From 2920adb6dfeded0b835a809a1a2c5772d97e5965 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 10 Apr 2013 16:58:31 +0300 Subject: [PATCH] serial: 8250_dw: Set port capabilities based on CPR register The Designware UART has an optional support for 16750 compatible Auto Flow Control. This will enable it based on the AFCE bit in Component Parameter Register. Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 09aaea2d3a6c..b7c7d6a6cad7 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -221,7 +221,11 @@ static void dw8250_setup_port(struct uart_8250_port *up) p->flags |= UPF_FIXED_TYPE; p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); up->tx_loadsz = p->fifosize; + up->capabilities = UART_CAP_FIFO; } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; } static int dw8250_probe(struct platform_device *pdev) -- 2.39.2