From 28378d5ed5ca1221479d2f94c3b346691834822f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 26 Feb 2015 10:54:27 -0600 Subject: [PATCH] usb: musb: core: fix highspeed check FSDEV is set for both HIGH and FULL speeds, the correct HIGHSPEED check is done through power register's HSMODE bit. Tested-by: Bin Liu Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 21ab26636631..cf7b10e5963e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -880,16 +880,23 @@ b_host: if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; if (devctl & MUSB_DEVCTL_HM) { + u8 power = musb_readl(musb->mregs, MUSB_POWER); + /* * Looks like non-HS BABBLE can be ignored, but - * HS BABBLE is an error condition. For HS the solution - * is to avoid babble in the first place and fix what - * caused BABBLE. When HS BABBLE happens we can only - * stop the session. + * HS BABBLE is an error condition. + * + * For HS the solution is to avoid babble in the first + * place and fix what caused BABBLE. + * + * When HS BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is drop + * the session. */ - if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) { - dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl); - } else { + if (power & MUSB_POWER_HSMODE) { ERR("Stopping host session -- babble\n"); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); } -- 2.39.5