From 2becc35aa74cbaf9c84e6ae166faab7a321d25ca Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Wed, 4 Jun 2014 08:45:27 +0000 Subject: [PATCH] i40e: Add set_pauseparam to ethtool Add i40e implementation of setpauseparam to ethtool. Change-ID: Ie7766b2091ec8f934737573c9ffd426081966718 Signed-off-by: Catherine Sullivan Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/i40e/i40e_ethtool.c | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 6508a1b64a7e..fc86761950d0 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -457,6 +457,81 @@ static void i40e_get_pauseparam(struct net_device *netdev, } } +/** + * i40e_set_pauseparam - Set Flow Control parameter + * @netdev: network interface device structure + * @pause: return tx/rx flow control status + **/ +static int i40e_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_pf *pf = np->vsi->back; + struct i40e_vsi *vsi = np->vsi; + struct i40e_hw *hw = &pf->hw; + struct i40e_link_status *hw_link_info = &hw->phy.link_info; + bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP; + i40e_status status; + u8 aq_failures; + int err; + + if (vsi != pf->vsi[pf->lan_vsi]) + return -EOPNOTSUPP; + + if (pause->autoneg != ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ? + AUTONEG_ENABLE : AUTONEG_DISABLE)) { + netdev_info(netdev, "To change autoneg please use: ethtool -s autoneg \n"); + return -EOPNOTSUPP; + } + + /* If we have link and don't have autoneg */ + if (!test_bit(__I40E_DOWN, &pf->state) && + !(hw_link_info->an_info & I40E_AQ_AN_COMPLETED)) { + /* Send message that it might not necessarily work*/ + netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n"); + } + + if (hw->fc.current_mode == I40E_FC_PFC) { + netdev_info(netdev, "Priority flow control enabled. Cannot set link flow control.\n"); + return -EOPNOTSUPP; + } + + if (pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = I40E_FC_FULL; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = I40E_FC_RX_PAUSE; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = I40E_FC_TX_PAUSE; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = I40E_FC_NONE; + else + return -EINVAL; + + /* Set the fc mode and only restart an if link is up*/ + status = i40e_set_fc(hw, &aq_failures, link_up); + + if (aq_failures & I40E_SET_FC_AQ_FAIL_GET) { + netdev_info(netdev, "Set fc failed on the get_phy_capabilities call with error %d and status %d\n", + status, hw->aq.asq_last_status); + err = -EAGAIN; + } + if (aq_failures & I40E_SET_FC_AQ_FAIL_SET) { + netdev_info(netdev, "Set fc failed on the set_phy_config call with error %d and status %d\n", + status, hw->aq.asq_last_status); + err = -EAGAIN; + } + if (aq_failures & I40E_SET_FC_AQ_FAIL_UPDATE) { + netdev_info(netdev, "Set fc failed on the update_link_info call with error %d and status %d\n", + status, hw->aq.asq_last_status); + err = -EAGAIN; + } + + if (!test_bit(__I40E_DOWN, &pf->state)) + return i40e_nway_reset(netdev); + + return err; +} + static u32 i40e_get_msglevel(struct net_device *netdev) { struct i40e_netdev_priv *np = netdev_priv(netdev); @@ -1866,6 +1941,7 @@ static const struct ethtool_ops i40e_ethtool_ops = { .get_ringparam = i40e_get_ringparam, .set_ringparam = i40e_set_ringparam, .get_pauseparam = i40e_get_pauseparam, + .set_pauseparam = i40e_set_pauseparam, .get_msglevel = i40e_get_msglevel, .set_msglevel = i40e_set_msglevel, .get_rxnfc = i40e_get_rxnfc, -- 2.39.5