From 2e5a6e25611e5e03e1ad6993bc7543e4e364f8bf Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Thu, 3 Dec 2015 15:35:24 +0200 Subject: [PATCH] ARM: dts: ifc6410: enable pcie dt node for this board Enable pcie dt node and fill pcie dt node with regulator, pinctrl and reset gpio, to use the pcie on the ifc6410 board. Signed-off-by: Stanimir Varbanov --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index aa9303b84d67..267f75ded63b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -47,6 +47,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -123,6 +135,10 @@ lvs1 { bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; }; }; @@ -231,6 +247,16 @@ status = "okay"; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + qcom,ssbi@500000 { pmic@0 { gpio@150 { -- 2.39.5