From 2a9d832cc9aae21ea827520fef635b6c49a06c6d Mon Sep 17 00:00:00 2001 From: Leif Lindholm Date: Thu, 27 Nov 2014 17:56:05 +0000 Subject: [PATCH] of: Add bindings for chosen node, stdout-path Add a global binding for the chosen node. Include a description of the stdout-path, and an explicit statement on its extra options in the context of a UART console. Opening description stolen from www.devicetree.org, and part of the remaining text provided by Mark Rutland. Signed-off-by: Leif Lindholm [grant.likely: remove reference to uart_parse_options] Reviewed-by: Mark Rutland Signed-off-by: Grant Likely --- Documentation/devicetree/bindings/chosen.txt | 46 ++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/chosen.txt diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt new file mode 100644 index 000000000000..ed838f453f7a --- /dev/null +++ b/Documentation/devicetree/bindings/chosen.txt @@ -0,0 +1,46 @@ +The chosen node +--------------- + +The chosen node does not represent a real device, but serves as a place +for passing data between firmware and the operating system, like boot +arguments. Data in the chosen node does not represent the hardware. + + +stdout-path property +-------------------- + +Device trees may specify the device to be used for boot console output +with a stdout-path property under /chosen, as described in ePAPR, e.g. + +/ { + chosen { + stdout-path = "/serial@f00:115200"; + }; + + serial@f00 { + compatible = "vendor,some-uart"; + reg = <0xf00 0x10>; + }; +}; + +If the character ":" is present in the value, this terminates the path. +The meaning of any characters following the ":" is device-specific, and +must be specified in the relevant binding documentation. + +For UART devices, the preferred binding is a string in the form: + + {{{}}} + +where + + baud - baud rate in decimal + parity - 'n' (none), 'o', (odd) or 'e' (even) + bits - number of data bits + flow - 'r' (rts) + +For example: 115200n8r + +Implementation note: Linux will look for the property "linux,stdout-path" or +on PowerPC "stdout" if "stdout-path" is not found. However, the +"linux,stdout-path" and "stdout" properties are deprecated. New platforms +should only use the "stdout-path" property. -- 2.39.5