk) continue; - if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) - continue; - - if (is_filtered_packet(sk, skb)) + if (hci_pi(sk)->channel == HCI_CHANNEL_RAW) { + if (is_filtered_packet(sk, skb)) + continue; + } else if (hci_pi(sk)->channel == HCI_CHANNEL_USER) { + if (!bt_cb(skb)->incoming) + continue; + if (bt_cb(skb)->pkt_type != HCI_EVENT_PKT && + bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && + bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) + continue; + } else { + /* Don't send frame to other channel types */ continue; + } if (!skb_copy) { /* Create a private copy with headroom */ @@ -444,6 +453,12 @@ static int hci_sock_release(struct socket *sock) bt_sock_unlink(&hci_sk_list, sk); if (hdev) { + if (hci_pi(sk)->channel == HCI_CHANNEL_USER) { + mgmt_index_added(hdev); + clear_bit(HCI_USER_CHANNEL, &hdev->dev_flags); + hci_dev_close(hdev->id); + } + atomic_dec(&hdev->promisc); hci_dev_put(hdev); } @@ -661,6 +676,56 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, hci_pi(sk)->hdev = hdev; break; + case HCI_CHANNEL_USER: + if (hci_pi(sk)->hdev) { + err = -EALREADY; + goto done; + } + + if (haddr.hci_dev == HCI_DEV_NONE) { + err = -EINVAL; + goto done; + } + + if (!capable(CAP_NET_RAW)) { + err = -EPERM; + goto done; + } + + hdev = hci_dev_get(haddr.hci_dev); + if (!hdev) { + err = -ENODEV; + goto done; + } + + if (test_bit(HCI_UP, &hdev->flags) || + test_bit(HCI_INIT, &hdev->flags) || + test_bit(HCI_SETUP, &hdev->dev_flags)) { + err = -EBUSY; + hci_dev_put(hdev); + goto done; + } + + if (test_and_set_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = -EUSERS; + hci_dev_put(hdev); + goto done; + } + + mgmt_index_removed(hdev); + + err = hci_dev_open(hdev->id); + if (err) { + clear_bit(HCI_USER_CHANNEL, &hdev->dev_flags); + hci_dev_put(hdev); + goto done; + } + + atomic_inc(&hdev->promisc); + + hci_pi(sk)->hdev = hdev; + break; + case HCI_CHANNEL_CONTROL: if (haddr.hci_dev != HCI_DEV_NONE) { err = -EINVAL; @@ -807,6 +872,7 @@ static int hci_sock_recvmsg(struct kiocb *iocb, struct socket *sock, case HCI_CHANNEL_RAW: hci_sock_cmsg(sk, msg, skb); break; + case HCI_CHANNEL_USER: case HCI_CHANNEL_CONTROL: case HCI_CHANNEL_MONITOR: sock_recv_timestamp(msg, sk, skb); @@ -841,6 +907,7 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, switch (hci_pi(sk)->channel) { case HCI_CHANNEL_RAW: + case HCI_CHANNEL_USER: break; case HCI_CHANNEL_CONTROL: err = mgmt_control(sk, msg, len); @@ -877,7 +944,8 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, skb_pull(skb, 1); skb->dev = (void *) hdev; - if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { + if (hci_pi(sk)->channel == HCI_CHANNEL_RAW && + bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { u16 opcode = get_unaligned_le16(skb->data); u16 ogf = hci_opcode_ogf(opcode); u16 ocf = hci_opcode_ocf(opcode); @@ -908,6 +976,14 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, goto drop; } + if (hci_pi(sk)->channel == HCI_CHANNEL_USER && + bt_cb(skb)->pkt_type != HCI_COMMAND_PKT && + bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && + bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) { + err = -EINVAL; + goto drop; + } + skb_queue_tail(&hdev->raw_q, skb); queue_work(hdev->workqueue, &hdev->tx_work); } -- 2.39.5