From 2ceec7b25c3cde53c68e49d64950f2ad1cab307d Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:47 +0300 Subject: [PATCH] ARM: OMAP4: vc: fix channel configuration RACEN bit should only be set if the voltage and command register addresses are the same. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 5d5f9e52f89f..d72b787a0d83 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -592,9 +592,12 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) voltdm->rmw(vc->smps_cmdra_mask, vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), vc->smps_cmdra_reg); - vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen; + vc->cfg_channel |= vc_cfg_bits->rac; } + if (vc->cmd_reg_addr == vc->volt_reg_addr) + vc->cfg_channel |= vc_cfg_bits->racen; + /* Set up the on, inactive, retention and off voltage */ on_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->on); onlp_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->onlp); -- 2.39.5