From 2b53d07891630dead46d65c8f896955fd3ae0302 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Mon, 16 Jan 2012 09:50:19 +0000 Subject: [PATCH] pch_gbe: Do not abort probe on bad MAC If the MAC is invalid or not implemented, do not abort the probe. Issue a warning and prevent bringing the interface up until a MAC is set manually (via ifconfig $IFACE hw ether $MAC). Tested on two platforms, one with a valid MAC, the other without a MAC. The real MAC is used if present, the interface fails to come up until the MAC is set on the other. They successfully get an IP over DHCP and pass a simple ping and login over ssh test. This is meant to allow the Inforce SYS940X development board: http://www.inforcecomputing.com/SYS940X_ECX.html (and others suffering from a missing MAC) to work with the mainline kernel. Without this patch, the probe will fail and the interface will not be created, preventing the user from configuring the MAC manually. This does not make any attempt to address a missing or invalid MAC for the pch_phub driver. Signed-off-by: Darren Hart CC: Arjan van de Ven CC: Alan Cox CC: Tomoya MORINAGA CC: Jeff Kirsher CC: "David S. Miller" CC: Paul Gortmaker CC: Jon Mason CC: netdev@vger.kernel.org CC: Mark Brown CC: David Laight CC: Joe Perches Signed-off-by: David S. Miller --- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 964e9c0948bc..3ead111111e1 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1745,6 +1745,12 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; int err; + /* Ensure we have a valid MAC */ + if (!is_valid_ether_addr(adapter->hw.mac.addr)) { + pr_err("Error: Invalid MAC address\n"); + return -EINVAL; + } + /* hardware has been reset, we need to reload some things */ pch_gbe_set_multi(netdev); @@ -2468,9 +2474,14 @@ static int pch_gbe_probe(struct pci_dev *pdev, memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->dev_addr)) { - dev_err(&pdev->dev, "Invalid MAC Address\n"); - ret = -EIO; - goto err_free_adapter; + /* + * If the MAC is invalid (or just missing), display a warning + * but do not abort setting up the device. pch_gbe_up will + * prevent the interface from being brought up until a valid MAC + * is set. + */ + dev_err(&pdev->dev, "Invalid MAC address, " + "interface disabled.\n"); } setup_timer(&adapter->watchdog_timer, pch_gbe_watchdog, (unsigned long)adapter); -- 2.39.5