From 243292a2ad3dc365849b820a64868927168894ac Mon Sep 17 00:00:00 2001 From: Zhuang Jin Can Date: Tue, 21 Jul 2015 17:20:29 +0300 Subject: [PATCH] xhci: report U3 when link is in resume state xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Cc: Signed-off-by: Zhuang Jin Can Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index e75c565feb53..7df8878cc37b 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 pls = status_reg & PORT_PLS_MASK; /* resume state is a xHCI internal state. - * Do not report it to usb core. + * Do not report it to usb core, instead, pretend to be U3, + * thus usb core knows it's not ready for transfer */ - if (pls == XDEV_RESUME) + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; return; + } /* When the CAS bit is set then warm reset * should be performed on port -- 2.39.5