From 271c5c59e00302494ffc299741e7fa2d63103e76 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 4 Jun 2008 17:43:22 +0100 Subject: [PATCH] [MTD] DataFlash: use proper types Signed-off-by: David Woodhouse --- drivers/mtd/devices/mtd_dataflash.c | 32 ++++++++++++++--------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index acc3728872e3..54e36bfc2c3b 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -82,7 +82,7 @@ struct dataflash { - u8 command[4]; + uint8_t command[4]; char name[24]; unsigned partitioned:1; @@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) struct spi_transfer x = { .tx_dma = 0, }; struct spi_message msg; unsigned blocksize = priv->page_size << 3; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", spi->dev.bus_id, @@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) pageaddr = pageaddr << priv->page_offset; command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; - command[1] = (u8)(pageaddr >> 16); - command[2] = (u8)(pageaddr >> 8); + command[1] = (uint8_t)(pageaddr >> 16); + command[2] = (uint8_t)(pageaddr >> 8); command[3] = 0; DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", @@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, struct spi_transfer x[2] = { { .tx_dma = 0, }, }; struct spi_message msg; unsigned int addr; - u8 *command; + uint8_t *command; int status; DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", @@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, * fewer "don't care" bytes. Both buffers stay unchanged. */ command[0] = OP_READ_CONTINUOUS; - command[1] = (u8)(addr >> 16); - command[2] = (u8)(addr >> 8); - command[3] = (u8)(addr >> 0); + command[1] = (uint8_t)(addr >> 16); + command[2] = (uint8_t)(addr >> 8); + command[3] = (uint8_t)(addr >> 0); /* plus 4 "don't care" bytes */ status = spi_sync(priv->spi, &msg); @@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t remaining = len; u_char *writebuf = (u_char *) buf; int status = -EINVAL; - u8 *command; + uint8_t *command; DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); @@ -539,16 +539,16 @@ struct flash_info { * a high byte of zero plus three data bytes: the manufacturer id, * then a two byte device id. */ - u32 jedec_id; + uint32_t jedec_id; /* The size listed here is what works with OPCODE_SE, which isn't * necessarily called a "sector" by the vendor. */ unsigned nr_pages; - u16 pagesize; - u16 pageoffset; + uint16_t pagesize; + uint16_t pageoffset; - u16 flags; + uint16_t flags; #define SUP_POW2PS 0x02 #define IS_POW2PS 0x01 }; @@ -582,9 +582,9 @@ static struct flash_info __devinitdata dataflash_data [] = { static struct flash_info *__devinit jedec_probe(struct spi_device *spi) { int tmp; - u8 code = OP_READ_ID; - u8 id[3]; - u32 jedec; + uint8_t code = OP_READ_ID; + uint8_t id[3]; + uint32_t jedec; struct flash_info *info; int status; -- 2.39.2