From 30693f346e4f5c0720de66c424b38053f9e34a08 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 30 Apr 2015 08:21:14 -0300 Subject: [PATCH] [media] saa7134-i2c: make debug macros to use pr_fmt() Converting debug prints to use pr_foo() is not trivial, as the result will be a way worse than what's provided here, due to the pieces of the code that prints the I2C transfers. Those use a lot pr_cont(), and, depending on using either level 1 or 2, a different set of macros are selected. So, let's replace d1printk() and d2printk() macros by i2c_dbg() and i2c_count() adding a debug level there. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/saa7134/saa7134-i2c.c | 54 ++++++++++++------------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c index 2dcc497fb166..b140143dba7d 100644 --- a/drivers/media/pci/saa7134/saa7134-i2c.c +++ b/drivers/media/pci/saa7134/saa7134-i2c.c @@ -41,8 +41,11 @@ static unsigned int i2c_scan; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); -#define d1printk if (1 == i2c_debug) printk -#define d2printk if (2 == i2c_debug) printk +#define i2c_dbg(level, fmt, arg...) if (i2c_debug == level) \ + printk(KERN_DEBUG pr_fmt("i2c: " fmt), ## arg) + +#define i2c_cont(level, fmt, arg...) if (i2c_debug == level) \ + pr_cont(fmt, ## arg) #define I2C_WAIT_DELAY 32 #define I2C_WAIT_RETRY 16 @@ -90,23 +93,20 @@ static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev) enum i2c_status status; status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f; - d2printk(KERN_DEBUG "%s: i2c stat <= %s\n",dev->name, - str_i2c_status[status]); + i2c_dbg(2, "i2c stat <= %s\n", str_i2c_status[status]); return status; } static inline void i2c_set_status(struct saa7134_dev *dev, enum i2c_status status) { - d2printk(KERN_DEBUG "%s: i2c stat => %s\n",dev->name, - str_i2c_status[status]); + i2c_dbg(2, "i2c stat => %s\n", str_i2c_status[status]); saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status); } static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr) { - d2printk(KERN_DEBUG "%s: i2c attr => %s\n",dev->name, - str_i2c_attr[attr]); + i2c_dbg(2, "i2c attr => %s\n", str_i2c_attr[attr]); saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6); } @@ -169,7 +169,7 @@ static int i2c_reset(struct saa7134_dev *dev) enum i2c_status status; int count; - d2printk(KERN_DEBUG "%s: i2c reset\n",dev->name); + i2c_dbg(2, "i2c reset\n"); status = i2c_get_status(dev); if (!i2c_is_error(status)) return true; @@ -207,7 +207,7 @@ static inline int i2c_send_byte(struct saa7134_dev *dev, // dword |= 0x40 << 16; /* 400 kHz */ dword |= 0xf0 << 24; saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword); - d2printk(KERN_DEBUG "%s: i2c data => 0x%x\n",dev->name,data); + i2c_dbg(2, "i2c data => 0x%x\n", data); if (!i2c_is_busy_wait(dev)) return -EIO; @@ -229,7 +229,7 @@ static inline int i2c_recv_byte(struct saa7134_dev *dev) if (i2c_is_error(status)) return -EIO; data = saa_readb(SAA7134_I2C_DATA); - d2printk(KERN_DEBUG "%s: i2c data <= 0x%x\n",dev->name,data); + i2c_dbg(2, "i2c data <= 0x%x\n", data); return data; } @@ -246,12 +246,12 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, if (!i2c_reset(dev)) return -EIO; - d2printk("start xfer\n"); - d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name); + i2c_dbg(2, "start xfer\n"); + i2c_dbg(1, "i2c xfer:"); for (i = 0; i < num; i++) { if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) { /* send address */ - d2printk("send address\n"); + i2c_dbg(2, "send address\n"); addr = msgs[i].addr << 1; if (msgs[i].flags & I2C_M_RD) addr |= 1; @@ -263,50 +263,50 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, * needed to talk to the mt352 demux * thanks to pinnacle for the hint */ int quirk = 0xfe; - d1printk(" [%02x quirk]",quirk); + i2c_cont(1, " [%02x quirk]",quirk); i2c_send_byte(dev,START,quirk); i2c_recv_byte(dev); } - d1printk(" < %02x", addr); + i2c_cont(1, " < %02x", addr); rc = i2c_send_byte(dev,START,addr); if (rc < 0) goto err; } if (msgs[i].flags & I2C_M_RD) { /* read bytes */ - d2printk("read bytes\n"); + i2c_dbg(2, "read bytes\n"); for (byte = 0; byte < msgs[i].len; byte++) { - d1printk(" ="); + i2c_cont(1, " ="); rc = i2c_recv_byte(dev); if (rc < 0) goto err; - d1printk("%02x", rc); + i2c_cont(1, "%02x", rc); msgs[i].buf[byte] = rc; } /* discard mysterious extra byte when reading from Samsung S5H1411. i2c bus gets error if we do not. */ if (0x19 == msgs[i].addr) { - d1printk(" ?"); + i2c_cont(1, " ?"); rc = i2c_recv_byte(dev); if (rc < 0) goto err; - d1printk("%02x", rc); + i2c_cont(1, "%02x", rc); } } else { /* write bytes */ - d2printk("write bytes\n"); + i2c_dbg(2, "write bytes\n"); for (byte = 0; byte < msgs[i].len; byte++) { data = msgs[i].buf[byte]; - d1printk(" %02x", data); + i2c_cont(1, " %02x", data); rc = i2c_send_byte(dev,CONTINUE,data); if (rc < 0) goto err; } } } - d2printk("xfer done\n"); - d1printk(" >"); + i2c_dbg(2, "xfer done\n"); + i2c_cont(1, " >"); i2c_set_attr(dev,STOP); rc = -EIO; if (!i2c_is_busy_wait(dev)) @@ -317,12 +317,12 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, /* ensure that the bus is idle for at least one bit slot */ msleep(1); - d1printk("\n"); + i2c_cont(1, "\n"); return num; err: if (1 == i2c_debug) { status = i2c_get_status(dev); - printk(" ERROR: %s\n",str_i2c_status[status]); + i2c_cont(1, " ERROR: %s\n", str_i2c_status[status]); } return rc; } -- 2.39.5