From 2e490139b137bbac3250d594cef3dcbc461ad4cc Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 21 Dec 2015 11:54:46 -0200 Subject: [PATCH] [media] media: i2c: ov2659: speedup probe if no device connected The ov2659 driver performs device detection and initialization in the following way: - send reset command REG_SOFTWARE_RESET - load array of predefined register's setting (~150 values) - read device version REG_SC_CHIP_ID_H/REG_SC_CHIP_ID_L - check version and exit if invalid. As result, for not connected device there will be >~150 i2c transactions executed before device version checking and exit (there are no failures detected because ov2659 declared as I2C_CLIENT_SCCB and NACKs are ignored in this case). Let's fix that by checking the chip version first and start initialization only if it's supported. Cc: Benoit Parrot Signed-off-by: Grygorii Strashko Acked-by: Lad, Prabhakar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ov2659.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c index 02b9a3440557..1f999e9c0118 100644 --- a/drivers/media/i2c/ov2659.c +++ b/drivers/media/i2c/ov2659.c @@ -1321,10 +1321,6 @@ static int ov2659_detect(struct v4l2_subdev *sd) } usleep_range(1000, 2000); - ret = ov2659_init(sd, 0); - if (ret < 0) - return ret; - /* Check sensor revision */ ret = ov2659_read(client, REG_SC_CHIP_ID_H, &pid); if (!ret) @@ -1338,8 +1334,10 @@ static int ov2659_detect(struct v4l2_subdev *sd) dev_err(&client->dev, "Sensor detection failed (%04X, %d)\n", id, ret); - else + else { dev_info(&client->dev, "Found OV%04X sensor\n", id); + ret = ov2659_init(sd, 0); + } } return ret; -- 2.39.5